Study on the fatigue performance and Residual Stress of subsurface fluid flow of 2519a aluminum alloy based on water jet peening
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Aluminum alloy 2519 in military vehicles
2. Eliminating hole defects and improving microstructure and mechanical properties of friction stir welded joint of 2519 aluminum alloy via TIG arc10.1016/j.jmatprotec.2022.117773 ↗
3. Effects of metastable θ′ precipitates on the strengthening, wear and electrical behaviors of Al 2519-SiC/fly ash hybrid nanocomposites synthesized by powder metallurgy technique
4. Effect of multifunction cavitation on rotating bending fatigue properties of steel rods and its fatigue limit estimation10.1016/j.ijfatigue.2023.107852 ↗
5. Effect mechanisms of micro-alloying element La on microstructure and mechanical properties of hypoeutectic Al-Si alloys10.1016/j.jmst.2019.12.021 ↗
6. Control of macrostructure in deformation processing of metal/metal laminates10.1016/j.actamat.2004.09.033 ↗
7. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
8. Toughening mechanisms for the dynamic perforation behavior of laminar aluminum alloy with lubricated frictional interfaces
9. Current progress in rheoforming of wrought aluminum alloys: a review10.3390/met10020238 ↗
10. Residual stresses in high-speed two-dimensional ultrasonic rolling 7050 aluminum alloy with thermal-mechanical coupling10.1016/j.ijmecsci.2020.105824 ↗
11. Crystal plasticity modelling of stability of residual stresses induced by shot peening10.1016/j.ijmecsci.2022.107526 ↗
12. A dynamic cold expansion method to improve fatigue performance of holed structures based on electromagnetic load10.1016/j.ijfatigue.2021.106253 ↗
13. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion10.1016/j.jmst.2021.04.030 ↗
14. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
15. Evolution of surface to interior microstructure of SCM435 steel after ultra-high-temperature and ultra-high-pressure cavitation processing10.1016/j.jmatprotec.2017.08.016 ↗
16. Surface characteristics and residual stress generation in Ti-6Al-4 V following ultrasonic pulsed water jet peening10.1016/j.surfcoat.2022.128691 ↗
17. Ultrasonic pulsed waterjet peening of commercially-pure titanium10.1016/j.surfcoat.2023.129953 ↗
18. Cavitation erosion behavior and anti-cavitation erosion mechanism of NiTi alloys impacted by water jet
19. Cavitation erosion behaviors and damage mechanism of Ti-Ni alloy impacted by water jet with different standoff distances10.1016/j.engfailanal.2022.106458 ↗
20. Effect of pulsating water jet processing on erosion grooves and microstructure in the subsurface layer of 25CrMo4 (EA4T) steel
21. Effect of multifunction cavitation using phosphoric acid on fatigue and surface properties of AZ31 magnesium alloy10.1016/j.jma.2023.04.005 ↗
22. The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick inconel 718
23. Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy10.1016/j.vacuum.2023.112446 ↗
24. Research on the surface corrosion behavior of 7075-T6 aluminum alloy during high-speed machining and particle inclusion water jet composite reinforcement
25. Study on multi-field composite strengthening, surface integrity, and microstructural evolution mechanism of 7075-T6 aluminum alloy10.1016/j.vacuum.2023.112762 ↗
26. Influence of SiC pellets water jet peening on the surface integrity of 7075-T6 aluminum alloy10.1016/j.vacuum.2021.110760 ↗
27. Influence of submerged micro-abrasive waterjet peening on surface integrity and fatigue performance of TA19 titanium alloy10.1016/j.ijfatigue.2022.107076 ↗
28. Fretting fatigue life improvement of nickel-based superalloy GH4169 dovetail slots by deflecting abrasive waterjet peening process10.1016/j.ijfatigue.2023.107832 ↗
29. Three-dimensional stochastic modeling of metallic surface roughness resulting from pure waterjet peening10.1016/j.ijengsci.2017.08.011 ↗
30. Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy10.1016/j.vacuum.2022.111532 ↗
31. Numerical study on fatigue crack behavior in abrasive waterjet peening10.1007/s00170-023-11742-1 ↗
32. Dynamic mechanical properties and constitutive equations of 2519A aluminum alloy10.1016/S1003-6326(14)63330-6 ↗
33. Experimental investigation on surface characteristics of Ti6Al4V alloy during abrasive water jet machining process10.1016/j.aej.2022.01.004 ↗
34. Improvement in the quality of the processed material surfaces lies in the moving of nozzle in the cavitation processing
35. Investigation of water jet peening process parameters on AL6061-T610.1080/02670844.2017.1394564 ↗
36. Effects of water jet peening on residual stresses, roughness, and fatigue10.1080/02670844.2020.1850196 ↗
37. Performance analysis of 7075 aluminum alloy strengthened by cavitation water jet peening at different scanning speeds10.3390/cryst12101451 ↗
38. Dual-processing by abrasive waterjet machining—a method for machining and surface modification of nickel-based superalloy10.1016/j.jmatprotec.2020.116768 ↗
39. Abrasive waterjet peening with elastic prestress: a parametric evaluation10.1016/j.ijmachtools.2008.10.001 ↗
40. Evaluation of surface integrity in 18CrNiMo7-6 steel after multiple abrasive waterjet peening process10.3390/met10060844 ↗
41. Experimental study on ship fouling cleaning by ultrasonic-enhanced submerged cavitation jet: a preliminary study10.1016/j.oceaneng.2022.111844 ↗
42. Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets
43. Water droplet erosion assessment in the initial stages on AISI 316 L using kernel average misorientation
44. Influence of surface roughness on liquid droplet impingement erosion10.1016/j.wear.2019.202955 ↗
45. The effect of initial surface roughness on water droplet erosion behaviour