journal article·1988-01

Optimisation of Deposition Parameters for Desired Mechanical and Frictional Properties of Reactively Sputtered TinX Films

R. R. Manory

Surface Engineering· Volume 4· Issue 4
Publisher page

Abstract

A series of experiments for optimising titanium nitride films deposited on various substrates is described. The target to specimen distance was found to affect the deposition rate, the lattice parameter, and the microhardness of the films. The surface preparation was found to affect the form of the X-ray diffractograms obtained from the films. Optimisation of the films was based on maximum microhardness and not on maximum deposition rates. Microhardness values of (111) oriented films deposited on different substrates after such an optimisation exceeded 3300 HV(3g). The friction coefficient of these hard films against diamond was found to be in the range 0.06-0.14.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Manufacturing and Process Engineering, Royal Melbourne Institute of technology, Melbourne, Australia (formerly NASA-NRC Research Associate, Lewis Research Center, Cleveland, OH, USA).

References (27)

Show source-provided references
1. BUNSHAH R. F. · High Temp. High Press. · 1978 · 10 · 287
2. BRAINARD w. A. · 1977
3. MANORY R. · Plat. Surf Finish. · 1986 · 73 · 68
4. MATTHEWS A. · Proc. Int. Conf. ISIAT ’83/IPAT ’83 · 1983 · 1325
5. 10.1016/0040-6090(85)90322-010.1016/0040-6090(85)90322-0 ↗
6. WITTMER M. · J. Vac. Sci. Technol. · 1797 · 1985 · A3
7. 10.1016/0040-6090(85)90319-010.1016/0040-6090(85)90319-0 ↗
8. 10.1016/0040-6090(85)90333-510.1016/0040-6090(85)90333-5 ↗
9. 10.1016/0040-6090(85)90162-210.1016/0040-6090(85)90162-2 ↗
10. 10.1016/0040-6090(83)90016-010.1016/0040-6090(83)90016-0 ↗
11. 10.1179/sur.1987.3.3.23310.1179/sur.1987.3.3.233 ↗
12. 10.1116/1.57408510.1116/1.574085 ↗
13. 10.1016/0040-6090(84)90206-210.1016/0040-6090(84)90206-2 ↗
14. RAMALINGAM S. · Proc. 13th Int. Conf. on ‘Metallurgical coatings’ · 1986
15. SPALVINS T.: in ‘Engineering design’, Proc. 25th Meeting of Mechanical Failures Group, 324; 1977, Gaithersburg, MD, NBS.
16. ToTH L. E. ‘Transition metal carbides and nitrides’, chap. 2; 1971, London, New York, Academic Press.
17. Joint Committee of Powder Diffraction Standards Card 6-0642.
18. 10.1107/S002188987500954510.1107/S0021889875009545 ↗
19. CHEVALLIER J. · Proc. Int. Conf. IPAT ’81 · 1981
20. AVNI R. · 1984
21. 10.1016/0040-6090(85)90259-710.1016/0040-6090(85)90259-7 ↗
22. PERRY A. J. · J. Vac. Sci. Technol. · 1987 · 4 · 280110.1116/1.573682 ↗
23. SUNDGREN J. E. · PhD thesis · 1982
24. 10.1016/0040-6090(78)90011-110.1016/0040-6090(78)90011-1 ↗
25. HABIG K. H. · Z. Werkstolf-tech. · 1980 · 11 · 182
26. MAKELLA K. · Proc. Nordtrib Conf. · 1984
27. 10.1016/0040-6090(83)90004-410.1016/0040-6090(83)90004-4 ↗