journal article·2019-09

Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al magnesium alloy

Marjan Razzaghi, Hamed Mirzadeh, Massoud Emamy

Vacuum· Volume 167
Publisher page

Abstract

Abstract The effects of zinc addition and hot working via extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al-xZn (x = 0, 0.5, 1, 2, and 5 wt%) magnesium alloys were studied. It was revealed that the simultaneous addition of 2 wt% Al and 0.5 wt% Zn (known as AZ20 alloy) is an effective way for refining of α-Mg in the as-cast condition, which resulted in a significant enhancement of tensile properties and changing the fracture mechanism from brittle cleavage facets to fibrous appearance characterized by ductile dimples. Further addition of Zn had negligible effect on the grain size but resulted in the appearance of Mg21(Zn,Al)17 intermetallic known as φ-phase, where the latter resulted in the deterioration of tensile properties of as-cast ingot due to its unfavorable morphology. After extrusion process, fine and recrystallized microstructures were observed along with the fractured and dispersed second phase particles. Besides the effect of fine grain size as verified by the Hall-Petch relationship, the presence of finely dispersed particles in the ZA52 (Mg–5Zn–2Al) alloy was found to be favorable in improving the mechanical properties and tensile toughness of the extruded alloy. Based on these findings, it was recommended to use these alloys in the wrought condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Constitutive behavior of AZ80 M magnesium alloy compressed at elevated temperature and containing a small fraction of liquid10.1016/j.vacuum.2018.06.053 ↗
2. Significant improvement in the strength of Mg-Al-Zn-Ca-Mn extruded alloy by tailoring the initial microstructure10.1016/j.vacuum.2019.01.016 ↗
3. Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy10.1016/j.matdes.2013.01.023 ↗
4. Effects of alloying composition on the microstructures and mechanical properties of Mg-Al-Zn-Ca-RE magnesium alloy10.1016/j.vacuum.2018.10.072 ↗
5. The effect of precipitation hardening on the structure and mechanical and tribological properties of magnesium alloy WE5410.1016/j.vacuum.2017.02.015 ↗
6. Effect of zinc and mischmetal on microstructure and mechanical properties of Mg-Al-Mn alloy10.1016/S1002-0721(09)60203-9 ↗
7. A new intermetallic phase formation in Mg-Si-Ni magnesium-based in-situ formed alloys10.1016/j.vacuum.2019.03.050 ↗
8. Fabrication of extraordinary high-strength magnesium alloy by hot extrusion10.1016/j.scriptamat.2009.06.003 ↗
9. Effect of various SPD techniques on structure and superplastic deformation of two phase MgLiAl alloy10.1007/s12540-018-0118-3 ↗
10. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
11. Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation10.1016/j.mechmat.2014.07.004 ↗
12. A comparative study on the hot flow stress of Mg-Al-Zn magnesium alloys using a simple physically-based approach10.1016/j.jma.2014.09.003 ↗
13. Effect of Al content on microstructure and mechanical properties of as-cast Mg-5Nd alloys10.1016/j.jallcom.2017.11.143 ↗
14. Recent advances in grain refinement of light metals and alloys10.1016/j.cossms.2015.10.001 ↗
15. Current research progress in grain refinement of cast magnesium alloys: a review article10.1016/j.jallcom.2014.09.061 ↗
16. Native grain refinement of magnesium alloys10.1016/j.scriptamat.2005.06.010 ↗
17. Study on the mutual effect of La and Gd on microstructure and mechanical properties of Mg-Al-Zn extruded alloy10.1016/j.jallcom.2016.07.037 ↗
18. Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys10.1016/j.jallcom.2016.11.100 ↗
19. Magnesium biomaterials for orthopedic application: a review from a biological perspective10.1002/jbm.b.33113 ↗
20. Comparison of the machinability and wear properties of magnesium alloys10.1007/s00170-014-6256-y ↗
21. The crystal structure of the equilibrium Φ phase in Mg–Zn–Al casting alloys10.1016/S1359-6454(01)00162-8 ↗
22. Phase equilibria of Mg-rich corner in Mg–Zn–Al ternary system at 300° C10.1016/S1003-6326(11)61166-7 ↗
23. Effect of composition on the microstructure and mechanical properties of Mg–Zn–Al alloys10.1016/j.msea.2006.11.089 ↗
24. Lanthanum effect on improving CTE, damping, hardness and tensile response of Mg-3Al alloy10.1016/j.jallcom.2016.11.400 ↗
25. Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy10.1016/j.jallcom.2018.12.262 ↗
26. Effect of extrusion temperature on the microstructure and mechanical properties of low Zn containing wrought Mg alloy micro-alloying with Mn and La-rich misch metal10.1016/j.msea.2018.10.068 ↗
27. Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α+ β regime10.1016/j.vacuum.2018.08.020 ↗
28. Hot deformation behavior of a Sr-modified Al-Si-Mg alloy: constitutive model and processing maps10.1016/S1003-6326(18)64692-8 ↗
29. Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates10.1016/j.matdes.2018.05.022 ↗
30. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation10.1016/j.matdes.2013.12.072 ↗
31. Microstructure, tensile properties and creep behaviors of as-cast Mg–2Al–1Zn–xGd (x= 1, 2, 3, and 4 wt.%) alloys10.1016/j.jallcom.2012.01.084 ↗
32. Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy10.1016/j.actamat.2009.10.056 ↗
33. Development of new die-castable Mg-Zn-Al-Ca-RE alloys for high temperature applications10.2320/matertrans.44.562 ↗
34. Achievements in magnesium alloy research10.4028/www.scientific.net/MSF.828-829.3 ↗
35. Yang · 2013
36. Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels10.1016/j.msea.2015.03.104 ↗
37. Dieter · 1988
38. Mechanical properties of a hot deformed Al-Mg2Si in-situ composite10.1016/j.msea.2018.04.064 ↗
39. The influences of Sr on the microstructure and mechanical properties of Mg-5Zn-2Al alloy10.1016/j.msea.2016.06.033 ↗
40. The effects of yttrium element on microstructure and mechanical properties of Mg–5 wt.% Zn–2 wt.% Al alloy10.1016/j.msea.2005.04.011 ↗
41. Effects of Nd on the microstructure of ZA52 alloy10.1016/j.msea.2004.09.010 ↗
42. Research on dynamic precipitation behavior of pre-solution treated Mg–5 wt.% Zn–2 wt.% Al (–2 wt.% Y) alloy during creep10.1016/j.msea.2006.02.021 ↗
43. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
44. Al-Mg-Zn (aluminium - magnesium - zinc)
45. 60 years of Hall-Petch: past to present nano-scale connections10.2320/matertrans.MA201302 ↗
46. Hall-Petch relationship in Mg alloys: a review10.1016/j.jmst.2017.07.022 ↗
47. Texture and weak grain size dependence in friction stir processed Mg–Al–Zn alloy10.1016/j.scriptamat.2006.06.005 ↗
48. Effects of grain size, texture and twinning on mechanical properties and work-hardening behavior of AZ31 magnesium alloys10.1016/j.msea.2011.07.076 ↗
49. Mechanical properties and press formability at room temperature of AZ31 Mg alloy processed by single roller drive rolling10.2320/matertrans.43.2554 ↗
50. Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling10.1016/j.actamat.2006.05.018 ↗
51. Meyers · 2009
52. Toward unraveling the effects of intermetallic compounds on the microstructure and mechanical properties of Mg–Gd–Al–Zn magnesium alloys in the as-cast, homogenized, and extruded conditions10.1016/j.msea.2016.10.084 ↗