journal article·2022-10Open access

Tuning up sol-gel process to achieve highly durable superhydrophobic coating

Ra'na Rafiei Hashjin, Zahra Ranjbar, Hossein Yari, Gelareh Momen

Abstract

Considering practical application of hydrophobic coatings, their durability is a matter of issue. Existing routes for mitigating the problem might not be applicable due to suggesting expensive facilities and non-eco-friendly materials. This paper introduces a robust, scalable cost-effective sol-gel route to obtain a durable superhydrophobic coating. Main component of the sol included Tetraethyl orthosilicate and Methyltriethoxysilane as sol matrix, Triethoxyoctylsilane as a low surface energy precursor, and fumed silica nanoparticles for roughness formation. A coating with a contact angle of 160° and very low sliding angle (<1°) was fabricated. The robustness of the coating was highly improved by incorporating sols with different pH values and spraying them alternately on glass substrate. As a result, the longevity of superhydrophobic behavior doubled under accelerated weathering conditions and reached 1500 h, which could be considered as a promising weathering durability. The coating retained its hydrophobicity after three runs of peeling tape test and 26 min continuous slurry erosion. Regarding sol-gel technique, the research demonstrated how to boost the durability of a superhydrophobic coating by only utilizing chemical characteristics of the sols and incorporating available facilities with non-fluoro based materials. The reaction mechanisms during the sol-gel process and the effect of each component on final properties were thoroughly discussed and fundamentally correlated to the obtained results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Aerogels and thermal insulation · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
2. Superhydrophobic surfaces: a review on fundamentals, applications, and challenges10.1007/s11998-017-0011-x ↗
3. Recent advances in durability of superhydrophobic self-cleaning technology: a critical review
4. On water repellency10.1039/b501657f ↗
5. Wetting and Superhydrophobicity †10.1021/la903043a ↗
6. Fine-tuning of superhydrophobicity based on monolayers of well-defined raspberry nanoparticles with variable dual-roughness size and ratio10.1002/adfm.201400111 ↗
7. Roles of silanes and silicones in forming superhydrophobic and superoleophobic materials10.1039/C6TA05441B ↗
8. Fabrication of superhydrophobic PET filter material with fluorinated SiO2 nanoparticles via simple sol–gel process10.1007/s10971-021-05483-4 ↗
9. Surface morphological and topographical analysis of multifunctional superhydrophobic sol-gel coatings10.1016/j.ceramint.2021.07.115 ↗
10. One-pot fabrication of superhydrophobic and flame-retardant coatings on cotton fabrics via sol-gel reaction10.1016/j.jcis.2018.08.060 ↗
11. Processing effects on the kinetics morphology and properties of hybrid sol-gel superhydrophobic coatings
12. Low-temperature silane coupling agent modified biomimetic micro/nanoscale roughness hierarchical structure superhydrophobic polyethylene terephthalate filter media10.1002/pat.5628 ↗
13. Bristle worm inspired ultra-durable superhydrophobic coating with repairable microstructures and anti-corrosion/scaling properties10.1016/j.cej.2022.135273 ↗
14. Advances in the fabrication of superhydrophobic polymeric surfaces by polymer molding processes10.1021/acs.iecr.0c00508 ↗
15. Bioinspired ribbed hair arrays with robust superhydrophobicity fabricated by micro/nanosphere lithography and plasma etching10.1039/C5RA18439H ↗
16. Stability of the hydrophilic and superhydrophobic properties of oxygen plasma-treated poly(tetrafluoroethylene) surfaces10.1016/j.jcis.2012.12.072 ↗
17. Wetting and self-cleaning properties of silicone rubber surfaces treated by atmospheric plasma Jet
18. Fabrication of icephobic aluminium surfaces by atmospheric plasma jet polymerisation10.1080/02670844.2018.1509813 ↗
19. Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach10.1016/j.surfcoat.2019.07.005 ↗
20. Superhydrophobic and deacidified cellulose/CaCO3-derived granular coating toward historic paper preservation10.1016/j.ijbiomac.2022.02.179 ↗
21. Hexamethyldisiloxane coating by plasma to create a superhydrophobic surface for fabric masks10.1016/j.jmrt.2022.01.003 ↗
22. Modulating vectored non-covalent interactions for layered assembly with engineerable properties
23. Corrosion resistance and long-term durability of super-hydrophobic nickel film prepared by electrodeposition process10.1016/j.apsusc.2014.03.123 ↗
24. Corrosion inhibition of biomimetic super-hydrophobic electrodeposition coatings on copper substrate10.1016/j.corsci.2015.02.009 ↗
25. Polystyrene assisted superhydrophobic silica coatings with surface protection and self-cleaning approach10.1016/j.porgcoat.2017.01.016 ↗
26. Ice repellency behaviour of superhydrophobic surfaces: effects of atmospheric icing conditions and surface roughness10.1016/j.apsusc.2015.04.180 ↗
27. Conformal switchable superhydrophobic/hydrophilic surfaces for microscale flow control10.1016/j.colsurfa.2008.09.044 ↗
28. Effect of pre-treatment on roughness and hydrophobicity of electro-etched steel with improved corrosion resistance10.1007/s11665-020-05074-4 ↗
29. Recent progress in the preparation, properties and applications of superhydrophobic nano-based coatings and surfaces: a review10.1016/j.porgcoat.2019.03.042 ↗
30. Superhydrophobic modification and characterization of cashmere fiber surfaces by wet coating techniques of silica nanoparticles
31. 2015
32. Double-layer tri-wavelength hydrophobic antireflective coatings derived from methylated silica nanoparticles and hybrid silica nanoparticles10.1007/s10971-018-4642-x ↗
33. Transparent, thermally stable and mechanically robust superhydrophobic surfaces made from porous silica capsules10.1002/adma.201100410 ↗
34. Improved adhesion of superhydrophobic layer on metal surfaces via one step spraying method10.1016/j.arabjc.2015.12.011 ↗
35. Klein · 2018
36. Structure and properties of sol-gel coatings from methyltriethoxysilane and tetraethoxysilane10.1007/BF00490148 ↗
37. Study of the effects of progressive changes in alkoxysilane structure on sol-gel reactivity10.1021/jp060376k ↗
38. Enhanced weathering performance of epoxy/ZnO nanocomposite coatings via functionalization of ZnO UV blockers with amino and glycidoxy silane coupling agents
39. Fabrication of a highly hard yet tough epoxy nanocomposite coating by incorporating graphene oxide nanosheets dually modified with amino silane coupling agent and hyperbranched polyester-amide
40. Silane nanofilm formation by sol-gel processes for promoting adhesion of waterborne and solvent-borne coatings to wood surface10.1515/hf-2015-0072 ↗
41. Scrutinizing the importance of surface chemistry versus surface roughness for aluminium /sol-gel film adhesion
42. S. Rastegar, Z. Ranjbar, H.Y. Ahmadabadi, Diffusion limited behaviour of hydrophobised thin UV-curable nanocomposite coatings against model electrolyte, 10.1179/1743278214Y.0000000247. 50 (2015) 517–524. 10.1179/1743278214Y.0000000247.10.1179/1743278214Y.0000000247 ↗
43. Innocenzi · 2016 · 7
44. B.K. Coltrain, L.W. Kelts, The chemistry of hydrolysis and condensation of silica sol—gel precursors, (1994) 403–418. 10.1021/BA-1994-0234.CH019.10.1021/ba-1994-0234.ch019 ↗
45. Cluster dynamics, growth and syneresis during silica hydrogel polymerisation10.1016/S0009-2614(00)00241-4 ↗
46. Wettability study of super-hydrophobic silica aerogel powders
47. Mechanisms of ice formation and propagation on superhydrophobic surfaces: a review10.1016/j.cis.2020.102155 ↗
48. Lotus-leaf-inspired hierarchical structured surface with non-fouling and mechanical bactericidal performances10.1016/j.cej.2020.125609 ↗
49. Superhydrophobic coatings and their durability10.1080/10426914.2015.1090600 ↗
50. Facile spraying fabrication of highly flexible and mechanically robust superhydrophobic F-SiO2@PDMS coatings for self-cleaning and drag-reduction applications10.1039/C8NJ04275F ↗
51. Development of durable self-cleaning coatings using organic-inorganic hybrid sol-gel method10.1016/j.apsusc.2015.03.105 ↗
52. Durable and self-healing superamphiphobic coatings repellent even to hot liquids10.1039/C5CC09951J ↗
53. Mechanically robust superhydrophobic and superoleophobic coatings derived by sol–gel method10.1016/j.matdes.2015.10.053 ↗
54. Developing hydrophobic and superhydrophobic TiO2 coatings by plasma spraying10.1016/j.surfcoat.2016.01.029 ↗
55. An effective method to significantly enhance the robustness and adhesion-to-substrate of high transmittance superamphiphobic silica thin films10.1039/C4TA03533J ↗
56. Superhydrophobic organosilicon-based coating system by a novel ultravoilet-curable method
57. Roles of silanes and silicones in forming superhydrophobic and superoleophobic materials10.1039/C6TA05441B ↗
58. Superhydrophobic behavior of coatings based on fluoroalkyl methacrylate copolymers on a textured aluminum surface
59. Are Fluoropolymers really of low concern for human and environmental health and separate from other PFAS?10.1021/acs.est.0c03244 ↗
60. Comparison between wet deposition and plasma deposition of silane coatings on aluminium10.1016/j.porgcoat.2010.04.009 ↗
61. The role of roughness in Random superhydrophobic surfaces
62. Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces10.1016/j.triboint.2003.11.010 ↗
63. Remarkably simple fabrication of superhydrophobic surfaces using electroless galvanic deposition10.1002/anie.200604596 ↗
64. Superhydrophobic durable coating based on UV-photoreactive silica nanoparticles10.1002/app.41122 ↗
65. Durable ultra-hydrophobic surfaces for self-cleaning applications10.1002/pat.1208 ↗
66. Durable superhydrophobic and antireflective surfaces by trimethylsilanized silica nanoparticles-based sol−gel processing10.1021/la804166t ↗
67. Multifunctional cobalt coating with exceptional amphiphobic properties: self-cleaning and corrosion inhibition
68. Wypych · 2013
69. Transparent, superhydrophobic surfaces from one-step spin coating of hydrophobic nanoparticles10.1021/am201750h ↗
70. Fabrication of a transparent superamphiphobic coating with improved stability10.1039/c1sm05574g ↗
71. Facile preparation of durable and robust superhydrophobic textiles by dip coating in nanocomposite solution of organosilanes10.1039/c3cc43238f ↗
72. A superhydrophobic solar selective absorber used in a flat plate solar collector10.1039/C7RA04238H ↗
73. Temperature dependent switchable superamphiphobic coating on steel alloy surface10.1016/j.jallcom.2017.08.249 ↗
74. Petal effect: a superhydrophobic state with high adhesive force10.1021/la703821h ↗
75. Facile adhesion-tuning of superhydrophobic surfaces between “Lotus” and “Petal” effect and their influence on icing and deicing properties10.1021/acsami.6b16444 ↗
76. Superhydrophobic states10.1038/nmat924 ↗
77. Progress in understanding wetting transitions on rough surfaces10.1016/j.cis.2014.02.009 ↗
78. Nearly perfect durable superhydrophobic surfaces fabricated by a simple one-step plasma treatment10.1038/s41598-017-02108-1 ↗
79. Spray-coating of superhydrophobic aluminum alloys with enhanced mechanical robustness10.1016/j.jcis.2014.02.024 ↗