journal article·2022-01

Thermal stabilization of nanocrystalline promoting conductive corrosion resistance of TiN–Ag films for metal bipolar plates

Fangyuan Yan, Bailing Jiang, Ziyu Wang, Jing Shi, Chao Yang, Dan Dong, Xu Wang

Vacuum· Volume 195
Publisher page

Abstract

Abstract An investigation on the corrosion protection and electrical conductivity films on metal bipolar plates can be achieved through magnetron sputtering. This work characterized the microstructures of TiN–Ag nanocomposite deposited at different temperatures with thermal stabilization. All the TiN–Ag films show adequate electrical conductivity with the interfacial contact resistance (ICR) of 4.81, 4.78, 4.52, 4.18 mΩ cm2 at the deposition temperature of 200 °C–350 °C on SS substrates, respectively, and corrosion resistance with the corrosion current density (Icorr) of 0.678, 0.526, 0.293, 0.596 μA cm−2. Additionally, the TiN–Ag film possesses the hydrophobic property with a static water contact angle of 106.7° at 350 °C. In summary, the TiN–Ag film on SS at 350 °C shows the potential application as metal bipolar plates of PEMFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · ZnO doping and properties · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Anticorrosion properties of TiN oxide coatings for carbonaceous bipolar plates of proton exchange membrane fuel cells10.1016/j.jpowsour.2013.10.065 ↗
2. Stacks with TiN/titanium as the bipolar plate for PEMFCs10.1016/j.energy.2012.10.020 ↗
3. Fabrication of titanium bipolar plates by rubber forming and performance of single cell using TiN-coated titanium bipolar plates10.1016/j.ijhydene.2014.03.013 ↗
4. Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells10.1016/j.energy.2017.05.086 ↗
5. Polymer electrolyte membrane fuel cell (PEMFC) flow field plate: design, materials and characterisation10.1002/fuce.201000033 ↗
6. Development of Ti bipolar plates with carbon/PTFE/TiN composites coating for PEMFCs10.1016/j.ijhydene.2018.09.046 ↗
7. A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: causes, consequences, and mitigation strategies10.1016/j.jpowsour.2012.01.059 ↗
8. Investigation on physical and electrochemical properties of TiN-coated Monel alloy used for bipolar plates of proton exchange membrane fuel cell10.1016/j.matchemphys.2019.121916 ↗
9. Soldering a gas diffusion layer to a stainless steel bipolar plate using metallic tin10.1016/j.ijhydene.2018.03.188 ↗
10. Decreasing contact resistance in proton-exchange membrane fuel cells with metal bipolar plates10.1016/j.jpowsour.2012.11.012 ↗
11. Ultrathin effective TiN protective films prepared by plasma-enhanced atomic layer deposition for high performance metallic bipolar plates of polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.146215 ↗
12. Enhanced electrical conductivity of two layers AlN–TiN coating on SS316L as bipolar plate using plasma focus device10.1016/j.ijhydene.2016.01.081 ↗
13. Bipolar plate materials for PEMFCs: a conductivity and stability study10.1016/j.jpowsour.2008.01.038 ↗
14. Carbon-coated stainless steel as PEMFC bipolar plate material10.1016/j.jpowsour.2007.08.096 ↗
15. Influence of Cr-C film composition on electrical and corrosion properties of 316L stainless steel as bipolar plates for PEMFCs10.1016/j.ijhydene.2015.10.047 ↗
16. Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti-6Al-4V bipolar plates for PEMFC10.1016/j.ijhydene.2020.02.152 ↗
17. Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti-6Al-4V bipolar plates for PEMFC10.1016/j.ijhydene.2020.02.152 ↗
18. Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments10.1016/S0010-938X(03)00187-2 ↗
19. Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells10.1016/j.jpowsour.2009.02.029 ↗
20. Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton membrane fuel cells10.1016/j.jpowsour.2019.226818 ↗
21. Fabrication and characterization of TiN-Ag nano-dice10.1016/j.micron.2008.11.004 ↗
22. High Si multilayered TiSiN/TiN(Ag) films with superior oxidation resistance10.1016/j.jmrt.2021.04.040 ↗
23. Photocatalytic performance of TiO2 nanotube structure based on TiN coating doped with Ag and Cu10.1016/j.ceramint.2020.11.078 ↗
24. TiN-Ag as an antimicrobial and wear resistant coating10.1016/j.biotri.2021.100192 ↗
25. Effect of cluster interface structure on the spontaneous escape behavior of silver in ion plating coatings and its inhibition mechanism10.1016/j.tsf.2018.08.027 ↗
26. The mixture of silver nanowires and nanosilver-coated copper micronflakes for electrically conductive adhesives to achieve high electrical conductivity with low percolation threshold10.1016/j.jallcom.2019.153184 ↗
27. Achieving high electrical conductivity and excellent electromagnetic interference shielding in poly(lactic acid)/silver nanocomposites by constructing large-area silver nanoplates in polymer matrix10.1016/j.compositesb.2019.05.003 ↗
28. Majorization of GLC properties by the introduction of silver nanowires as conductive framework for metal bipolar plates10.1016/j.apsusc.2020.147493 ↗
29. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
30. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
31. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
32. Electrical and piezoresistive properties of titanium oxycarbide thin films for high-temperature pressure sensors10.1016/j.vacuum.2021.110550 ↗
33. Activation energy and its fluctuations at grain boundaries of Er3+:BaTiO3perovskite thin films: effect of doping concentration and annealing temperature10.1016/j.vacuum.2021.110562 ↗
34. Effect of the sample work function on alkali metal dosing induced electronic structure change10.1016/j.elspec.2021.147045 ↗
35. The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy10.1038/s41598-021-90780-9 ↗
36. Sputtered chromium nitride films with finely tuned intra- and intercolumnar porosities as pseudocapacitive electrode for supercapacitors10.1016/j.surfcoat.2020.126535 ↗
37. Characterizing the structural degradation in a PEMFC cathode catalyst layer: carbon corrosion10.1149/1.3139963 ↗
38. Deposition of gold-titanium and gold-nickel coatings on electropolished 316L stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2009.12.036 ↗
39. Chromium interlayer amorphous carbon film for 304 stainless steel bipolar plate of proton exchange membrane fuel cell
40. Development and characterization of multilayered Cr-C/a-C:Cr film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.11.063 ↗
41. The study of Ni-based nano-crystalline and amorphous alloy coatings on AISI 304 stainless steel for PEM fuel cell bipolar plate application10.1016/j.ijhydene.2017.04.098 ↗
42. Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2018.10.218 ↗
43. Analysis of the surface energy interactions in the tribological behavior of AlCrN and TiAlN coatings10.1016/j.triboint.2020.106206 ↗
44. Synthesis of flexible silica aero gels using methyl trimethoxy silence (MTMS) pre-cursor10.1016/j.jcis.2006.03.044 ↗
45. Microstructure, mechanical and tribological properties of TiN-Ag films deposited by reactive magnetron sputtering10.1016/j.vacuum.2017.03.026 ↗
46. Microstructure and tribological properties of NbN-Ag composite films by reactive magnetron sputtering10.1016/j.apsusc.2015.07.114 ↗
47. Enhancing through-plane electrical conductivity by introducing Au microdots onto TiN coated metal bipolar plates of PEMFCs10.1016/j.ijhydene.2020.07.270 ↗
48. Evaluation of vacuum heat-treated a-C films for surface protection of metal bipolar plates used in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2021.04.132 ↗
49. Electric conductivity and corrosion resistance of amorphous carbon films prepared by direct current magnetron sputtering on 304 stainless steel
50. Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates10.1016/j.ijhydene.2014.12.085 ↗