journal article·2017-07

Influence of Ti content on the microstructure and properties of graphite flake/Cu-Ti composites fabricated by vacuum hot pressing

Ren Zhang, Xinbo He, Zheng Chen, Xuanhui Qu

Vacuum· Volume 141
Publisher page

Abstract

Abstract Graphite flake/Cu-Ti composites were successfully fabricated via vacuum hot pressing. The effects of Ti addition on the microstructure, bending strength and thermal conductivity (TC) were investigated. The results indicate that TiC interfacial layer was formed between the matrix and graphite flake in Ti-added composites, and the interfacial layer thickness initially sustains distinct growth and then turns into a faint increase with the increasing Ti content. The bending strength is proportional to the Ti content, exhibiting 60% increase by adding 2.0 wt% Ti as against the unmodified one. The thermal conductivity initially increases and then decreases with rising Ti content, yielding a maximum value of 597 W m−1 K−1 with 1.0 wt% Ti added. The graphite flake/Cu-Ti composites with moderate Ti addition showing excellent properties can be a highly attractive candidate for electronic packaging materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Effect of interface evolution on thermal conductivity of vacuum hot pressed SiC/Al composites10.1002/adem.201400412 ↗
2. Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications10.1016/j.compositesa.2007.08.012 ↗
3. Spark plasma sintering of W–15Cu alloy from ultrafine composite powder prepared by spray drying and calcining-continuous reduction technology10.1016/j.matchar.2008.07.012 ↗
4. Low-temperature densification and excellent thermal properties of W–Cu thermal-management composites prepared from copper-coated tungsten powders10.1016/j.jallcom.2013.11.003 ↗
5. Comparison of W–Cu composite coatings fabricated by atmospheric and vacuum plasma spray processes10.1016/j.vacuum.2015.04.015 ↗
6. Thermal conductivity and thermal expansion coefficient of diamond/5wt%Si–Cu composite by vacuum hot pressing10.1016/j.fusengdes.2010.08.043 ↗
7. On the thermal conductivity of Cu–Zr/diamond composites10.1016/j.matdes.2012.09.006 ↗
8. Optimization of sintering parameters for diamond–copper composites in conventional sintering and their thermal conductivity10.1016/j.jallcom.2014.06.139 ↗
9. Diamond–tungsten based coating–copper composites with high thermal conductivity produced by Pulse Plasma Sintering10.1016/j.matdes.2015.03.056 ↗
10. The influence of minor titanium addition on thermal properties of diamond/copper composites via in situ reactive sintering10.1016/j.mssp.2014.09.050 ↗
11. High thermal conductivity through interfacial layer optimization in diamond particles dispersed Zr-alloyed Cu matrix composites10.1016/j.scriptamat.2015.07.022 ↗
12. Effect of chromium carbide coating on thermal properties of short graphite fiber/Al composites10.1007/s10853-014-8272-6 ↗
13. Effect of titanium carbide coating on the microstructure and thermal conductivity of short graphite fiber/copper composites10.1007/s10853-013-7373-y ↗
14. Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers10.1016/j.materresbull.2013.07.064 ↗
15. Preparation of graphite flakes/Al with preferred orientation and high thermal conductivity by squeeze casting10.1016/j.carbon.2015.08.063 ↗
16. The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites10.1016/j.physleta.2014.10.048 ↗
17. In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment10.1016/j.compositesb.2014.11.018 ↗
18. Thermal management material: graphite10.1002/adem.201300418 ↗
19. Nanoplatelet size to control the alignment and thermal conductivity in copper-graphite composites10.1021/nl501411g ↗
20. Thermophysical properties and microstructure of graphite flake/copper composites processed by electroless copper coating10.1016/j.jallcom.2013.09.207 ↗
21. The origin of high thermal conductivity and ultralow thermal expansion in copper-graphite composites10.1021/acs.nanolett.5b01664 ↗
22. Thermal conductivity and mechanical properties of a flake graphite/Cu composite with a silicon nano-layer on a graphite surface10.1039/C6RA17804A ↗
23. Mo2C intermediate layers for graphite–Cu system using the molten salt method10.1016/j.fusengdes.2011.07.007 ↗
24. Fabrication and thermo-physical properties of graphite flake/copper composites10.1177/0021998314562220 ↗
25. High thermal conductivity composite of diamond particles with tungsten coating in a copper matrix for heat sink application10.1016/j.applthermaleng.2012.04.063 ↗
26. Spark plasma sintering of titanium-coated diamond and copper–titanium powder to enhance thermal conductivity of diamond/copper composites10.1016/j.mssp.2015.01.041 ↗
27. Tungsten carbide coating on diamond particles in molten mixture of Na2CO3 and NaCl10.1016/j.diamond.2014.11.008 ↗
28. Thermal conductivity and mechanical properties of flake graphite/Al composite with a SiC nano-layer on graphite surface10.1016/j.matdes.2016.06.122 ↗
29. Preparation and thermal conductivity Of spark plasma sintered aluminum matrix composites reinforced with titanium-coated graphite fibers10.1002/adem.201400148 ↗
30. Chemical vapour deposition of Cr, Mo and W thin films induced by synchrotron radiation10.1016/0042-207X(95)00132-8 ↗
31. Structure and properties of TiC/Ti coatings fabricated on NiTi by plasma immersion ion implantation and deposition10.1016/j.vacuum.2012.05.023 ↗
32. Investigation on preparation and diffusion barrier properties of W–Ti thin films10.1016/j.vacuum.2010.12.012 ↗
33. High thermal conductive diamond/Cu–Ti composites fabricated by pressureless sintering technique10.1016/j.applthermaleng.2013.11.065 ↗
34. On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites10.1016/j.scriptamat.2007.08.007 ↗
35. Thermal conductivity of Cu–Zr/diamond composites produced by high temperature–high pressure method10.1016/j.compositesb.2014.08.023 ↗
36. Effect of carbide formers on microstructure and thermal conductivity of diamond-Cu composites for heat sink materials10.1016/S1003-6326(08)60422-7 ↗
37. Effective thermal conductivity of a misoriented short fiber composite10.1063/1.335924 ↗