article·2016-09-09

Thin indium tin oxide nanoparticle films as hole transport layer in inverted organic solar cells

Tina Wahl, Sabrina Zellmer, Jonas Hanisch, Georg Garnweitner, Erik Ahlswede

Publisher page

Abstract

Abstract Indium tin oxide nanoparticles (ITO-NPs) were used as hole transport layer (HTL) in doctor-bladed inverted bulk-heterojunction organic solar cells. After the non-aqueous synthesis of ITO nanoparticles, a customized stabilization strategy was established. As result, ethylenediamine, a stabilizer with a low boiling point was used for an easy removal of the remaining organic compounds in the ITO-NP layer by a short annealing step at 120 °C. Furthermore, different post-processing treatments (thermal annealing and plasma treatment) on the ITO-NP layer were investigated to improve the electrical parameters of the solar cell. Using poly(3-hexylthiophen) as photoactive polymer, power conversion efficiencies of 3% were achieved with the incorporation of ITO-NPs as HTL, being almost as good as the efficiencies of the reference system where poly(3,4-ethylenedioxythiophene) was used as HTL.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.