journal article·2001-12

Influence of Laser Surface Preparation on Adhesion of Thermally Sprayed Coatings

F. Folio, J. Michler, G. Barbezat

Surface Engineering· Volume 17· Issue 6
Publisher page

Abstract

Laser treatment was used to prepare substrate surfaces for thermal spray deposition. The interaction between aluminium and titanium alloys and short Nd: YAG laser pulses was investigated. In particular, the topography of laser treated surfaces has been observed and analysed using scanning electron microscopy, atomic force microscopy, and laser profilometry. The coating/substrate adhesion was quantified for various surface preparation parameters by means of tensile tests and Rockwell indentations for Al2O3–13 wt-%TiO2 coatings. The influences of the laser energy density and the time interval between the laser treatment and the plasma spraying were studied. Compared with conventional degreasing and grit blasting, laser treatment produces better adhesion. The mechanisms of adhesion after laser treatment were investigated by transmission electron microscopy and electron energy loss spectrometry for a pure copper coating on a pure aluminium substrate. It appears that the adhesion is owing to metallurgical bonding.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Swiss Federal Institute of Technology (EPFL)Lausanne, Switzerland (frederic.folio@power.alstom.com)

Sulzer-Metco AG, Wohlen, Switzerland

References (6)

Show source-provided references
1. WIGREN J. ‘Thermal spray: advances in coating technology’, 99; 1988, Materials Park, OH, ASM International.
2. FOLIO F., MICHLER J., BARBEZAT G., and BLANK E. ‘Progress in polasma processing of materials’; (ed. Fouchais P.), 513–518; 2001, New York, NY, Begell House.
3. 10.1016/S0925-9635(98)00336-710.1016/S0925-9635(98)00336-7 ↗
4. FOLIO F., MICHLER J., BARBEZAT G., and BLANK E.: Proc. 5th ELM Adhesion Conf., Lyon, France, Sept. 2000, Société Française du Vide, 534–539.
5. FOLIO F., KURZ W., and BARBEZAT G.: Proc. 7th Eur. Conf. On Laser Treatment on Materials, Hanover, Germany, Sept. 1998; (ed. Mordike B. L.), 151–156; 1998, Werkstoff-information-gesellschaft.
6. RAPPAZ M., CORRIGAN D., and BOATNER L. A. ‘Modeling of casting, welding and advanced solidification processes VIII’, (ed. Thomas B., and Beckermann C.); 1998, Warrendale, PA, TMS.