journal article·2021-08

PES/PVC textile surface modification by thermo-chemical treatment for improving its hydrophilicity

Valentina Krylova, Nijolė Dukštienė, Martynas Lelis, Simona Tučkutė

Publisher page

Abstract

Abstract Thermo-chemical treatment makes possible rapid and simple hydrophilic surface preparation, regardless of the type and properties of the material whose surface is to be modified. In this work, the mechanical roughened surface of polyvinylchloride coated polyester fabric (PES/PVC) textile was treated with alkaline and oxidative-acidic solutions at a 65 °C temperature. The induced surface modifications of PES/PVC textile after thermo-chemical pre-treatment were analysed by water contact angle measurements, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), X-ray photoelectron spectroscopy (XPS), Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD) analyses were used. Hydrophilic surfaces were obtained when the pre-treatment time was 1.25–1.5 h. XRD analysis confirms that there are no phase changes after PES/PVC textile mechanical roughening and thermo-chemical treatments. Elemental composition analysis by EDS technique reveals that applied surface treatment methods mostly affects carbonaceous compounds as carbon concentration is reduced by approximately 17 % and 14 % for thermo-oxidative acidic and thermo-alkaline treated PES/PVC samples, respectively. ATR-FTIR as well as XPS confirms the grafting of polar groups like C−OH, C−O, −COOH and –OH group's on PES/PVC surface. This indicates that used thermo-oxidative acidic solution destroyed or at least broke down to some extent the covalent bonds of the main carbon skeletons, which were present on PES/PVC substrate surfaces and improved surface wettability of thermo-oxidative acidic treated samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Microplastics and Plastic Pollution · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Synthesis and properties of polyamide–Ag2S composite based solar energy absorber surfaces10.1016/j.apsusc.2013.06.009 ↗
2. Ag2S deposited on oxidized polypropylene as composite material for solar light absorption10.1016/j.apsusc.2014.02.014 ↗
3. Critical role of nanoinclusions in silver selenide nanocomposites as a promising room temperature thermoelectric material10.1039/C9TC00163H ↗
4. Fabrication of zinc oxide nanoneedles on conductive textile for harvesting piezoelectric potential10.1016/j.cplett.2014.08.009 ↗
5. A sustainable approach for scalable production of α-Fe2O3 nanocrystals with 3D interconnected porous architectures on flexible carbon textiles as integrated electrodes for lithium-ion batteries10.1016/j.jpowsour.2018.08.057 ↗
6. Hierarchically porous nickel oxide nanoflake arrays grown on carbon cloth by chemical bath deposition as superior flexible electrode for supercapacitors10.1016/j.matlet.2014.08.037 ↗
7. Chemical bath deposition of nanocrystalline (111) textured Ag2Se thin films10.1016/S0167-577X(99)00272-4 ↗
8. Ag-In-Se films on flexible architectural textiles as efficient material for optoelectronics applications: a preliminary study10.1016/j.tsf.2021.138566 ↗
9. Structural membranes used in modern building facades10.1016/j.proeng.2016.08.007 ↗
10. Reinforced plastics to starch: plastics, resins, rubbers, fibers
11. Vieweg · 1973
12. Ullmann's Encyklopädie der Technischen Chemie
13. Mechanical properties of polyvinylchloride-coated fabrics processed with Precontraint® technology10.1177/0731684412459898 ↗
14. Fast surface hydrophilization via atmospheric pressure plasma polymerization for biological and technical applications10.3390/polym11101613 ↗
15. Study on the surface properties of wood/polyethylene composites treated under plasma10.1016/j.apsusc.2010.08.032 ↗
16. Surface modification of polymers: methods and applications
17. Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
18. Effect of UV–ozone treatment on electrical properties of PEDOT:PSS film10.1016/j.orgel.2010.11.009 ↗
19. Degradation of polymer blends: a brief review10.1016/j.polymdegradstab.2017.07.011 ↗
20. Studies on modification of polyester fabrics I: Alkaline hydrolysis10.1002/app.1987.070330215 ↗
21. Effects of alkaline treatment on the mechanical and rheological properties of low-density polyethylene/spartium junceumflour composites
22. Alkaline hydrolysis: A facile method to manufacture superhydrophobic polyester fabric by fluorocarbon coating10.1016/j.porgcoat.2011.07.006 ↗
23. Tuning surface properties of poly(butylene terephthalate) melt blown fibers by alkaline hydrolysis and fluorination10.1021/am502398u ↗
24. The improvement of adhesive properties of PEEK through different pre-treatments10.1016/j.apsusc.2012.04.040 ↗
25. Functional groups docking on PVDF membranes: novel piranha approach10.1016/j.eurpolymj.2017.09.029 ↗
26. Nanocomposite of polystyrene foil grafted with metallaboranes for antimicrobial activity10.1016/j.apsusc.2018.01.235 ↗
27. Effect of halloysite nanotubes on multifunctional properties of coaxially electrospun poly(ethylene glycol)/polyamide-6 nanofibrous thermal energy storage materials10.1016/j.tca.2020.178673 ↗
28. Introduction, modification, and characterization of functional groups on the surface of low-density polyethylene film10.1021/ja00456a035 ↗
29. Study of thermo-oxidative chemical pre-treatment of isotactic polypropylene10.1007/s10973-014-4226-0 ↗
30. Surface treatment of polymer microfibrillar structures for improved surface wettability and adhesion10.1016/j.apsusc.2013.11.048 ↗
31. Polymer surface modification for the attachment of bioactive compounds10.1016/j.progpolymsci.2007.04.002 ↗
32. Evolution in the surface modification of textiles: a review10.1080/00405167.2018.1533659 ↗
33. Catalyzation of alkaline hydrolysis of polyester by oxidizing agents for surface modification
34. The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites10.1016/j.compositesb.2014.08.025 ↗
35. The effect of alkali treatment on properties of dopamine modification of bamboo fiber/polylactic acid composites10.3390/polym10040403 ↗
36. Contact angles on hydrophobic solid surfaces and their interpretation10.1016/0021-9797(92)90127-8 ↗
37. Wetting behavior of water and oil droplets in three-phase interfaces for hydrophobicity/philicity and oleophobicity/philicity10.1021/la901906h ↗
38. Mechanically durable, superomniphobic coatings prepared by layer-by-layer technique for self-cleaning and anti-smudge10.1016/j.jcis.2015.06.030 ↗
39. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
40. Mittal · 1991
41. NIST X-ray Photoelectron Spectroscopy Database, NIST Standard Reference Database 20, Version 4.1, (n.d.). 2020.
42. A review on C1s XPS-spectra for some kinds of carbon materials10.1080/1536383X.2020.1794851 ↗
43. Hydrophobicity, hydrophilicity and silanes
44. Definitions for hydrophilicity, hydrophobicity, and superhydrophobicity: getting the basics right10.1021/jz402762h ↗
45. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
46. Hydrophilic and superhydrophilic surfaces and materials10.1039/c1sm05849e ↗
47. Facile fabrication of porous and hydrophilic polystyrene membranes using recycled waste10.4028/www.scientific.net/MSF.1008.39 ↗
48. Plasma surface modification of polymers for biomedical use10.1016/S0168-583X(03)00650-5 ↗
49. Surface characterization of plasma-modified poly(ethylene terephthalate) film surfaces10.1002/polb.20234 ↗
50. McKeen · 2020 · 93
51. X-ray diffraction studies for identification of polyethylene terephthalate fibres
52. PET depolimerization in supercritical ethanol conditions catalysed by nanoparticles of metal oxides10.1016/j.supflu.2019.104715 ↗
53. Characterisation of PET nonwoven deposited with Ag/FC nanocomposite films10.1080/02670844.2017.1382063 ↗
54. X-ray diffraction and differential scanning calorimetry of BaTiO3/polyvinyl chloride nanocomposites10.7439/ijasr.v1i10.2745 ↗
55. Hot-pressed wet-laid polyethylene terephthalate nonwoven as support for separation membranes10.3390/polym11101547 ↗
56. Enhancement of optical and electrical properties of PVC/PMMA blend films doped with Li4Ti5O12 nanoparticles10.1016/j.jmrt.2019.11.019 ↗
57. The study of nickel effect on the hydrothermal dechlorination of PVC10.1016/j.jclepro.2017.03.101 ↗
58. Characterization of oxygen and argon ion flux interaction with PET surfaces by in-situ XPS and ex-situ FTIR10.1016/j.polymdegradstab.2010.05.003 ↗
59. Fabrication of magnetized polyester fabric grafted with β-cyclodextrin for controlled release of menthol10.1177/1528083716662586 ↗
60. Fourier-transform infrared study of conformational changes in plasticized poly(vinyl chloride)10.1002/pol.1983.180211104 ↗
61. Infrared spectroscopy: a potential quality assurance method for composite bonding surface preparation
62. Pathways for degradation of plastic polymers floating in the marine environment10.1039/C5EM00207A ↗
63. Investigation of hydrolysis in poly(ethylene terephthalate) by FTIR-ATR10.1007/s10118-014-1372-6 ↗
64. Dechlorination behaviour of flexible poly(vinyl chloride) in NaOH/EG solution10.1016/j.polymdegradstab.2008.07.009 ↗
65. Dechlorination of poly(vinylidene chloride) in NaOH/ethylene glycol as a function of NaOH concentration, temperature, and solvent10.1016/j.polymdegradstab.2008.06.008 ↗
66. Understanding the pyrolysis mechanism of polyvinylchloride (PVC) by characterizing the chars produced in a wire-mesh reactor10.1016/j.fuel.2015.11.034 ↗
67. Fatty acid esters-based composite phase change materials for thermal energy storage in buildings10.1016/j.applthermaleng.2011.11.017 ↗
68. Badertscher · 2009
69. Hybrid selective surface hydrophilization and froth flotation separation of hazardous chlorinated plastics from E-waste with novel nanoscale metallic calcium composite10.1016/j.jhazmat.2015.11.054 ↗
70. Sustainable and selective separation of PVC and ABS from a WEEE plastic mixture using microwave and/or mild-heat treatment with froth flotation10.1021/acs.est.6b02280 ↗
71. Development of hydrophobicity and selective separation of hazardous chlorinated plastics by mild heat treatment after PAC coating and froth flotation10.1016/j.jhazmat.2016.09.014 ↗
72. Degradation profile of polyethylene after artificial accelerated weathering10.1016/S0141-3910(02)00338-5 ↗
73. Degradation assessment of LDPE multilayer films used as a greenhouse cover: natural and artificial aging impacts10.1002/app.34928 ↗
74. Degradation of thermomechanical performance and lifetime estimation of multilayer greenhouse polyethylene films under simulated climatic conditions10.1002/pen.23895 ↗
75. Analysis of degradation mechanism of plasticized PVC under artificial aging conditions10.1016/j.polymdegradstab.2006.11.003 ↗