Comparison of silicone and spin-on glass packaging materials for light-emitting diode encapsulation
Source abstract
Abstract
Abstract Traditional white light light-emitting diode (LED) encapsulation is performed by mixed phosphors and silicone coating on LED die. However, this encapsulation with silicone coating incurs overheated temperatures and yellowing problem. Therefore, this work attempts to replace silicone paste by using spin-on-glass (SOG) materials. Experimental results indicate that although initial brightness of SOG-based packaging is lower than that of silicone packaging, its light attenuation is significantly lower than that of silicone for a long lighting time. After the LED power is turned on for 12 h, the brightness of LED with silicone and SOG material packaging decreases from 84 to 48 lm and 73 to 59 lm, respectively. Therefore, SOG material provides an alternative packaging solution for high power LED lighting applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Luminescence Properties of Advanced Materials · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Fabrication and thermal analysis of flip-chip light-emitting diodes with different numbers of Au stub bumps10.1016/j.microrel.2010.01.036 ↗
2. Heat sink performances of GaN/InGaN flip-chip light-emitting diodes fabricated on silicon and AlN submounts10.1016/j.microrel.2011.04.013 ↗
3. Light output improvement of InGaN-based light-emitting diodes by microchannel structure10.1109/LPT.2007.901591 ↗
4. Electrostatic reliability characteristics of GaN flip-chip power light-emitting diodes with metal–oxide–silicon submount10.1109/TED.2009.2033774 ↗
5. Advances in phosphors for light-emitting diodes10.1021/jz2002452 ↗
6. Chromaticity stability of phosphor-converted white light-emitting diodes with an optical filter10.1364/AO.50.000177 ↗
7. Study on the effect of the relative position of the phosphor layer in the LED package on the high power LED lifetime10.1002/pssc.200983493 ↗
8. Effect of the phosphor geometry on the luminous flux of phosphor-converted light-emitting diodes10.1109/LPT.2010.2085080 ↗
9. Studies of phosphor concentration and thickness for phosphor-based white light-emitting-diodes10.1109/JLT.2008.917087 ↗
10. High thermal stability of phosphor-converted white light-emitting diodes employing Ce:YAG-doped glass10.1109/JSTQE.2010.2096459 ↗
11. Ultra-high thermal-stable glass phosphor layer for phosphor-converted white light-emitting diodes10.1109/JDT.2012.2229258 ↗
12. LED Wafer Level Packaging with a Remote Phosphor Cap
13. Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup10.1143/JJAP.44.L649 ↗
14. Lochner · 1990
15. Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design10.1016/j.jmatprotec.2004.12.003 ↗
16. Die casting process optimization using Taguchi methods10.1016/S0924-0136(02)01036-1 ↗
17. Hydrothermal processing of hydroxyapatite nanoparticles—a Taguchi experimental design approach10.1016/j.jcrysgro.2012.09.010 ↗
18. High temperature synthesis of SAPO-34: applying an L9 Taguchi orthogonal design to investigate the effects of experimental parameters10.1016/j.powtec.2011.10.030 ↗
19. Characteristics of Glass Phosphor with Ce3+:YAG Particle Coated SiO2 by Sol–Gel Method
20. Color temperature tunable white light emitting diodes packaged with an omni-directional reflector10.1364/OE.17.021408 ↗
21. Optical performance as a function of phosphor particle number in white LED10.1117/12.861036 ↗
22. Optical analysis of color distribution in white LEDs with various packaging methods10.1109/LPT.2008.2005998 ↗
23. Development of a flip glass substrate LED package technology for color bin yield and view angle enhancement