Microstructural, mechanical and tribological behaviour of powder metallurgy processed SiC and RHA reinforced Al-based composites
Source abstract
Abstract
Abstract This study aims to fabricate and evaluate the behaviour of Aluminium matrix composites (AMCs) reinforced with Rice husk ash (RHA) and Silicon carbide (SiC). The AMCs consisting of varied weight ratios of RHA (0, 5, 10 & 15 wt.%) and SiC (10 wt.%) were produced using the powder metallurgy process. The microstructural characteristics were examined by Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and Energy Dispersive X-ray spectroscope (EDS) elemental mapping. Dry sliding wear, hardness, density and percentage of porosity were evaluated for the produced composites. Dry sliding wear tests were carried out on the AMCs to evaluate the wear loss and coefficient of friction as function of RHA content by sliding against a steel counter-face. Furthermore, sliding loads, sliding distances and sliding velocities were selected as control factors with three levels and the wear loss was selected as a response to evaluate the dry sliding performance of the Al, Al+10%SiC and Al+10%SiC+10%RHA composites. Microstructural observation depicted a homogenous dispersion of SiC and RHA particles in the composite except for 15% RHA composite where clustering of RHA particles were observed. The mechanical and tribological study showed that the hardness and wear properties of the AMCs increased with an increase in RHA contents up to 10% and then decreased. The worn surface and wear debris was analysed using SEM and wear mechanism was reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. P/M aluminum matrix composites: an overview10.1016/S0924-0136(02)00234-0 ↗
2. Processing issues, machining, and applications of aluminum metal matrix composites10.1080/10426914.2017.1401713 ↗
3. Characterization of hybrid aluminum matrix composites for advanced applications – a review10.1016/j.jmrt.2015.05.004 ↗
4. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics10.1016/j.jmrt.2015.05.003 ↗
5. Composites of aluminium alloys: fabrication and wear behaviour10.1007/BF00591483 ↗
6. Mechanical properties of particulate reinforced aluminium alloy matrix composite10.1016/0001-6160(89)90037-0 ↗
7. 21 - Aluminium powder metallurgy
8. Properties of aluminum matrix Nano composites prepared by powder metallurgy processing10.1016/j.jksues.2015.11.001 ↗
9. Characteristic behaviour of aluminium metal matrix composites : a review
10. Chawla · 2013
11. Liquid metallurgy processing of intermetallic matrix composites
12. Particulate reinforced metal matrix composites - a review10.1007/BF00544448 ↗
13. Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives10.1080/10643389.2015.1077067 ↗
14. Microstructural characteristics, mechanical and wear behavior of aluminium matrix hybrid composites reinforced ...
15. Effect of rice husk ash on properties of aluminium alloys: a review
16. Corrosion and wear behaviour of Al – Mg – Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide
17. Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite10.1016/j.jallcom.2018.01.185 ↗
18. Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing10.1016/j.coco.2017.02.001 ↗
19. Mechanical characterization of aluminium metal matrix composite reinforced with aloe vera powder
20. Microstructure and mechanical behavior of stir-cast Zn – 27Al based composites reinforced with rice husk ash, silicon carbide, and graphite10.1016/j.jksues.2015.06.004 ↗
21. Dry sliding wear behavior of palmyra shell ash – reinforced aluminum matrix (AlSi10Mg) composites dry sliding wear behavior of palmyra shell ash – reinforced aluminum matrix10.1080/10402004.2016.1178362 ↗
22. Shaikh · Mater. Res. Express · 2018 · 510.1088/2053-1591/aab829 ↗
23. Experimental evaluation onto the damping behavior of Al/SiC/RHA hybrid composites10.1016/j.jmrt.2015.08.001 ↗
24. Prediction of tribological behaviour of rice husk ash reinforced aluminum alloy matrix composites using artificial neural network 110.3103/S1067821215010174 ↗
25. Effect of hybridizing and optimization of TiC on the tribological behavior of Mg – MoS2 composites10.1115/1.4035383 ↗
26. A novel aluminum based nanocomposite with high strength and good ductility10.1016/j.jallcom.2015.07.088 ↗
27. 2014 and 6061 aluminium alloy-based powder metallurgy composites containing silicon carbide particles/fibres10.1016/0261-3069(96)00015-5 ↗
28. Microstructure and mechanical properties of Mg-Al alloys with in situ Al4C3 phase synthesised by CO2 incorporation during liquid state processing Microstructure and mechanical properties of Mg – Al alloys with in situ Al4C3 phase synthesised by CO2
29. Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and arti fi c10.1088/2053-1591/aabec8 ↗
30. Properties of alumina with RHA-reinforced aluminum composite using different sintering profile10.1007/s41779-017-0024-z ↗
31. Mullite (3Al2O3 2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure10.1016/j.jascer.2015.11.003 ↗
32. Tribology in industry softening resistance, dimensional stability and corrosion behaviour of alumina and rice husk ash reinforced aluminium matrix composites subjected to thermal cycling
33. Khan · J. Mater. Res. · 2017 · 32 · 205510.1557/jmr.2017.111 ↗
34. Study of Al composites prepared by high-energy ball milling; effect of processing conditions10.1016/j.jallcom.2015.01.018 ↗
35. Aluminum-4 mass% copper / alumina composites produced from aluminum copper and rice husk ash silica powders by powder forging10.2320/matertrans.M2009429 ↗
36. Development of high volume rice husk ash alumino silicate composites10.1007/s12613-010-0370-0 ↗
37. Determination of silica activity index and XRD, SEM and EDS studies of amorphous SiO2 extracted from rice husk ash determination of silica activity index and XRD, SEM and EDS studies of amorphous SiO2 extracted from rice husk ash10.1007/s12666-011-0071-z ↗
38. Dry sliding wear and friction behavior of aluminum-rice husk ash composite using Taguchi's technique10.1177/0021998314545185 ↗
39. Fabrication characteristics and mechanical behaviour of rice husk ash - alumina reinforced Al-Mg-Si alloy matrix hybrid composites10.1016/j.jmrt.2013.03.012 ↗
40. Effect of particle size on tribological behavior of rice husk ash-reinforced aluminum alloy (alsi10mg) matrix composites10.1080/10402004.2013.831962 ↗
41. Hybrid composites - a better choice for high wear resistant materials10.1016/j.jmrt.2014.03.004 ↗
42. Sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting10.1016/j.jascer.2017.03.005 ↗
43. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
44. Dry sliding wear of aluminium composites - a review10.1016/S0266-3538(96)00167-4 ↗
45. Tribological properties of powder metallurgy - processed aluminium self lubricating hybrid composites with SiC additions10.1016/j.matdes.2012.09.015 ↗
46. Aluminium composites and further improvement in their tribological properties - a review
47. Properties of ceramic-reinforced aluminium matrix composites - a review10.1186/s40712-014-0012-9 ↗
48. Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables10.1016/j.ceramint.2015.08.150 ↗
49. An overview of diversified reinforcement on aluminum metal matrix composites : tribological aspects10.1177/1350650116658572 ↗
50. Fabrication characteristics and tribological behavior of Al / SiC / Gr hybrid aluminum matrix composites : a review10.1007/s40544-016-0116-8 ↗
51. Effects of reinforcement on wear resistance of aluminum matrix composites10.1016/S1003-6326(16)64125-0 ↗