journal article·2022-02

Formation of dense nanostructures on femtosecond laser-processed silicon carbide surfaces

Jiangyou Long, Ziyu He, Deyi Ou, Yajun Huang, Pengchao Wang, Qinglei Ren, Xiaozhu Xie

Publisher page

Abstract

Abstract Femtosecond (fs) laser has been proved to be a reliable tool for high-quality micromachining on silicon carbide (SiC) surfaces. In this work, we studied the formation of dense nanostructures on fs laser-processed SiC surfaces. These nanostructures are composed of lots of amorphous silicon dioxide (SiO2) nanoparticles with diameters ranging from 5 nm to 30 nm. The distribution and morphology of the formed nanostructures are primarily affected by the laser pulse energy, the laser scanning velocity, and the laser repetition rate. Under specific parameters, the width of the nanostructure area is more than five times wider than the width of the prepared microgrooves. We also observe the expansion of plasma plumes produced upon single-pulse laser ablation by a microscopic imaging system equipped with an intensified charge-coupled device (ICCD) camera to explain the formation mechanisms. We propose that the dense nanostructures are formed due to the high-temperature decomposition, assembling, and oxidation of the laser ablation products. The effective accumulation of laser-ablated products above the laser-irradiated areas is the key to their formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Laser-induced spectroscopy and plasma · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Silicon carbide as a new MEMS technology10.1016/S0924-4247(99)00335-0 ↗
2. High-temperature single-crystal 3C-SiC capacitive pressure sensor10.1109/JSEN.2004.830301 ↗
3. Simulation, fabrication and testing of bulk micromachined 6h-SiC high-g piezoresistive accelerometers10.1016/S0924-4247(02)00436-3 ↗
4. Silicon carbide benefits and advantages for power electronics circuits and systems10.1109/JPROC.2002.1021562 ↗
5. Role of wide bandgap materials in power electronics for smart grids applications
6. SiC materials and processing technology
7. Femtosecond laser three-dimensional micro-and nanofabrication10.1063/1.4904320 ↗
8. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
9. Application of femtosecond laser micromachining in silicon carbide deep etching for fabricating sensitive diaphragm of high temperature pressure sensor10.1016/j.sna.2020.112017 ↗
10. Femtosecond-pulsed laser micromachining of a 4H-SiC wafer for MEMS pressure sensor diaphragms and via holes10.1088/0960-1317/18/3/035022 ↗
11. Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped flat-top focus spots10.1016/j.ceramint.2021.05.027 ↗
12. SiOx nanodandelion by laser ablation for anode of lithium-ion battery10.1002/smll.201502539 ↗
13. Large-scale hierarchical oxide nanostructures for high-performance electrocatalytic water splitting10.1016/j.nanoen.2017.03.049 ↗
14. Glass surface micromachining with simultaneous nanomaterial deposition by picosecond laser for wettability control10.1016/j.apsusc.2021.149050 ↗
15. Hybrid micro/nano-structure formation by angular laser texturing of Si surface for surface enhanced Raman scattering10.1364/OE.24.010352 ↗
16. Selenium nanoparticle prepared by femtosecond laser-induced plasma shock wave10.1364/OE.381898 ↗
17. General strategy toward dual-scale-controlled metallic micro-nano hybrid structures with ultralow reflectance10.1021/acsnano.7b03673 ↗
18. Formation mechanism of hierarchical Micro- and nanostructures on copper induced by low-cost nanosecond lasers10.1016/j.apsusc.2018.09.055 ↗
19. Superhydrophobic surfaces fabricated by femtosecond laser with tunable water adhesion: from lotus leaf to rose petal10.1021/acsami.5b01870 ↗
20. Morphological changes in ultrafast laser ablation plumes with varying spot size10.1364/OE.23.015608 ↗
21. Dynamics of ultrafast laser plasma expansion in the presence of an ambient10.1063/1.4829487 ↗
22. Characterization of laser ablation of solid targets with near-infrared laser pulses of 100 fs and 1 ps duration10.1016/j.apsusc.2005.06.045 ↗
23. Two-dimensional imaging of atomic and nanoparticle components in copper plasma plume produced by ultrafast laser ablation10.1007/s00339-014-8266-x ↗
24. Pressure and temperature dependence of the laser-induced plasma plume dynamics10.1063/1.4971251 ↗
25. Molecular-dynamics study of ablation of solids under femtosecond laser pulses
26. Dynamics of the plume formation and parameters of the ejected clusters in short-pulse laser ablation10.1007/s00339-002-1818-5 ↗
27. High-pressure, high-temperature behavior of silicon carbide: a review10.3390/cryst8050217 ↗
28. Laser-induced phase separation of silicon carbide10.1038/ncomms13562 ↗
29. Spatial and temporal distribution of metal atoms and their diatomic oxide molecules in femtosecond laser-induced plasmas10.1039/C8JA00150B ↗
30. Nanoparticle generation in ultrafast pulsed laser ablation of nickel