journal article·2022-09-21

Cavity Engineering of Perovskite Distributed Feedback Lasers

Qi Dong, Xiangyu Fu, Dovletgeldi Seyitliyev, Kasra Darabi, Juliana Mendes, Lei Lei, Yi-An Chen, Chih-Hao Chang, Aram Amassian, Kenan Gundogdu, Franky So

ACS Photonics· Volume 9· Issue 9
Publisher page

Abstract

Perovskite distributed feedback (DFB) lasers are gaining increasing attention due to their solution processability, band gap tunability, single-mode operation, and low threshold. However, it is still challenging to fabricate high-quality DFB cavities on perovskite films, resulting in a mismatch between the optical resonance and the gain spectrum. To address these issues, here we develop a systematic facile approach to fabricate and design the cavities of perovskite surface-emitting DFB lasers. Using this approach, the cavity fabrication is simplified by adding polyvinylpyrrolidone into the perovskite precursor solutions, enabling a simple nanoimprint on perovskite films, while the cavity engineering is guided by a systematic optical mode analysis and conducted through simply varying the solution concentration to manipulate the effective index of the waveguide mode. With this methodology, we fabricated perovskite DBF lasers with an optimized optical resonance, whereby a low threshold of 20 μJ cm–2 was achieved. Our approach provides an effective way to fabricate high-performance perovskite DFB lasers. With this technique, we can easily realize high-precision cavity tuning with a precision of better than 5 nm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid State Laser Technologies · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27606, United States

Department of Physics, North Carolina State University, Raleigh, North Carolina 27606, United States

Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States

Funding

North Carolina State University · Division of Materials Research

References (39)

Show source-provided references
1. 10.1021/nl504877910.1021/nl5048779 ↗
2. 10.1126/science.aaa576010.1126/science.aaa5760 ↗
3. 10.1039/C4SC03141E10.1039/C4SC03141E ↗
4. 10.1021/acsenergylett.6b0019610.1021/acsenergylett.6b00196 ↗
5. 10.1063/1.486477810.1063/1.4864778 ↗
6. 10.1126/science.aad584510.1126/science.aad5845 ↗
7. 10.1021/acs.chemmater.5b0376910.1021/acs.chemmater.5b03769 ↗
8. 10.1038/nmat391110.1038/nmat3911 ↗
9. 10.1364/oe.24.02367710.1364/oe.24.023677 ↗
10. 10.1063/1.496389310.1063/1.4963893 ↗
11. 10.1021/acs.nanolett.6b0194610.1021/acs.nanolett.6b01946 ↗
12. 10.1021/acsphotonics.8b0141310.1021/acsphotonics.8b01413 ↗
13. 10.1039/C9CS00711C10.1039/C9CS00711C ↗
14. 10.1021/acsnano.8b0485410.1021/acsnano.8b04854 ↗
15. 10.1002/adma.20190371710.1002/adma.201903717 ↗
16. 10.1021/acsnano.9b0698010.1021/acsnano.9b06980 ↗
17. 10.1021/acsnano.6b0547810.1021/acsnano.6b05478 ↗
18. 10.1021/acsnano.8b0959210.1021/acsnano.8b09592 ↗
19. 10.1002/adma.20160500310.1002/adma.201605003 ↗
20. 10.1002/adom.20190129710.1002/adom.201901297 ↗
21. 10.1002/adma.20150260810.1002/adma.201502608 ↗
22. 10.1063/1.474504710.1063/1.4745047 ↗
23. 10.1364/OE.20.00635710.1364/OE.20.006357 ↗
24. 10.1021/acs.jpclett.6b0043310.1021/acs.jpclett.6b00433 ↗
25. 10.1038/nmat401410.1038/nmat4014 ↗
26. 10.1021/acsaem.9b0020610.1021/acsaem.9b00206 ↗
27. 10.1002/aenm.20150112110.1002/aenm.201501121 ↗
28. 10.1021/acsomega.8b0055510.1021/acsomega.8b00555 ↗
29. 10.1126/sciadv.170010610.1126/sciadv.1700106 ↗
30. 10.1038/s41467-018-03169-010.1038/s41467-018-03169-0 ↗
31. 10.1021/acsaelm.0c0032610.1021/acsaelm.0c00326 ↗
32. 10.1103/PhysRevB.64.12512210.1103/PhysRevB.64.125122 ↗
33. 10.1038/s41598-019-47589-410.1038/s41598-019-47589-4 ↗
34. 10.1021/cr050152i10.1021/cr050152i ↗
35. 10.1016/j.orgel.2013.05.02510.1016/j.orgel.2013.05.025 ↗
36. 10.1364/OL.38.00253110.1364/OL.38.002531 ↗
37. 10.1016/S1386-9477(01)00184-910.1016/S1386-9477(01)00184-9 ↗
38. 10.1039/C3TC32077D10.1039/C3TC32077D ↗
39. 10.1002/ADMA.20160411310.1002/ADMA.201604113 ↗