Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting
Source abstract
Abstract
Abstract Ti6Al4V parts with near-full 98.3% density, significantly refined microstructures and attendant obviously improved mechanical strength were fabricated by SLM additive manufacturing. The cellular prior β grains were formed on XY plane. However, the columnar morphology of prior β grains were formed on the XZ and YZ planes, which showed an epitaxial growth along the building direction through successive deposited layers. All the planes displayed the fine acicular α′ martensites formed due to the significantly rapid cooling rate of melt pool. The reason for forming the intersection angular of 40°-50° between acicular α′ and β boundaries was clarified. The improved tensile strength of 1261 MPa and good ductility with elongation of 10.2% were simultaneous obtained for SLM-processed Ti6Al4V part. The present work provides a fundamental understanding of rapid manufacturing of high-strength and light-weight structural materials by laser additive manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Nanoindentation study of Ti6Al4V alloy nitrided by low intensity plasma jet process10.1016/S0042-207X(02)00231-2 ↗
2. Influence of titanium concentration on mechanical properties and wear resistance to Ti6Al4V of Ti-C: H on cemented carbide10.1016/j.vacuum.2017.01.010 ↗
3. The future of metal10.1126/science.1185866 ↗
4. Microstructure and mechanical properties of in situ casting TiC/Ti6Al4V composites through adding multi-walled carbon nanotubes10.1016/j.jallcom.2015.03.044 ↗
5. Selective laser melting commercially pure Ti under vacuum10.1016/j.vacuum.2013.02.003 ↗
6. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
7. Tribological behavior of Ti6Al4V cellular structures produced by selective laser melting10.1016/j.jmbbm.2017.01.004 ↗
8. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
9. Microstructure and mechanical properties of additive manufactured copper alloy10.1016/j.matlet.2016.05.064 ↗
10. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
11. Effect of vapor grown carbon fiber content on microstructure and tensile properties of Ti64/TiC composite fabricated by powder metallurgy method10.1177/0021998315620849 ↗
12. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium10.1016/j.msea.2013.11.038 ↗
13. Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V10.1016/j.matchar.2008.07.006 ↗
14. The formation mechanism of TiC reinforcement and improved tensile strength in additive manufactured Ti matrix nanocomposite10.1016/j.vacuum.2017.05.029 ↗
15. On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field10.1016/j.msec.2016.09.011 ↗
16. Microstructure evolution and density behavior of CP Ti parts elaborated by self-developed vacuum selective laser melting system10.1016/j.apsusc.2013.04.090 ↗
17. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder10.1016/j.msea.2013.06.055 ↗