Some insights into effects of nanoparticles on sliding wear performance of epoxy nanocomposites
Source abstract
Abstract
Abstract In this work, the effects of nanoparticles on the tribological performances of epoxy-based composites were systematically investigated on a ball-on-plate apparatus in dry sliding conditions with a hardened steel ball. A series of nanosilica/epoxy nanocomposites were fabricated, using nanoparticles prepared by a special sol–gel technique, well dispersed up to 20 wt%. The wear results showed that nanosilica particles could improve the wear resistance of epoxy nanocomposites only when the content of nanoparticles was higher than a critical value (10 wt%), even though the static mechanical properties of the nanocomposites (such as microhardness, modulus, fracture toughness) were almost proportionally improved with an increase in the content of nanosilica particles. It was found that the continuous transfer film on the steel ball could be formed only with relatively high nanoparticle contents, ≥10 wt%, which may play a key role in determining the wear performance of nanocomposites in steady wear stage. On the basis of microscopic observations, the wear mechanisms for epoxy nanocomposites were further discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Wear behavior of epoxy matrix composites filled with uniform sized sub-micron spherical silica particles10.1016/S0043-1648(03)00220-5 ↗
2. Particulate dental composites under sliding wear conditions
3. Microstructure and tribological behavior of polymetric nanocomposites10.1108/00368790110383993 ↗
4. Wear mechanisms of polyetheretherketone composite filled with various kinds of SiC10.1016/S0043-1648(97)00178-6 ↗
5. Friction and wear of low nanometer Si3N4 filled epoxy composites10.1016/S0043-1648(03)00190-X ↗
6. Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO2, ZnO, CuO and SiC10.1016/j.wear.2004.08.009 ↗
7. Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatments10.1016/S0043-1648(03)00533-7 ↗
8. Tribological behavior of nanoclay/epoxy composites10.1016/j.matlet.2006.12.078 ↗
9. Wear of PEEK composites related to their mechanical performances10.1016/j.triboint.2003.09.005 ↗
10. Effect of temperature and strain rate on fracture toughness of PEEK and its short glass fiber composites10.1016/0032-3861(86)90272-7 ↗
11. Effect of short fibre reinforcement on fatigue crack propagation and fracture of PEEK matrix composites10.1016/0010-4361(86)91004-9 ↗
12. Impact and wear resistance of polymer nanocomposites at low filler content10.1002/pen.11084 ↗
13. Optimization of tribological and mechqanical properties of epoxy through hybrid filling10.1016/j.wear.2010.03.001 ↗
14. Erosive wear of polymer surfaces by steel ball blasting10.1007/BF00553375 ↗
15. Study of the tribological synergistic effects in nano CuO-filled and fiber reinforced polyphenylene sulfide composites10.1016/j.wear.2004.09.055 ↗
16. The influence of nanoparticles fillers in polymer matrices on the formation and stability of transfer film during wear10.1016/S1572-3364(08)55002-6 ↗
17. The development of transfer layers and their role in polymer tribology10.1016/S0043-1648(00)00469-5 ↗
18. Theory for the deagglomeration of pigment clusters in dispersion machinery by mechanical forces. II
19. The friction and wear properties of nanometer ZrO2-Filled polyetheretherketone10.1002/(SICI)1097-4628(19980705)69:1<135::AID-APP16>3.0.CO;2-Z ↗
20. Nanoscale tribology, energy dissipation and failure mechanisms of nano- and micro-silica particle-filled polymer composites10.1007/s11249-008-9376-4 ↗
21. Toughening epoxies with halloysite nanotubes10.1016/j.polymer.2008.09.027 ↗
22. On fracture toughness of nano-particle modified epoxy10.1016/j.compositesb.2011.05.014 ↗
23. Toughening mechanisms of nanoparticle-modified epoxy polymers10.1016/j.polymer.2006.11.038 ↗
24. Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content10.1016/j.actamat.2005.12.009 ↗
25. Phase structure and adhesion in polymer blends: a criterion for rubber toughening10.1016/0032-3861(85)90015-1 ↗
26. A generalize criterion for rubber toughening: the critical matrix ligament thickness10.1002/app.1988.070350220 ↗