journal article·2014-05

Design, function, and applications of high-retention doffer and worker wire

Kenneth Ross Atkinson

Textile Research Journal· Volume 84· Issue 8
Publisher page

Abstract

The transfer of fiber from higher-speed rollers, licker-ins, breasts, or swifts, covered with forward-facing teeth, to relatively lower-speed doffers and workers with backward-facing teeth, is analyzed using the mechanics and geometry of the process. The analysis shows that the front angle of the doffer and worker teeth is too large to prevent fibers from slipping off as a result of the pull from the teeth of the swift. The capacity of the doffer and worker teeth to retain fiber is enhanced by cutting steps parallel to the base into the front edge of the tooth, effectively lowering the front angle of the tooth to zero degrees. Teeth with extremely low front angles support fibers until they are perpendicular to the doffer or worker, maximizing retention and transfer. Carding trials on worsted and non-woven cards in a pilot plant reveal benefits attributable to the new wire design. A survey of commercial non-woven processors using the high-efficiency wire on doffers and workers also identified various benefits.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Material Properties and Processing · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Retired Independent Scholar, Australia

References (27)

Show source-provided references
1. 10.1080/0040500870865825010.1080/00405008708658250 ↗
2. Dehghani A · Autex Res J · 1999 · 1 · 7810.1515/aut-2000-010204 ↗
3. 10.1177/00405175940640060910.1177/004051759406400609 ↗
4. Lawrence CA · Autex Res J · 1999 · 1 · 6410.1515/aut-2000-010203 ↗
5. 10.1177/00405175820520030310.1177/004051758205200303 ↗
6. 10.1080/1944702620865988410.1080/19447026208659884 ↗
7. 10.1177/00405175990690020310.1177/004051759906900203 ↗
8. 10.4188/transjtmsj.25.12_T9710.4188/transjtmsj.25.12_T97 ↗
9. Harrowfield BV and Gravolin D. The measurement of transfer efficiency from the swift to the workers and to the doffer in worsted carding. In: VIIth international wool textile research conference , Vol II, Tokyo, 1985, pp.292–301.
10. Lee MEM. Mathematical models of the carding process . Ph D Thesis, University of Oxford, St John's College, 2001.
11. 10.1007/s10665-005-9029-710.1007/s10665-005-9029-7 ↗
12. 10.1533/joti.2001.001210.1533/joti.2001.0012 ↗
13. Carding Solutions for Non Woven Cards, http://www.bekaert.com/∼/media/Files/Download%20Files/Equipment/Textile%20machinery%20-%20Carding%20Solutions/Carding%20for%20non-woven%20application_2010.pdf (accessed 5 February 2014).
14. Card Clothings for Roller Cards - Nonwoven, http://www.graf-companies.com/products/cardclothingsforrollercards-1/?eID=dam_frontend_push&docID=431 (accessed 5 February 2014).
15. Verbeke P. Garniture de carde . Patent 2,821,863, France, 8 March 2001.
16. Graf RA. Sawtooth wire . Patent 6,523,226 B2, USA, 25 February 2003.
17. Maerz J. Saw-tooth clothing for rollers and/or cylinders of flat cards or roller cards . Patent 7,818,848 B2, USA, 26 October 2010.
18. Atkinson KR. A new generation of doffer and worker wire. In: Textile Institute 81st world conference , Melbourne, 2000.
19. Atkinson KR. Card wire, especially for doffers and workers . Patent 6,408,487 B1, USA, 25 June 2002.
20. Peries L. SiroLock® doffer and worker wire for nonwoven cards, http://www.bekaert.com/∼/media/Files/Download%20Files/Equipment/Textile%20machinery%20-%20Carding%20Solutions/Nonwoven%20card%20clothing%20-%20SiroLock%20-%20Leaflet.pdf (accessed 5 February 2014).
21. 10.1080/0040500910865923010.1080/00405009108659230 ↗
22. 10.1177/00405175680380051210.1177/004051756803800512 ↗
23. 10.1080/0040500860865851710.1080/00405008608658517 ↗
24. 10.1177/004051750935880410.1177/0040517509358804 ↗
25. 10.1007/978-0-387-21544-010.1007/978-0-387-21544-0 ↗
26. 10.1177/004051750934060110.1177/0040517509340601 ↗
27. 10.1016/j.engfracmech.2009.10.00310.1016/j.engfracmech.2009.10.003 ↗