journal article·2021-05

A low-temperature sealing method for metal-supported oxide fuel cell applications: Ni–Sn transient liquid phase bonding

Jian Cao, Mushi Zheng, Zhiquan Wang, Xiaoqing Si, Chun Li, Xiaoyang Wang, Zongjing He, Junlei Qi

Vacuum· Volume 187
Publisher page

Abstract

Abstract A low-temperature sealing approach, transient liquid phase bonding with Ni–Sn system, was employed to seal metal-supported solid oxide fuel cell (MS-SOFC) components in this study. The Ni layer was prefabricated on the ferritic stainless steels by electroplating firstly, and then were vacuum annealed to enhance the bonding between the Ni coating and the steel substrate. Afterward, the Ni coated steels were transient liquid phase bonded using a thin interlayer of pure Sn. Effects of bonding temperature (250–400 °C) and holding time (10–60 min) on the interface of joints were investigated. The interfacial microstructure of joints was observed by the scanning electron microscope and the transmission electron microscope. A joint with full intermetallic compounds (IMCs) of Ni3Sn4 and Ni3Sn2 were formed at 400 °C/60 min. These Ni–Sn IMCs were all stable up to 794.5 °C, ensuring that the joint with full IMCs microstructure can be performed at the operating temperature of ∼600 °C for MS-SOFC. Furthermore, the residual Ni coating can also be served as a protective layer for the stack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Nanostructured composite cathodes by suspension plasma spraying for SOFC applications
2. Towards high power density metal supported solid oxide fuel cell for mobile applications10.1149/2.0741802jes ↗
3. Metal-supported SOFC with ceramic-based anode
4. Dynamic-temperature operation of metal-supported solid oxide fuel cells10.1016/j.jpowsour.2018.05.094 ↗
5. Oxidation behavior of a Ni-Fe support in SOFC anode atmosphere10.1016/j.jallcom.2018.04.326 ↗
6. Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2019.226935 ↗
7. Integration of Ni-GDC layer on a NiCrAl metal foam for SOFC application10.1016/j.jeurceramsoc.2016.09.021 ↗
8. Dynamic evaluation of low-temperature metal-supported solid oxide fuel cell oriented to auxiliary power units10.1016/j.jpowsour.2007.10.002 ↗
9. Development of metal supported solid oxide fuel cells for operation at 500-600°C10.1115/1.1794709 ↗
10. Fabrication and evaluation of the thin NiFe supported solid oxide fuel cell by co-firing method10.1016/j.energy.2010.07.018 ↗
11. Metal-supported solid oxide fuel cell operated at 400–600 °C10.1016/j.jpowsour.2007.02.070 ↗
12. A braze system for sealing metal-supported solid oxide fuel cells10.1016/j.jpowsour.2006.02.067 ↗
13. Influence of CaO/MgO ratio on the crystallization kinetics and interfacial compatibility with Crofer 22 APU and YSZ of strontium based alumino-borosilicate glasses for SOFC applications10.1016/j.ijhydene.2017.05.026 ↗
14. Glass ceramic sealants belonging to BAS (BaO–Al2O3–SiO2) ternary system modified with B2O3 addition: a different approach to access the SOFC seal issue10.1016/j.jeurceramsoc.2015.10.005 ↗
15. Impact of La2O3/Y2O3 ratio on crystallization kinetics of CaO based alumino-borosilicate glasses and compatibility with Crofer and 8YSZ for SOFCs10.1016/j.jnoncrysol.2019.119539 ↗
16. Effect of bismuth oxide on crystallization and sealing behavior of barium borosilicate glass sealant for SOFCs10.1016/j.jnoncrysol.2019.01.028 ↗
17. Reactive air brazing of YSZ ceramic with novel Al2O3 nanoparticles reinforced Ag-CuO-Al2O3 composite filler: microstructure and joint properties10.1016/j.matdes.2016.10.062 ↗
18. Evolution behavior of Al2O3 nanoparticles reinforcements during reactive air brazing and its role in improving the joint strength10.1016/j.matdes.2017.07.002 ↗
19. Transient porous nickel interlayers for improved silver-based Solid Oxide Fuel Cell brazes10.1016/j.actamat.2018.01.061 ↗
20. Microstructure and mechanical properties of reactive-air-brazed 3YSZ/crofer 22 APU joints at ambient temperature10.1007/s13632-020-00663-0 ↗
21. Reactive air brazing of the YSZ/AISI 310S couples using a novel Ag–Nb2O5 sealant10.1016/j.ceramint.2019.10.262 ↗
22. Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature10.1016/j.jpowsour.2008.10.117 ↗
23. Transient liquid phase bonding for solder-a short review10.1088/1757-899X/701/1/012050 ↗
24. Effect of CuZnAl particles addition on microstructure of Cu/Sn58Bi/Cu TLP bonding solder joints10.1016/j.vacuum.2019.06.024 ↗
25. The preparation and mechanical properties of carbon/carbon (C/C) composite and carbon fiber reinforced silicon carbide (Cf/SiC) composite joint by partial transient liquid phase (PTLP) diffusion bonding process10.1016/j.vacuum.2018.09.045 ↗
26. Fast formation of Ni-Sn intermetallic joints using Ni-Sn paste for high-temperature bonding applications10.1007/s10854-020-04068-1 ↗
27. Rapid Ag/Sn/Ag transient liquid phase bonding for high-temperature power devices packaging by the assistance of ultrasound10.1016/j.ultsonch.2017.02.016 ↗
28. Thermally stable bonding of SiC devices with ceramic substrates: transient liquid phase sintering using Cu/Sn powders10.1149/2.114308jes ↗
29. A transient liquid phase sintering bonding process using nickel-tin mixed powder for the new generation of high-temperature power devices10.1007/s11664-017-5357-4 ↗
30. High temperature investigation on a nickel–tin transient liquid-phase wafer bonding up to 600 °C10.1007/s00542-015-2738-6 ↗
31. Transient liquid phase bonding of Ti-6Al-4V and Mg-AZ31 alloys using Zn coatings10.3390/ma12050769 ↗
32. Application of Ni and Cu nanoparticles in transient liquid phase (TLP) bonding of Ti-6Al-4V and Mg-AZ31 alloys10.1007/s10853-014-8473-z ↗
33. Low temperature TLP bonding of Al2O3–ceramics using eutectic Au–(Ge, Si) alloys10.1007/s10853-013-7526-z ↗
34. Effect of cathode and electrolyte transport properties on chromium poisoning in solid oxide fuel cells10.1016/j.ijhydene.2006.08.005 ↗
35. Oxidation behavior of nickel coating on ferritic stainless steel interconnect for SOFC application10.1016/j.ijhydene.2014.09.138 ↗
36. Diffusion behavior and mechanical properties of Cu/Ni coating on TC4 alloy10.1016/j.vacuum.2017.06.004 ↗
37. The effect of vacuum annealing, cold isostatic pressing, and hydrogen annealing on the microstructure of atmospheric plasma sprayed tungsten coating10.1016/j.vacuum.2020.109287 ↗
38. Influence of annealing on the microstructure and mechanical properties of MTCVD TiC0.79N0.21 coating10.1016/j.vacuum.2017.10.040 ↗
39. Fabrication of 3D Ni nanosheet array on Crofer 22 APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs10.1016/j.ijhydene.2017.12.132 ↗
40. Hydrogen embrittlement in coating technology - measurement & testing
41. A new investigation of the system Ni–Sn10.1016/j.intermet.2006.10.045 ↗
42. High performance metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2018.11.004 ↗