journal article·2001-04

A Comparative Study of Plasma Sprayed Coatings on Railway Brake Discs

H. Bartys, J.D. Guerin, M. Watremez, J.P. Bricout

Surface Engineering· Volume 17· Issue 2
Publisher page

Abstract

In the railway context, increasing the number of trains in service relies in the development of new equipment. This objective requires increased peak speeds at the expense of stronger motorisations. The axle loads are thus heavier, especially for the new double-decker trains. These parameters have significant effects on the brake system in terms of size, non-suspended masses, and therefore energies to be dissipated. The constituent materials of the friction brakes of some railway equipment (full non-ventilated steel alloy discs for the TGV, for example) have thus reached their technological limits in terms of energy to be dissipated for fixed mass and size. It is therefore necessary to find more powerful braking devices using new materials. The Laboratoire d'Automatique et de Mécanique Industrielles et Humaines (LAMIH) has therefore decided to focus its research towards high energy full discs. This approach consists of coating the steel discs with low thermal diffusivity friction materials that have very strong and stable mechanical and tribological characteristics at high temperature. Using blown thermal plasma, the LAMIH has already tested reduced scale C38 discs coated with NiCr–Cr3 C2 cermet facing an Al2 TiO5 pad. Henceforth, studies relate to cobalt or nickel based superalloys obtained by the transferred plasma process with a view to making a reliable coating–substrate bond. Performance is evaluated in terms of friction factor, wear, contact temperature, and reliability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

the Laboratoire d'Automatique et de Mécanique Industrielles et Humaines (LAMIH), UMR CNRS 8530, Université de Valenciennes et du Hainaut-Cambrésis, Le Mont Houy, BP 311–59313 Valenciennes, Cedex 9, France

References (13)

Show source-provided references
1. GIARIN J. D. · 1997 · 97
2. 10.1115/1.283155810.1115/1.2831558 ↗
3. 10.1021/ie50051a00610.1021/ie50051a006 ↗
4. Aust. Eng. · 1956 · 48 · 47
5. 1993
6. WATREMEZ M., MARIN J. D., BONEILL C., and BRICOUT J. P. ‘Journées Européennes du Freinage‘, 43–50; 1998, Lille, AGIR (in French).
7. WATREMEZ M., DROBECQ V., GIARIN J. D., and BRICOUT J. P. ‘Frottement — usure: conception et tests des solutions industri-elles‘, CETIM, Senlis, 15–16 December 1998 (in French).
8. CARSLAW H. S. · 1959
9. BLAU R J. ‘Friction and wear transitions of materials: break-in, run-in, and wear-in’, 268–351; 1989, Park Ridge, NJ, Noyes Publications.
10. KOMBALOV v. S. · Trenie Iznos · 1980 · 1 · 440
11. 10.1016/S0043-1648(97)00092-610.1016/S0043-1648(97)00092-6 ↗
12. WATREMEZ M. · 1995
13. BARTYS H., MARIN J. D., BRICOUT J. P., and OUDIN J.: Proc. 15th Int. Thermal Spray Conference (ITSC’98), Nice, France, 25–29 May 1998, ASM International, Vol. 2, 1127–1132.10.31399/asm.cp.itsc1998p1127 ↗