journal article·2015-04

Oxidation behaviour of glass–quartz and glass–quartz–aluminium composite coatings on Ti–6Al–4V alloy

Z. Xiao, F. Tan, W. Wang, H. Lu, Y. Cai, X. Qiu, J. Chen, X. Qiao

Surface Engineering· Volume 31· Issue 5
Publisher page

Abstract

Glass–quartz and glass–quartz–aluminium composite coatings were successfully produced on Ti–6Al–4V alloy by slurry method. The oxidation behaviour of the specimens at 800°C for 100 h was studied. Both composite coatings exhibited good high temperature oxidation resistance. After oxidation for 100 h, quartz and diopside were main crystalline phases in the glass–quartz composite coating. Some open pores appeared on the surface of the glass–quartz composite coating, which might be related to the intensive crystallisation of diopside in the composite coating. While in the glass–quartz–aluminium composite coating, no open pores could be seen, and some new phases such as silicon and alumina were observed. The silicon and alumina phases might be originated from the reaction between glass and molten aluminium. Because of this, incorporation of aluminium particles into the composite coating slows the nucleation and growth rate of diopside.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Materials Processing and Die & Mould Technology Huazhong University of Science and Technology, Wuhan 430074, China

Nanomaterials Research Center Nanchang Institute of Technology, Nanchang 330013, China

References (28)

Show source-provided references
1. 10.1016/j.surfcoat.2005.11.12510.1016/j.surfcoat.2005.11.125 ↗
2. 10.1002/adem.20031009510.1002/adem.200310095 ↗
3. 10.1179/174329407X26056410.1179/174329407X260564 ↗
4. 10.1016/j.corsci.2013.04.04110.1016/j.corsci.2013.04.041 ↗
5. 10.1016/j.corsci.2013.05.01010.1016/j.corsci.2013.05.010 ↗
6. 10.1007/BF0302750010.1007/BF03027500 ↗
7. 10.1016/S0257-8972(98)00574-X10.1016/S0257-8972(98)00574-X ↗
8. 10.1016/j.surfcoat.2011.08.06310.1016/j.surfcoat.2011.08.063 ↗
9. 10.1016/j.cap.2009.09.00310.1016/j.cap.2009.09.003 ↗
10. 10.1016/j.jmatprotec.2007.03.07010.1016/j.jmatprotec.2007.03.070 ↗
11. 10.1016/j.ceramint.2013.09.06210.1016/j.ceramint.2013.09.062 ↗
12. 10.1016/j.jallcom.2007.10.01710.1016/j.jallcom.2007.10.017 ↗
13. 10.1007/s10971-011-2527-310.1007/s10971-011-2527-3 ↗
14. 10.1016/j.surfcoat.2008.12.02910.1016/j.surfcoat.2008.12.029 ↗
15. 10.1016/j.surfcoat.2010.04.00810.1016/j.surfcoat.2010.04.008 ↗
16. 10.1016/j.surfcoat.2012.12.02210.1016/j.surfcoat.2012.12.022 ↗
17. 10.1111/j.1551-2916.2011.04587.x10.1111/j.1551-2916.2011.04587.x ↗
18. 10.1016/j.ceramint.2010.02.04010.1016/j.ceramint.2010.02.040 ↗
19. 10.1016/j.ijhydene.2012.05.13010.1016/j.ijhydene.2012.05.130 ↗
20. 10.1016/j.ijhydene.2012.12.07410.1016/j.ijhydene.2012.12.074 ↗
21. 10.1016/j.jpowsour.2008.08.08110.1016/j.jpowsour.2008.08.081 ↗
22. 10.1016/j.ceramint.2013.09.07910.1016/j.ceramint.2013.09.079 ↗
23. 10.1016/j.jallcom.2009.06.17210.1016/j.jallcom.2009.06.172 ↗
24. 10.1016/S0272-8842(01)00067-010.1016/S0272-8842(01)00067-0 ↗
25. 10.2320/matertrans.46.258210.2320/matertrans.46.2582 ↗
26. 10.1111/j.1551-2916.2008.02479.x10.1111/j.1551-2916.2008.02479.x ↗
27. 10.1016/j.jeurceramsoc.2012.07.03610.1016/j.jeurceramsoc.2012.07.036 ↗
28. 10.1016/j.corsci.2013.07.00110.1016/j.corsci.2013.07.001 ↗