Zn based hydroxyapatite based coatings deposited on a novel FeMoTaTiZr high entropy alloy used for bone implants
Source abstract
Abstract
Abstract In this paper, a novel biocompatible alloy defined as FeMoTaTiZr was obtained and functionalized by hydroxyapatite-based coatings (HAP) in order to increase their biocompatibility, bioactivity, and resistance to corrosion for to be used as bone implants. To obtain the surface with antibacterial properties, the HAP coatings were doped with small amount of Zn. The alloy was prepared using the VAR (Vacuum Arc Remelting) equipment, while the coatings by RF magnetron sputtering method. The EDS analysis confirmed the presence of Ca and P in the case of all developed coatings, having Ca/P ratio ranged from 1.69 (undoped HAP) to 1.96 (Zn doped HAP). The (Ca+Zn)/P ration was of about 2.15 for the Zn doped HAP coatings. The XRD and ATR-FTIR investigations confirmed the presence of calcium phosphate phases. After coating with HAP, the roughness of uncoated substrates increased with 1.4 times, and it was considerably increased by the Zn addition with 2.4 times. The electrochemical tests showed that the un-doped HAP exhibited good corrosion behavior, while Zn doped HAP coatings have a high dissolution rate in fetal bovine serum, being more proper as a biodegradable material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. High-Entropy Alloys – A New Era of Exploitation10.4028/www.scientific.net/MSF.560.1 ↗
2. Critical Assessment 14: high entropy alloys and their development as structural materials10.1179/1743284714Y.0000000749 ↗
3. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review
5. Virtual Testing of Composite Structures Made of High Entropy Alloys and Steel10.3390/met7110496 ↗
6. Mg-Ca-Zn bio-degradable light alloys produced in a levitation induction melting furnace10.3233/JAE-209113 ↗
7. Metals and implants
8. Ultrahard bulk nanocrystalline VNbMoTaW high-entropy alloy10.1016/j.jallcom.2018.07.331 ↗
9. Preparation and characterization of Ti-15Mo alloy used as biomaterial10.1590/S1516-14392011005000013 ↗
10. Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial10.1302/0301-620X.81B5.0810907 ↗
11. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2016.10.028 ↗
12. Nomura · 2015 · 215
13. Zirconium Alloys for Orthopaedic and Dental Applications10.1002/adem.201800207 ↗
14. Time-Constant Dispersion
15. Osteoporosis and biomaterial osteointegration10.1016/j.biopha.2004.08.016 ↗
16. Biocompatibility and anti-microbiological activity characterization of novel coatings for dental implants: a primer for non-biologists10.3389/fmats.2016.00040 ↗
17. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
18. Biomaterials in total joint replacement10.1016/j.colsurfb.2003.12.002 ↗
19. J. Wilson, Metallic biomaterials, 2018. doi:10.1016/B978-0-08-102205-4.00001-5.10.1016/B978-0-08-102205-4.00001-5 ↗
20. Metallic biomaterials: current challenges and opportunities10.3390/ma10080884 ↗
21. Metallic biomaterials, Fundam
22. Engineering biocompatible implant surfaces. Part I: materials and surfaces10.1016/j.pmatsci.2012.09.001 ↗
23. Metal release from stainless steel, Co-Cr-Mo-Ni-Fe and Ni-Ti alloys in vascular implants10.1016/j.corsci.2008.09.002 ↗
24. Development and characterization of metal oxide nanoparticles for the delivery of anticancer drug, Artif
25. Biological functionality of extracellular matrix-ornamented three-dimensional printed hydroxyapatite scaffolds10.1002/jbm.a.35664 ↗
26. Three-dimensional chitosan-nanohydroxyapatite composite scaffolds for bone tissue engineering
27. Preparation of Zn doped mesoporous silica nanoparticles (Zn-MSNs) for the improvement of mechanical and antibacterial properties of dental resin composites10.1016/j.dental.2020.03.026 ↗
28. Zn-Doped CaP-Based Coatings on Ti–6Al–4 V and Ti–6Al–7Nb Alloys Prepared by Magnetron Sputtering: controllable Biodegradation, Bacteriostatic, and Osteogenic Activities10.3390/coatings11070809 ↗
29. Preparation and in vitro antibacterial properties of anodic coatings co-doped with Cu, Zn, and P on a Ti–6Al–4V alloy10.1016/j.matchemphys.2019.122360 ↗
30. What are Trace Elements? —Their deficiency and excess states—
31. Sputtered Si and Mg doped hydroxyapatite for biomedical applications10.1088/1748-605X/aa9718 ↗
32. Effect of the deposition temperature on corrosion resistance and biocompatibility of the hydroxyapatite coatings10.1016/j.apsusc.2015.05.059 ↗
33. In vitro evaluation of Ag doped hydroxyapatite coatings in acellular media10.1016/j.ceramint.2019.02.191 ↗
34. Influence of thermal treatment on the roughness, corrosion resistance and wettability of hydroxyapatite films deposited by RF magnetron sputtering10.4028/www.scientific.net/KEM.587.297 ↗
35. Design, fabrication and characterization of TiO2-SiO2 multilayer with tailored color glazing for thermal solar collectors10.1016/j.matdes.2017.05.063 ↗
36. High Entropy Alloys – Manufacturing Route
37. Apatite coatings from ostrich eggshell and its bioactivity assessment10.4028/www.scientific.net/KEM.720.185 ↗
38. Synthesis and antibacterial property of zinc loaded hydroxyapatite nanorods10.1016/j.matlet.2012.08.115 ↗
39. R.Z. LeGeros, Calcium phosphates in oral Biology and Medicine, New York, 1991. doi:10.1159/isbn.978-3-318-04021-0.
40. Dense hydroxyapatite
41. Formation and structure of zinc-substituted calcium hydroxyapatite10.1016/j.materresbull.2004.10.020 ↗
42. Synthesis and characterization of Zn-Doped hydroxyapatite: scaffold application, antibacterial and bioactivity studies10.1016/j.heliyon.2019.e01716 ↗
43. Cytotoxicity evaluation of 63S bioactive glass and bone-derived hydroxyapatite particles using human bone-marrow stem cells10.5507/bp.2011.028 ↗
44. Strontium-substituted hydroxyapatite coatings deposited via a co-deposition sputter technique10.1016/j.msec.2014.10.046 ↗
45. Effect of thermal treatment on the surface morphology and wettability of hydroxyapatite films deposited by rf magnetron sputtering
46. Comparative study of the hydroxyapatite coatings prepared with/without substrate bias10.1016/j.ceramint.2017.08.016 ↗
47. Hydroxyapatite surfaces functionalized with a self-assembling peptide: XPS, rairs and nexafs study10.3390/nano10061151 ↗
48. Infrared spectroscopic characterization of carbonated apatite: a combined experimental and computational study10.1002/jbm.a.34720 ↗
49. Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy10.1023/A:1018570213546 ↗
50. Co-doping of hydroxyapatite with zinc and fluoride improves mechanical and biological properties of hydroxyapatite10.1016/j.pnsc.2014.06.004 ↗
51. Animal trial on zinc doped hydroxyapatite: a case study10.1016/j.jascer.2014.01.005 ↗
52. Cutting behavior of Al0.6CoCrFeNi High Entropy Alloy10.3390/ma13184181 ↗
53. N.P. Lang, J. Lindhe, Clinical Periodontology and Implant Dentistry, 2 Volume Set, 6th Edition, 2015.
54. Structure, corrosion resistance, mechanical and tribological properties of ZrB2 and Zr-B-N coatings10.3390/met11081194 ↗
55. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs10.1002/jbm.820250708 ↗
56. Anchorage of TiO2-blasted, HA-coated, and machined implants: an experimental study with rabbits10.1002/jbm.820291009 ↗
57. Interface between bone tissue and implants of solid hydroxyapatite or hydroxyapatite-coated titanium implants10.1016/0142-9612(89)90044-6 ↗
58. Understanding and controlling the bone-implant interface10.1016/S0142-9612(99)00160-X ↗
59. Electrochemical behavior of austenitic stainless steels exposed to acetic acid solution10.20964/2020.02.13 ↗
60. Mechanical and corrosion resistance of a new nanostructured Ti-Zr-Ta-Nb alloy10.1016/j.jmbbm.2011.05.012 ↗
61. Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition10.1016/j.apsusc.2009.02.086 ↗
62. Corrosion of high entropy alloys10.1038/s41529-017-0009-y ↗
63. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel10.1016/j.msea.2006.12.049 ↗
64. Selection of extraction medium influences cytotoxicity of zinc and its alloys10.1016/j.actbio.2019.03.013 ↗
65. Evaluation of in vitro corrosion behavior of zinc–hydroxyapatite and zinc–hydroxyapatite–iron as biodegradable composites10.1002/jbm.b.34712 ↗
66. Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. Mechanically polished samples10.1002/jbm.10329 ↗