Outstanding features of high-speed hybrid laser-arc welding compared to high-speed laser welding of AA5059 aluminum alloys
Source abstract
Abstract
Abstract This study compares high-speed laser welding (HS-LW) and hybrid laser-arc welding (HS-HLAW) of AA5059. In both cases, the welding speed of 7 m/min promotes the least Mg evaporation and an over than 95% increase in strength comparing to the strength of the initial alloy. However, the porosity of the HS-HLAW welding joint is minimal (0.02%) and its grain size is finer than that of the HS-LW welding joint. The microhardness of the HS-HLAW is similar to that of the initial alloy, and HS-LW causes an increase in microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Laser beam welding of dissimilar aluminium alloys of 2000 and 7000 series: effect of post-welding thermal treatments on T joint strength10.1179/136217108X372559 ↗
2. Influence of filler wire and wire feed speed on metallurgical and mechanical properties of MIG welding–brazing of automotive galvanized steel/5754 aluminum alloy in a lap joint configuration
3. Influence of the local chemical composition on the mechanical properties of laser beam welded Al-Li alloys
4. Application of grey relational analysis to determine welding parameters for Nd:YAG laser GMA hybrid welding of aluminium alloy10.1179/174329307X249423 ↗
5. Problems and issues in laser beam welding of aluminum-lithium alloys10.1016/j.jmapro.2013.10.005 ↗
6. Self-similar patterns of damage development and reliability assessment of AMg6 and D16T aluminum alloys under consecutive dynamic and gigacycle loading10.1134/S1029959919020048 ↗
7. Evaluating mechanical and metallurgical properties of gas tungsten arc welded AA 5059 aluminium alloy joints10.1016/j.matpr.2019.06.696 ↗
8. Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy10.1007/s40194-017-0447-8 ↗
9. Tensile strength on friction stir processed AMg5 (5083) aluminum alloy
10. Influence of shielding gas on the mechanical and metallurgical properties of DP-GMA-welded 5083-H321 aluminum alloy10.1007/s12613-016-1365-2 ↗
11. Mechanical properties of laser beam welded similar and dissimilar aluminum alloys10.1016/j.jmapro.2017.07.030 ↗
12. Experimental study on welding characteristics of CO2 laser TIG hybrid welding process10.1179/174329306X129535 ↗
13. Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer10.1016/j.scriptamat.2006.04.025 ↗
14. Fibre laser welding of aluminium alloy10.1080/09507110902836911 ↗
15. The influence of process parameters on porosity formation in hybrid LASER-GMA welding of AA6082 aluminum alloy10.1016/j.optlastec.2011.12.014 ↗
16. Microstructure and mechanical properties of simultaneously explosively-welded Steel/Cu pipes and Al/Cu pipe/rod10.1016/j.jmapro.2019.10.004 ↗
17. Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties10.1016/j.optlastec.2018.09.036 ↗
18. Laser beam and laser-arc hybrid welding of aluminium alloys
19. Observation of hybrid (cw Nd:YAG laser+MIG) welding phenomenon in AA 5083 butt joints with different gap condition10.1179/174329306X107674 ↗
20. Low speed laser welding of aluminium alloys using single-mode fiber lasers
21. Comparison of solidification cracking susceptibility between Al-Mg and Al-Cu alloys during welding: a phase-field study10.1016/j.scriptamat.2018.03.013 ↗
22. Effect of power distribution on the weld quality during hybrid laser welding of an Al-Mg alloy10.1016/j.optlastec.2015.04.021 ↗
23. Hot cracking in pulsed Nd:YAG laser welding of AA545610.1016/j.optlastec.2018.01.020 ↗
24. Ultrafast laser welding of ceramics10.1126/science.aaw6699 ↗
25. Ultrafast laser processing of materials: from science to industry10.1038/lsa.2016.133 ↗
26. Using pulse shaping to control temporal strain development and solidification cracking in pulsed laser welding of 6082 aluminum alloys10.1016/j.jmatprotec.2015.06.007 ↗
27. Study on the burning loss of magnesium in fiber laser welding of an Al-Mg alloy by optical emission spectroscopy10.1007/s00170-016-8867-y ↗
28. The influences of Ar-He shielding gas mixture on welding characteristics of fiber laser-MIG hybrid welding of aluminum alloy10.1016/j.optlastec.2018.12.011 ↗
29. Ultrasonic-assisted laser welding on AISI 321 stainless steel10.1007/s40194-019-00716-1 ↗
30. Automatic cell counting with ImageJ10.1016/j.ab.2014.12.007 ↗
31. Multi-physics multi-scale simulation of the solidification process in the molten pool during laser welding of aluminum alloys10.1016/j.ijheatmasstransfer.2020.120316 ↗
32. Multi-scale simulation of grain/sub-grain structure evolution during solidification in laser welding of aluminum alloys10.1016/j.ijheatmasstransfer.2019.119252 ↗
33. Identification of nucleation mechanism in laser welds of aluminum alloy10.1007/s00339-019-2693-7 ↗
34. Second paper on statistics associated with the random disorientation of cubes10.1093/biomet/45.1-2.229 ↗
35. Study on microstructure and mechanical properties of Al-Mg-Mn-Er alloy joints welded by TIG and laser beam10.1016/j.matdes.2012.03.041 ↗
36. Influence of ultrasonic peening on microstructure and surface performance of laser-arc hybrid welded 5A06 aluminum alloy joint10.1016/j.jmrt.2020.06.057 ↗
37. Investigate on the porosity morphology and formation mechanism in laser-MIG hybrid welded joint for 5A06 aluminum alloy with Y-shaped groove10.1016/j.jmapro.2020.07.044 ↗