Understanding and controlling the key phase transformation for selective extracting Ni and Cu from Cr-containing electroplating sludge
Source abstract
Abstract
Abstract Electroplating sludge containing abundant toxic heavy metals is a metal mine. However, selective separation of Ni and Cu from Cr-containing electroplating sludge is a huge challenge for the recovery of electroplating sludge resource. Herein, we proposed a chlorination phase transformation and water leaching method for selectively extracting Ni and Cu. Metal hydroxides were converted into chlorides by chlorination, and the dissociation of the agglomerate released heavy metals. Under the regulation of temperature, CrCl3 converted into Cr2O3 while Ni and Cu still existed in chlorides. Finally, soluble NiCl2 and CuCl2 were recovered by water leaching. Under the optimal conditions (T = 350 °C, L/S = 1.2, t = 0.5 h), 96.3% of Ni and 90.7% of Cu were extracted. And water leaching is more moderate and environmentally friendly than acid leaching. The simulated natural aging test showed that the residue could stay safe and stable for a year. This work would provide a new idea for the selective extraction of heavy metals from hazardous solid wastes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Environmental remediation with nanomaterials · Adsorption and biosorption for pollutant removal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Application of dry composite electroplating sludge into preparation of cement-based decorative mortar as green pigment10.1016/j.jclepro.2013.11.002 ↗
2. Ferrite materials prepared from two industrial wastes: electroplating sludge and spent pickle liquor10.1016/j.seppur.2010.07.009 ↗
3. Environmental risk assessment of pyrometallurgical residues derived from electroplating and pickling sludges10.1016/j.jclepro.2017.12.285 ↗
4. Toxicity assessment of untreated/treated electroplating sludge using human and plant bioassay10.1080/10934529.2018.1462911 ↗
5. Separation and extraction of valuable metals from electroplating sludge by carbothermal reduction and low-carbon reduction refining10.1007/s11837-019-03880-3 ↗
6. Selective separation of chromium from sulphuric acid leaching solutions of mixed electroplating sludge using phosphate precipitation10.1016/j.hydromet.2019.03.013 ↗
7. Leaching of non-ferrous metals from galvanic sludges10.4028/www.scientific.net/MSF.946.591 ↗
8. Leaching behaviour of a galvanic sludge in sulphuric acid and ammoniacal media10.1016/j.jhazmat.2005.02.008 ↗
9. Highly selective copper and nickel separation and recovery from electroplating sludge in light industry10.15244/pjoes/28353 ↗
10. Enhanced bioleaching of Cr and Ni from a chromium-rich electroplating sludge using the filtrated culture of Aspergillus niger10.1016/j.jclepro.2020.121622 ↗
11. Screening bioleaching systems and operational conditions for optimal Ni recovery from dry electroplating sludge and exploration of the leaching mechanisms involved10.1080/01490451.2015.1068888 ↗
12. Cleaner utilization of electroplating sludge by bioleaching with a moderately thermophilic consortium: a pilot study10.1016/j.chemosphere.2019.05.185 ↗
13. Electrochemical copper recovery from galvanic sludge10.1016/j.hydromet.2016.06.028 ↗
14. Sustainable electrochemical recovery of high-purity Cu powders from multi-metal acid solution by a centrifuge electrode10.1016/j.jclepro.2018.09.020 ↗
15. Separation and recovery of Copper (II), Nickel (II) from simulated plating wastewater by solvent extraction using Lix98410.4028/www.scientific.net/AMR.365.252 ↗
16. Solvent extraction applied to the recovery of heavy metals from galvanic sludge10.1016/j.jhazmat.2004.12.008 ↗
17. Integrated diffusion dialysis precipitation – cementation for selective recovery of leaching chemicals and metal values from electroplating sludge10.1016/j.hydromet.2018.02.011 ↗
18. A novel process for recovering valuable metals from waste nickel-cadmium batteries10.1021/es901659n ↗
19. Separating and recovering Pb from copper-rich particles of crushed waste printed circuit boards by evaporation and condensation10.1021/es200243f ↗
20. Characterization of sulfide film on smithsonite surface during sulfidation processing and its response to flotation performance10.1016/j.powtec.2019.04.023 ↗
21. Selective flotation of smithsonite, quartz and calcite using alkyl diamine ether as collector10.1016/S1003-6326(18)64649-7 ↗
22. An emission-free vacuum chlorinating process for simultaneous sulfur fixation and lead recovery from spent lead-acid batteries10.1021/acs.est.7b05283 ↗
23. An efficient rough vacuum-chlorinated separation method for the recovery of indium from waste liquid crystal display panels10.1039/c2gc36241d ↗
24. An integrated and environmental-friendly technology for recovering valuable materials from waste tantalum capacitors10.1016/j.jclepro.2017.08.043 ↗
25. Heavy metal removal from sewage sludge under citric acid and electroosmotic leaching processes10.1016/j.seppur.2020.116822 ↗
26. Removal of metal ions from aqueous solutions by sorption onto untreated low-rank coal (oxihumolite)10.1016/j.seppur.2006.08.004 ↗
27. Management strategies and valorization for waste sludge from active treatment of extremely metal-polluted acid mine drainage: a contribution for sustainable mining10.1016/j.jclepro.2016.09.181 ↗
28. Metal release and speciation changes during wet aging of coal fly ashes10.1021/es302807b ↗
29. A novel route to synthesize MOFs-derived mesoporous dawsonite and application in elimination of Cu(II) from wastewater10.1016/j.cej.2019.123174 ↗
30. Dual-functional mesh with Zn-Ni-Co LDHs@NiMoO4 heterojunction nanoarrays for highly efficient oil/water separation and photocatalytic degradation
31. Cr(VI) removal by magnetic carbon nanocomposites derived from cellulose at different carbonization temperatures10.1039/C5TA01227A ↗
32. An efficient and sulfur resistant K-modified activated carbon for SCR denitrification compared with acid- and Cu-modified activated carbon10.1016/j.cej.2020.125047 ↗
33. Extraction kinetics of heavy metal-containing sludge10.1016/j.jhazmat.2005.03.035 ↗
34. Application of chloride metallurgy and corona electrostatic separation for recycling waste multilayer ceramic capacitors10.1021/acssuschemeng.7b02190 ↗
35. Method for recycling tantalum from waste tantalum capacitors by chloride metallurgy10.1021/acssuschemeng.6b01839 ↗
36. Effective Extraction of Cr(VI) from Hazardous Gypsum Sludge viaControlling the Phase Transformation and Chromium Species10.1021/acs.est.8b02213 ↗