journal article·2015-01

Effect of rare earth elements on sorption characteristics of nanostructured Zr–Co sintered porous getters

A. Heidary Moghadam, V. Dashtizad, A. Kaflou, H. Yoozbashizadeh

Vacuum· Volume 111
Publisher page

Abstract

Abstract This present work aims at investigating the effects of Ce, La and activation conditions on sorption characteristics of Zr–Co sintered porous getters. In order to study the effect of rare earth (RE) elements, cerium and lanthanum were added to the Zr–Co getters. Zirconium–cobalt rare earth getters were obtained using mechanical alloying process. The synthesis and activation process of the getter powder were studied by means of X-ray diffraction, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM) techniques. The results showed that after an optimum mechanical alloying time and activation process, nanostructured getter powder was achieved which led to improvement of the hydrogen sorption properties of the obtained getters. It was seen that the addition of Ce and La to the Zr–Co getters reduces the activation temperature and improve the sorption capacity of the getters. It was found that the room temperature pumping properties of the getters improved with activating temperature increasing from 280 to 330 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Aluminum Alloys Composites Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Chemical pumping in vacuum technology10.1016/0042-207X(95)00252-9 ↗
2. Preparation and pumping characteristics of Ti–7.5 wt.% Mo getter10.1016/j.jallcom.2009.06.011 ↗
3. Effects of Mo on the microstructure and hydrogen sorption properties of Ti–Mo getters10.1016/S1000-9361(07)60028-4 ↗
4. Preparation and hydrogen sorption performance of a modified Zr–C getter10.1016/j.vacuum.2007.10.008 ↗
5. SAES Getter. Technical report. St 707 none-evaporable Getters activatable at low temperatures.
6. Nitriding reactions with a Zr–Mn–Fe metal getter10.1016/S0925-8388(01)01499-2 ↗
7. SAES Getter. Technical report. CapaciTorr Pumps-MK5 Series.
8. Applications of non-evaporable getter pump in vacuum metrology10.1016/j.vacuum.2010.11.008 ↗
9. Nitrogen sorption tests, SEM-windowless EDS and XRD analysis of mechanically alloyed nanocrystalline getter materials10.1016/S0965-9773(99)00372-4 ↗
10. Activation of Zr–Co–rare earth getter films: an XPS study10.1016/j.apsusc.2010.04.006 ↗
11. Preparation and sorption characteristics of Zr–Co–RE getter films10.1016/j.jallcom.2012.01.030 ↗
12. Hydrogen-induced changes in crystal structure and magnetic properties of the Zr3MOx (M = Fe, Co) phases10.1016/j.jallcom.2004.05.064 ↗
13. The initial stages of the reaction between ZrCo and hydrogen studied by hot-stage microscopy10.1016/S0925-8388(97)00557-4 ↗
14. The improvement of the volume ratio measurement method in static expansion vacuum system10.1016/j.phpro.2012.03.591 ↗
15. Hydrogen sorption in zirconium and relevant surface phenomena10.2320/matertrans.48.1012 ↗
16. Detailed FT-IR spectroscopy characterization and thermal analysis of synthesis of barium titanate nanoscale particles through a newly developed process10.1016/j.vibspec.2013.02.001 ↗
17. Analysis and characterization of phase evolution of nanosized BaTiO3 powder synthesized through a chemically modified sol–gel process10.1007/s11661-012-1242-1 ↗