Effects of sliding speed and testing temperature on the tribological behavior of a nickel-alloy based solid-lubricating composite
Source abstract
Abstract
Abstract High temperature solid lubricating materials show important demands in applications for moving machine assemblies under extreme operating conditions. In this study, the tribological behavior of a nickel-alloy based self-lubricating composite (82.5%nickel-alloy–12.5%Ag–5%BaF 2 /CaF 2 ) against Si 3 N 4 ball was evaluated under various temperatures and sliding speeds. Results showed that the friction coefficient and wear rate of the composite were greatly dependent on testing temperature and sliding speed. The composite exhibited favorable lubricity in the wide temperature range from 25 °C to 800 °C. The friction and wear mechanisms were explored by observing and analyzing the worn surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Tribological properties of PM212: a high-temperature, self-lubricating, powder metallurgy composite
2. C.S. DellaCort, B.J. Edmonds, NASA PS400: a new high temperature solid lubricant coating for high temperature wear applications, NASA-TM-2009-215678, 2009
3. C.S. DellaCort, B.J. Edmonds, High temperature solid lubricant coating for high temperature wear applications, US 8,753,417 B1, 2014.
4. Peterson · 1994
5. A crystal-chemical approach to lubrication by solid oxides10.1023/A:1019183101329 ↗
6. Adaptive NbN/Ag coatings for high temperature tribological applications10.1016/j.surfcoat.2012.04.054 ↗
7. Correlation between friction and wear properties and electrical performance of silver coated electrical connectors10.1016/j.wear.2015.02.026 ↗
8. High-temperature wear behavior of self-lubricating Co matrix alloys prepared by P/M10.1016/j.wear.2015.11.009 ↗
9. Tribological properties of self-lubricating fluoride-metal composites to 900 °C (1650 °F)-A review and some new developments
10. Chameleon coatings: adaptive surfaces to reduce friction and wear in extreme environments10.1146/annurev-matsci-082908-145259 ↗
11. Self-lubricating composites of porous nickel and nickel-chromium alloy impregnated with barium fluoride-calcium10.1080/05698196608972150 ↗
12. C. Dellacorte, B.J. Edmonds, Preliminary evaluation of PS300: a new self-lubricating high temperature composite coating for use to 800°C, US NASA-TM 107056, 1996
13. Ni3Al matrix high temperature self-lubricating composites10.1016/j.triboint.2010.11.016 ↗
14. A nickel-alloy-based high-temperature self-Lubricating composite with simultaneously superior lubricity and high strength10.1007/s11249-012-0101-y ↗
15. Tribological behaviors of NiAl based self-lubricating composites containing different solid lubricants at elevated temperatures10.1016/j.wear.2013.12.002 ↗
16. Tribological behavior of Ni3Al matrix self-lubricating composites containing WS2, Ag and hBN tested from room temperature to 800°C10.1016/j.matdes.2013.09.051 ↗
17. Tribological properties of Ni3Al matrix composites with addition of silver and barium salt10.1016/j.triboint.2014.12.009 ↗
18. Effect of sliding speed and counterface properties on the tribo-oxidation of brush seal material under dry sliding conditions10.1016/j.triboint.2013.02.010 ↗
19. Effects of sliding velocity and ambient temperature on the friction and wear of a boundary-lubricated, multi-layered DLC coating10.1016/j.wear.2014.04.002 ↗
20. Friction and wear behavior of nickel-alloy-based high temperature self-lubricating composites against Si3N4 and Inconel 71810.1016/j.triboint.2014.03.005 ↗
21. A study of the tribological behavior of transfer films of PTFE composites formed under different loads, speeds and morphologies of the counterface10.1016/j.wear.2015.01.028 ↗
22. Research on the thickness of the friction layer of Ni3Al matrix composites with graphene nanoplatelets10.1007/s11249-015-0568-4 ↗
23. Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites10.1016/j.wear.2010.08.013 ↗
24. The effect of sliding speed and temperature on the tribological behaviour of carbon–carbon composites10.1016/S0043-1648(01)00554-3 ↗
25. Effects of sliding velocity on surface modification and tribological behavior of copper–graphite composite10.1007/s11249-010-9718-x ↗
26. The effects of speed, film thickness and substrate surface roughness on the friction and wear of soft metal films in ultrahigh vacuum10.1016/0040-6090(78)90226-2 ↗
27. Fabrication and high-temperature tribological properties of self-lubricating NiCr-BaMoO4 composites10.1016/j.wear.2015.01.063 ↗