journal article·2016-04

Combinatorial synthesis of Cr1 − xAlxN and Ta1 − xAlxN coatings using industrial scale co-sputtering

N. Schalk, T. Weirather, C. Sabitzer, S. Hirn, V. L. Terziyska, S. Gangopadhyay, C. Czettl, P. Polcik, M. Kathrein, C. Mitterer

Surface Engineering· Volume 32· Issue 4
Publisher page

Abstract

For a comprehensive understanding of the scientific relations between composition, microstructure and properties of hard coatings usually a multitude of deposition runs is necessary. Within the present work, a combinatorial deposition approach using triangular shaped segmented sputter targets was adapted for an industrial scale sputter system. Owing to the position of the substrates relative to the target segments, a wide range of compositions can be achieved within a single deposition run. To verify this concept, Cr1 − xAlxN reference coatings and Ta1 − xAlxN coatings, each with a base layer of TiAlN (i.e. a bilayer configuration), were synthesised. The effect of the varying chemical compositions on the structure and mechanical as well as tribological properties was investigated. This approach enables to efficiently identify promising coating compositions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physical Metallurgy and Materials Testing, Montanuniversität, Leoben, Franz-Josef-Straße 18, 8700 Leoben, Austria

Present address: PLANSEE Composite Materials GmbH, Siebenbürger-straße 23, 86983 Lechbruck am See, Germany

Present address: Institute of Materials Science and Welding, Graz University of Technology, opernikusgasse 24, 8010 Graz, Austria

Department of Mechanical Engineering, National Institute of Technology, Rourkela-769008, Orissa, India

CERATIZIT Austria GmbH, Metallwerk-Plansee-Straße 71, 6600 Reutte, Austria

PLANSEE Composite Materials GmbH, Siebenbürgerstraße 23, 86983 Lechbruck am See, Germany

Present address: PLANSEE SE, Metallwerk-Plansee-Straße 71, 6600 Reutte, Austria

References (21)

Show source-provided references
1. 10.1116/1.144851010.1116/1.1448510 ↗
2. 10.1016/j.surfcoat.2005.08.07210.1016/j.surfcoat.2005.08.072 ↗
3. 10.1016/j.surfcoat.2005.01.04310.1016/j.surfcoat.2005.01.043 ↗
4. 10.2320/matertrans.MRA200860410.2320/matertrans.MRA2008604 ↗
5. 10.1007/s11249-011-9876-510.1007/s11249-011-9876-5 ↗
6. 10.1016/j.surfcoat.2011.10.02310.1016/j.surfcoat.2011.10.023 ↗
7. 10.1179/02670840110151765610.1179/026708401101517656 ↗
8. 10.1016/j.surfcoat.2012.09.05510.1016/j.surfcoat.2012.09.055 ↗
9. 10.1007/s11249-008-9313-610.1007/s11249-008-9313-6 ↗
10. 10.1016/j.tsf.2012.04.06210.1016/j.tsf.2012.04.062 ↗
11. 10.1016/j.surfcoat.2013.05.02210.1016/j.surfcoat.2013.05.022 ↗
12. 10.1016/j.surfcoat.2012.02.04910.1016/j.surfcoat.2012.02.049 ↗
13. Brandes E. A. ‘Smithells Metals Reference Book’, 6th edn. 1983, Stoneham, Butterworth Publishers.
14. 10.1088/0022-3727/43/3/03530210.1088/0022-3727/43/3/035302 ↗
15. 10.1016/0092-640X(84)90016-010.1016/0092-640X(84)90016-0 ↗
16. International Center for Diffraction Data, PDF-2/Release 2007, card numbers 00-025-1495, 03-065-2899, 00-038-1420, 00-049-1283, 01-076-0702.
17. 10.1116/1.150378410.1116/1.1503784 ↗
18. 10.1116/1.273849210.1116/1.2738492 ↗
19. 10.1179/1743294412Y.000000010010.1179/1743294412Y.0000000100 ↗
20. 10.1007/s11249-006-9064-110.1007/s11249-006-9064-1 ↗
21. 10.1016/j.surfcoat.2014.01.01010.1016/j.surfcoat.2014.01.010 ↗