The effect of Cu concentration in the photovoltaic efficiency of CIGS solar cells prepared by co-evaporation technique
Source abstract
Abstract
Abstract Structural and electrical properties of polycrystalline CIGS thin films have been studied by changing the Cu/(In + Ga) ratio in the films. CIGS thin films with various Cu/(In + Ga) ratios are grown over Mo-coated soda-lime glass substrates using a co-evaporation technique. The Raman spectra provide information about the existence of the order defect compound (ODC) at Cu-poor compositions (Cu/(In + Ga) ratio oc ) also enhances with an increment of Cu/(In + Ga) ratios from 410 to 540 mV. Finally, the experimental results reveal an optimum Cu/(In + Ga) ratio of 0.85 where the solar cell shows the highest efficiency of 10.3% with J sc , V oc and FF of 28.0 mA cm −2 , 520 mV and 0.706, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Characterization and device performance of (Ag,Cu)(In,Ga)Se2 absorber layers
2. High voltage Cu(In,Ga)S2 solar modules10.1016/j.tsf.2011.01.096 ↗
3. Estimation of open-circuit voltage of Cu(In,Ga)Se2 solar cells before cell fabrication10.1016/j.renene.2014.11.073 ↗
4. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
5. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
6. ZnO/Cds/Cu(In,Ga)Se2 thin film solar cells with improved performance
7. Electrical characterization of Cu(In,Ga)Se2 thin-film solar cells and the role of defects for the device performance10.1016/S0927-0248(00)00273-7 ↗
8. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
9. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
10. The structural evolution of Cu(In,Ga)Se2 thin film and device performance prepared through a three-stage process10.1016/j.mssp.2015.10.024 ↗
11. The role of Na incorporation in the low-temperature processed CIGS thin film solar cells using post deposition treatment10.1016/j.jallcom.2015.10.181 ↗
12. Effect of sodium doping on graded Cu(In1-xGax)Se2 thin films prepared by chemical spray pyrolysis10.1016/j.mssp.2015.01.002 ↗
13. Effect of sodium addition on Cu-deficient CuIn1-xGaxS2 thin film solar cells10.1016/j.solmat.2008.04.013 ↗
14. A study on composition, structure and optical properties of copper-poor CIGS thin film deposited by sequential sputtering of CuGa/In and In/(CuGa+In) precursors10.1016/j.jcrysgro.2012.08.013 ↗
15. Microstructural characterization of CIGS formation using different selenization processes10.1016/j.apsusc.2012.12.142 ↗
16. Texture manipulation of CuInSe2 thin films10.1016/S0040-6090(99)00778-6 ↗
17. Cu(In,Ga)Se2-based solar cells prepared from Se-containing precursors10.1016/j.vacuum.2013.10.007 ↗
18. Raman spectra of the ordered vacancy compounds CuIn3Se5 and CuGa3Se510.1063/1.121893 ↗
19. Raman spectra of ordered vacancy compounds in the Cu-In-Se system10.1143/JJAP.36.L1075 ↗
20. A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporation10.1002/adma.19930050209 ↗
21. High efficiency CuInxGa1−xSe2 solar cells made from (Inx,Ga1−x)2Se3 precursor films10.1063/1.112670 ↗
22. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
23. Direct observation of Na and O impurities at grain surfaces of CuInSe2 thin films10.1116/1.581583 ↗
24. On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M=Na, K,Cs) precursor layers
25. The effect of Na in polycrystalline and epitaxial single-crystal Cu(In1−x,Gax)Se210.1016/j.tsf.2004.11.038 ↗
26. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗
27. Microstructural properties of (In,Ga)2Se3 precursor layers for efficient CIGS thin film solar cells10.1016/j.solmat.2008.11.028 ↗
28. Incorporation of Cu in Cu(In,Ga)Se2-based thin film solar cells10.3938/jkps.57.1826 ↗
29. Phase identification and XPS studies of Cu(In,Ga)Se2 thin films10.1016/j.mejo.2008.01.071 ↗
30. Low-temperature growth of Na doped CIGS films on flexible polymer substrates by pulsed laser ablation from a Na containing target10.1016/j.surfcoat.2012.06.065 ↗
31. Crystal growth and photoelectrical properties of (Cux,Ag1-x)InSe2 and Cu(Iny,Ga1-y)Se2 solid solutions
32. Copper Indium Selenides and related materials for photovoltaic devices10.1080/20014091104215 ↗
33. Lai · 2011 · 44
34. Incorporation of Cu in Cu(In,Ga)Se2-based thin-film solar cells10.3938/jkps.57.1826 ↗
35. CuInS2 and CuGaS2 thin films grown by modulated flux deposition with various Cu contents10.1002/pssa.200622132 ↗
36. Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe210.1063/1.353020 ↗
37. Preparation of ordered vacancy chalcopyrite-type CuIn3Se5 thin films10.1143/JJAP.33.L1251 ↗
38. Deposition and doping of CdS/CdTe thin film solar cells10.1088/1674-4926/36/5/054001 ↗
39. Physical device modeling of CdTe ultrathin film solar cells10.1016/j.solener.2016.02.046 ↗
40. Crystalline quality and photovoltaic performance of InGaAs solar cells grown on GaAs substrate with large-misoriented angle10.1016/j.vacuum.2011.02.014 ↗