Optimization of mechanical and tribological properties of FCC CrCoNi multi-principal element alloy with Mo addition
Source abstract
Abstract
Abstract A new multi-principal element alloy system, CrCoNiMox, is designed by adding Mo in FCC CrCoNi alloy to improve the strength and wear resistance. The addition of Mo causes severe lattice distortion of the alloys and promotes the formation of intermetallic phases. With the increase of Mo content, the hardness and compressive yield strength of the CrCoNiMox alloys increase obviously from 244 HV and 518 MPa to 656 HV and 1973 MPa, respectively, whereas the plasticity decreases because the intermetallic compounds are hard but brittle. As a result of the competition between the solid solution strengthening of Mo and the embrittlement of the intermetallic compounds, the fracture toughness of the alloys firstly increases and then decreases with increasing Mo content. The wear resistance of the alloys is significantly increased with the Mo content and shows a slight increase when x exceeds 0.5, because the wear mechanism of the alloys is changed from abrasive wear to adhesive wear and brittle fracture gradually. This study provides a new insight for the design of high strength and wear resistant alloys for engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Accelerated exploration of multi-principal element alloys with solid solution phases10.1038/ncomms7529 ↗
3. Gao · 2016
4. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
5. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
6. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
7. Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
8. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
9. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
10. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
11. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
12. Enhanced mechanical properties of a CoCrFeNi high entropy alloy by supercooling method10.1016/j.matdes.2016.01.112 ↗
13. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
14. Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy10.1016/j.jallcom.2013.11.146 ↗
15. Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys10.1016/j.msea.2010.07.028 ↗
16. Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys10.1016/j.jallcom.2013.03.253 ↗
17. Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys10.1016/j.matchar.2012.05.005 ↗
18. Age-hardening of the CoCrFeNiMo0.85 high-entropy alloy10.1016/j.matchar.2013.04.012 ↗
19. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
20. Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy10.1016/j.jallcom.2013.11.146 ↗
21. Rapid preparation of AlCoCrFeNi high entropy alloy by spark plasma sintering from elemental powder mixture10.1016/j.matlet.2016.06.014 ↗
22. Enhanced mechanical properties of NbCr2 Laves phase by spark plasma sintering10.1016/j.vacuum.2016.05.029 ↗
23. Consolidation/synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
24. Microstructure and mechanical properties of an Fe-20Mn-11Al-1.8C-5Cr alloy prepared by powder metallurgy10.1016/j.vacuum.2016.12.039 ↗
25. Classification of bulk metallic glasses by atomic size difference, heat of mixing and Period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
26. Powder metallurgy processing of a WxTaTiVCr high-entropy alloy and its derivative alloys for fusion material applications10.1038/s41598-017-02168-3 ↗
27. Comparison of WeCu composite coatings fabricated by atmospheric and vacuum plasma spray processes10.1016/j.vacuum.2015.04.015 ↗
28. The failure of brittle porous solids under compressive stress states10.1016/0001-6160(86)90087-8 ↗
29. Microstructural and mechanical characterization of Nb-based in situ composites from Nb-Si-Ti ternary system10.1016/j.actamat.2007.08.012 ↗
30. Principles of abrasive wear10.1016/0043-1648(74)90102-1 ↗
31. Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite10.1016/j.matdes.2016.11.072 ↗