Friction and wear behaviour of electron beam surface treated aluminium alloys AlSi10Mg(Cu) and AlSi35
Source abstract
Abstract
Abstract Because of their low density, Al based materials are increasingly used for state-of-the-art lightweight construction solutions. With regard to systems subjected to wear, Al alloys cannot be used for highly stressed components, unless they have been made resistant against wear by additional measures such as surface treatment. Electron beam (EB) surface treatment offers a possibility for producing hard wear-resistant layers on components made of Al alloys. Concerning Al materials, distinct improvements of layer properties can be achieved exclusively by the use of liquid phase surface processes (remelting, alloying, dispersing and cladding). The paper deals with current results of investigations in the field of EB surface remelting and alloying technologies of cast alloy AlSi10Mg(Cu) and spray-formed alloy AlSi35. The EB surface treatment of these alloys causes significant changes of properties in surface layers with depths of 0.5–4.0 mm basing on a local modification of microstructure. The hardness and scratch energy density of surface layers are 2–7 times higher than those of the base materials. Moreover, studies on friction and wear behavior under oil lubricated conditions at 80 °C impressively demonstrate the upgraded surface layer properties. Depending on the type of EB-alloying additives (Co, Cu, Ni powder) the specific wear rate decreases by a factor of 10–50 by effectuating a lower coefficient of friction simultaneously. The technologies discussed give a picture of the potential of EB technologies and offer new possibilities for improving service life and reliability of engine components, among others.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H.H. Becker, A. Gebauer-Teichmann, Magnesiumguss im Fahrzeugbau, VDI-Spezialtag, 12.02.2009, Magdeburg, pp. 1–22 (Chapter 5).
2. Nie · Surface and Coatings Technology · 2002 · 149 · 210.1016/S0257-8972(01)01453-0 ↗
3. Nakata · Surface and Coatings Technology · 2003 · 169 · 44310.1016/S0257-8972(03)00187-7 ↗
4. Baragetti · Surface and Coatings Technology · 2009 · 203 · 2010.1016/j.surfcoat.2009.03.040 ↗
5. Blanc · Corrosion Science · 2010 · 52 · 310.1016/j.corsci.2009.11.023 ↗
6. Awad · Wear · 2006 · 260 · 110.1016/j.wear.2005.01.029 ↗
7. A. Buchwalder, Beitrag zur Flüssigphasen- Randschichtbehandlung von Bauteilen aus Aluminiumwerkstoffen mittels Elektronenstrahl, Dissertation, TU Bergakademie Freiberg, 2007, pp. 33–40, 88–92.
8. R. Franke, I. Haase, R. Zenker, R. Hoffmann, H.-G. Friedel, Tribologie und Schmierungstechnik 45 (1998) 36–41.
9. Dilthey · Surface Engineering · 2008 · 24 · 7510.1179/174329408X277466 ↗
10. Viswanathan · Surface Engineering · 2007 · 23 · 12310.1179/174329407X169458 ↗
11. Heydarzadeh Sohi · Journal of Materials Processing Technology · 2001 · 118 · 18710.1016/S0924-0136(01)00912-8 ↗
12. Petrov · Vacuum · 1993 · 44 · 5710.1016/0042-207X(93)90321-Z ↗
13. R. Zenker, A. Buchwalder, A. Haustein, S. Thiemer, N. Frenkler, J. Backofen, Grundlagenuntersuchungen zu Elektronenstrahl-Flüssigphasenprozes-sen (FLUTEC), 2003 (SAB 6522/1006), final report.
14. M. Klemm, R. Franke, I. Haase, A. Rose, R. Zenker, Journal of the Japan Society for Heat Treatment 49 (2009) Vol. 1 – NETSU SHORI (Special Issue) (ISSN: 0288-0490) as Proceedings of the 17th IFHTSE Congress, Kobe, 27–30.10.2008, pp. 173–176.
15. M. Klemm, R. Franke, I. Haase, A. Rose, R. Zenker, EЛEKTPOTEXHИKA И EЛEKTPOHИKA (E+E) 5/6 2009 (Proceedings of the 9th International Conference on Electron Beam Technologies: 1–4.6.2009), Varna, 2009, pp. 123–127.
16. R. Zenker, A. Buchwalder, M. Klemm, HTM Journal of Heat Treatment and Materials 64 (2009) 4 (formerly HTM Zeitschrift für Werkstoffe, Wärmebehandlung, Fertigung), pp. 208–214.
17. Zenker · Vakuum in Forschung und Praxis · 2005 · 17 · 6610.1002/vipr.200500247 ↗
18. Trademark right DE 101 57 403 (12.6.2003) Verfahren zum Schweißen von Bauteilen.
19. D. von Dobeneck, Economizing electron beam welding, in: The 2004 International Symposium on High Energy Density Beam Processing Technology, Kunming, China.
20. R. Zenker, A. Buchwalder, M. Mangler, N. Frenkler, K. Rüthrich, Elektronenstrahl- Mehrspot-/Mehrprozess-Technik zum Schweißen und zur Randschichtbehandlung; DVS-Tagung 17–19.09.08 in Dresden; Tagungsband, pp. 66–71.10.1002/vipr.200500247 ↗
21. R. Zenker, “NETSU SHORI” (Journal of the Japan Society for Heat Treatment) as Proceedings of the 17th IFHTSE Congress, Kobe, 27–30.10.2008, pp. 137–140.
22. A. Buchwalder, R. Zenker, Modern thermal electron beam processes. Research results and industrial applications, in: European Conference on Heat Treatment 2008; ECHT’08: 7–9.05.2008, Verona, 2008, AIM: CD (paper 38).
23. A. Buchwalder, Flüssigphasen-Randschichtbehandlung von Hochleistungsaluminiumwerkstoffen, in: Kolloquium “Thermische Elektronenstrahl (EB)-Technologien”, TU Bergakademie Freiberg, Institut für Werkstofftechnik, 29.01.2009.
24. Weisheit · Aluminium · 1996 · 72 · 522
25. Petrov · Vacuum · 1997 · 48 · 4910.1016/S0042-207X(96)00240-0 ↗