journal article·2016-06

Response of fiber diameter to a continuously changing draw ratio in a laser drawing process

Munekazu Matoba, Yutaka Ohkoshi, Kyoung Hou Kim, Toshifumi Ikaga

Textile Research Journal· Volume 86· Issue 10
Publisher page

Abstract

The controllability of the fiber diameter profile with a changing draw ratio in a laser drawing process is discussed in comparison with model calculations. The take-up speed in the continuous drawing process was changed under constant acceleration, and the diameter profile of the resultant fiber was monitored on-line. It was revealed that the diameter profile was consistent with a profile predicted by a model calculation up to a certain acceleration. The profile was calculated by assuming a stationary neck-drawing point and elastic deformation of the fiber in the drawing system. Video observation revealed that the neck-drawing point did in fact move with changes in the draw ratio. Moreover, it moved faster at higher accelerations, particularly when the draw ratio was increased from low to high. It seems that the faster movement of the neck-drawing point causes the observed diameter change to lag behind that predicted by the model. The responsiveness of the diameter change could be further improved by shortening the distance between the feed and take-up rollers. The minimum response length was 5 cm as the draw ratio decreased from 8.0 to 4.0.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Optical measurement and interference techniques · Laser Material Processing Techniques · Industrial Vision Systems and Defect Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Textile Science and Technology, Shinshu University, Ueda, Japan

Division of Frontier Fibers, Institute for Fiber Engineering, Shinshu University, Ueda, Japan

References (18)

Show source-provided references
1. Matsumoto M · 2004 · 278
2. Isoda H and Yasuda H. Synthetic yarn having thickness and thinness and its preparation. Patent S59-157310, Japan, 1984.
3. Ohwa Y, Ikaga T and Ohkoshi Y. Periodic diameter-changing fiber produced by the drawing with intermittently laser irradiation. In: Proceedings of 11 th Asian textile conference , Daegue, Korea, 1–4 November 2011, paper no. 1PS-054p.128. The Korean Fiber Society.
4. 10.2115/fiber.63.17210.2115/fiber.63.172 ↗
5. 10.1016/0032-3861(94)90540-110.1016/0032-3861(94)90540-1 ↗
6. 10.1016/S0032-3861(01)00625-510.1016/S0032-3861(01)00625-5 ↗
7. 10.2115/fiber.38.2_T4910.2115/fiber.38.2_T49 ↗
8. 10.2115/fiber.40.6_T19310.2115/fiber.40.6_T193 ↗
9. 10.2115/fiber.41.T810.2115/fiber.41.T8 ↗
10. 10.3139/217.226610.3139/217.2266 ↗
11. Kazama K, Ito H and Kikutani T. Fiber structure development in melt spinning process with periodic modulation of take-up velocity. In: Abstracts of international conference on advanced polymers and processing , Yonezawa, Japan, 2001, p.94. Japan Society of Polymer Processing.
12. Ito H, Yamagata S and Kikutani T. Formation of PET fibers with controlled diameter variation utilizing drawing process equipped with a vibrator. In: Proceedings of the Polymer Processing Society 20th annual meeting , Akron, IL, June 2004, p.79. Polymer Processing Society.
13. 10.2115/fiber.70.16710.2115/fiber.70.167 ↗
14. Matoba M, Itoh A, Ikaga T, et al. Method and apparatus for producing fiber having diameter gradient. Patent 2013-224505, Japan, 2013.
15. 10.2115/fiber.64.18110.2115/fiber.64.181 ↗
16. Ohkoshi Y, Wada S, Endo M, et al. Device and method manufacturing plastic optical transmission body. Patent 2010-282132, Japan, 2010.
17. 10.3139/217.168410.3139/217.1684 ↗
18. 10.1002/app.147510.1002/app.1475 ↗