journal article·2020-12

Stereometric and fractal analysis of sputtered Ag-Cu thin films

Ştefan Ţălu, Robert Saraiva Matos, Erveton Pinheiro Pinto, Sahar Rezaee, Mohsen Mardani

Publisher page

Abstract

Abstract In this paper, we have successfully deposited Ag-Cu thin films. Nanoscale morphology and nanotexture were studied using atomic force microscopy (AFM) through fractal and stereometric parameters. Additional algorithms have been developed to study new fractal parameters such as surface entropy, fractal succolarity, and fractal lacunarity. The results revealed that as the deposition time increased, films exposed isotropies between ~65 and 82%, which were correlated to the fractal patterns, where from #3 to #5 there were greater spatial complexities. Moreover, surface roughness increased from #1 to #3, which was observed for both Sq and Sa. Similar behavior was exhibited by the other height parameters. The height distribution asymmetry decreased from #1 to #4, unlike the flattening coefficient, which exhibited a random pattern. Other stereometric parameters revealed that #3 has the most uniform and homogeneous nanotexture. This was confirmed by the fractal lacunarity because for this deposition time the lacunarity coefficient was lower. Furthermore, all films exhibited excellent topographic uniformity and percolation, showing that the deposition time does not significantly affect surface porosity. Therefore, these results revealed that the morphology and texture of thin films can be controlled by the deposition time. In addition, the evaluated parameters showed that it is possible to determine the deposition time that presents a film with better topographic conditions for technological applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Roughness and Optical Measurements · Adhesion, Friction, and Surface Interactions · Laser-induced spectroscopy and plasma

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Microstructure, morphology and electrochemical properties of Co nanoflake water oxidation electrocatalyst at micro- and nanoscale10.1039/C6RA28795F ↗
2. Synthesis of multiwalled carbon nanotubes on Cu-Fe nano-catalyst substrate10.1016/j.rinp.2017.09.040 ↗
3. Titanium vanadium nitride electrode for micro-supercapacitors10.1016/j.elecom.2017.02.011 ↗
4. Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors10.1016/j.jmst.2017.11.048 ↗
5. Magnetoresistance of Cu–Ni nanoparticles in hydrogenated amorphous carbon thin films10.1007/s10854-015-2965-8 ↗
6. Preparation and magnetoresistance behavior of nickel nanoparticles embedded in hydrogenated carbon film10.1007/s10854-015-3294-7 ↗
7. and magnetically guided antiproliferative activity studies of drug-loaded superparamagnetic nanovectors10.1063/1.4919825 ↗
8. Synthesis and characterization of porous CaCO3 micro/nano-particles10.1140/epjp/i2017-11531-8 ↗
9. Microstructure and optical bandgap of cobalt selenide nanofilms10.1134/S1063782619130074 ↗
10. Synthesis of SPR nanosensor using gold nanoparticles and its application to copper (II) determination10.1007/s12633-017-9608-z ↗
11. Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films10.1088/2053-1591/ab26be ↗
12. Improving the corrosion resistance of ni/ss thin films by nitrogen ion implantation10.12693/APhysPolA.136.536 ↗
13. Characterization of the ion beam current density of the rf ion source with flat and convex extraction systems10.1007/s12633-018-9815-2 ↗
14. Synthesis of Ag-Cu alloy nanoparticles for lead-free interconnect materials
15. Structure-activity relationship of the radical scavenging activities of some natural antioxidants based on the graph of atomic orbitals10.1016/j.molstruc.2019.04.103 ↗
16. and antibacterial properties of silver-based hybrid nanostructures biosynthesized using extracts of coriander leaves and seeds10.2147/IJN.S105166 ↗
17. Synthesis of antibacterial silver-based nanodisks and dendritic structures mediated by royal jelly10.1039/C3RA45680C ↗
18. A solventless mix–bake–wash approach to the facile controlled synthesis of core–shell and alloy Ag–Cu bimetallic nanoparticles10.1039/C5CE00670H ↗
19. Advances of Ag, Cu, and Ag–Cu alloy nanoparticles synthesized via chemical reduction route10.1007/s11051-013-1537-1 ↗
20. Electrodeposited chrome/silver nanoparticle (Cr/AgNPs) composite coatings: characterization and antibacterial activity10.1016/j.jallcom.2017.03.226 ↗
21. Application of Mie theory and fractal models to determine the optical and surface roughness of Ag–Cu thin films10.1007/s11082-017-1079-3 ↗
22. Synthesis of Ag-Cu-Pd alloy thin films by DC-magnetron sputtering: case study on microstructures and optical properties10.1016/j.rinp.2018.04.029 ↗
23. Equilibrium Cu-Ag nanoalloy structure formation revealed by in situ scanning transmission electron microscopy heating experiments10.1063/1.4866052 ↗
24. The effects of deposition time on surface morphology, structural, electrical and optical properties of sputtered Ag-Cu thin films10.1140/epjp/i2016-16381-2 ↗
25. Structural, optical and thermal properties of silver colloidal nanoparticles10.1051/epjap/2012110310 ↗
26. Synthesis of Ag and Au nanoparticles embedded in carbon film: Optical, crystalline and topography analysis10.1016/j.rinp.2017.12.033 ↗
27. Micro and nanoscale characterization of three dimensional surfaces
28. Micromorphological characterization of zinc/silver particle composite coatings10.1002/jemt.22588 ↗
29. Evolution of rough surface geometry and crystalline structures of aligned TiO2 nanotubes for photoelectrochemical water splitting10.1038/s41598-018-29247-3 ↗
30. 3-D surface stereometry studies of sputtered TiN thin films obtained at different substrate temperatures10.1007/s10854-016-5774-9 ↗
31. Surface morphology of titanium nitride thin films synthesized by DC reactive magnetron sputtering
32. Morphological features in aluminum nitride epilayers prepared by magnetron sputtering
33. Fractal features of carbon–nickel composite thin films10.1002/jemt.22779 ↗
34. Micromorphology characterization of copper thin films by AFM and fractal analysis10.1007/s10854-015-3628-5 ↗
35. Film thickness effect on fractality of tin-doped In2O3 thin films10.1007/s13391-015-4280-1 ↗
36. Multifractal characteristics of titanium nitride thin films
37. Multifractal characterization of water soluble copper phthalocyanine based films surfaces10.1007/s13391-013-3270-4 ↗
38. Multifractal analysis of sputtered indium tin oxide thin film surfaces10.1016/j.apsusc.2019.04.170 ↗
39. Influence of scanning rate on quality of AFM image: Study of surface statistical metrics10.1002/jemt.22945 ↗
40. Study of the microstructure and surface morphology of silver nanolayers obtained by ion-beam deposition10.1007/s10854-017-7410-8 ↗
41. Influence of the oxygen partial pressure on the growth and optical properties of RF-sputtered anatase TiO2 thin films10.1016/j.rinp.2017.08.018 ↗
42. 2012
43. Mountains Map® 8 premium Software (Digital Surf, Besançon, France). Available from:http://www.digitalsurf.fr(Accessed 6 August 2020).
44. Stereometric characterization of kefir microbial films associated with Maytenus rigida extract10.1002/jemt.23532 ↗
45. The areal field parameters
46. Blateyron · 2013
47. 3D surface parameters (ISO 25178-2): actual meaning of Spk and its relationship to Vmp10.1016/j.precisioneng.2014.10.011 ↗
48. Advanced fractal analysis of nanoscale topography of Ag/DLC composite synthesized by RF-PECVD10.1080/02670844.2019.1710937 ↗
49. Evaluation of the nanoscale surface applied to biodegradable nanoparticles containing Allium sativum essential oil10.1016/j.matlet.2020.128111 ↗
50. Advanced micromorphology study of microbial films grown on Kefir loaded with Açaí extract10.1016/j.micron.2020.102912 ↗
51. Harrison · 1995
52. Advances in manufacturing analysis: fractal theory in modern manufacturing
53. Defining a method to calculate this fractal measure
54. A Fractal's Lacunarity, and how it can be Tuned and Measured
55. Superficial characterization of Kefir biofilms associated with Açaí and Cupuaçu Extracts10.1007/s13369-017-3024-y ↗
56. Changes of surface topography during wear for surfaces with different height distributions10.1080/10402000008982404 ↗
57. Nanoscale patterns in carbon – nickel nanocomposite thin films investigated by AFM and stereometric analysis