journal article·2011-09

Dynamic modeling and control of a bending combined roller system using Timoshenko beam theory and constrained model predictive control

Chung-Feng Jeffrey Kuo, Huy Quang Vu

Textile Research Journal· Volume 81· Issue 14
Publisher page

Abstract

The roller system is an essential and very important part of a lot of fabric processing machines in the textile industry. This study proposes a new bending roller control system (BRCS) to control bending deformation and vibration of the roller system. First, a new mathematical model of a combined roller is obtained by using an eigenfunction expansion method and Timoshenko beam theory. The combined roller consists of inner steel and outer nylon layers to take full advantage and eliminate drawbacks of materials. Second, a hydraulic multi-cylinder system is put inside the roller at the suitable position. This solution not only increases significantly the power of the bending actuation system but also reduces the transient time of dynamic response and avoids damaging outside surfaces of the rollers. Finally, in order to improve dynamic response performance and open wide operating range of system, model predictive control (MPC) and constrained control are applied to the BRCS. Simulation results proved that the proposed control system is completely effective and reliable.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration and Dynamic Analysis · Textile materials and evaluations · Iterative Learning Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Institute of Automation & Control, National Taiwan University of Science and Technology, Taiwan, R. O. C.,

Graduate Institute of Automation & Control, National Taiwan University of Science and Technology, Taiwan, R. O. C.

References (22)

Show source-provided references
1. 10.1016/0141-1195(90)90004-P10.1016/0141-1195(90)90004-P ↗
2. 10.1007/s12221-008-0097-y10.1007/s12221-008-0097-y ↗
3. 10.1007/BF0287587510.1007/BF02875875 ↗
4. 10.1177/004051750607417210.1177/0040517506074172 ↗
5. 10.1177/004051750707416110.1177/0040517507074161 ↗
6. 10.1006/jsvi.1999.225710.1006/jsvi.1999.2257 ↗
7. 10.1016/0165-2125(94)00045-710.1016/0165-2125(94)00045-7 ↗
8. 10.1016/j.finel.2008.01.01010.1016/j.finel.2008.01.010 ↗
9. 10.1016/j.ijmecsci.2006.05.00210.1016/j.ijmecsci.2006.05.002 ↗
10. Karnovsky OA · 2004
11. 10.1115/1.142111210.1115/1.1421112 ↗
12. 10.1201/978142002009010.1201/9781420020090 ↗
13. 10.1016/S0045-7949(03)00211-610.1016/S0045-7949(03)00211-6 ↗
14. 10.1016/j.ijmecsci.2009.06.00410.1016/j.ijmecsci.2009.06.004 ↗
15. Wang L. · 2009
16. 10.1016/j.jprocont.2009.02.00310.1016/j.jprocont.2009.02.003 ↗
17. 10.1049/iet-cta.2008.035810.1049/iet-cta.2008.0358 ↗
18. Maciejowski JM · 2002
19. 10.1007/b13814510.1007/b138145 ↗
20. Wills AG · IEEE Trans · 2008 · 16 · 3
21. Petersen JAM · IEEE Trans · 2006 · 14 · 91
22. 10.1017/CBO978051180444110.1017/CBO9780511804441 ↗