Influence of lubricant formulation on rolling contact fatigue of gears – interaction of lubricant additives with fatigue cracks
Source abstract
Abstract
Abstract The influence of lubricant additives on rolling contact fatigue crack propagation and the mechanisms responsible for the resulting micro-scale damage, was studied via experiments conducted on complete transmissions in a test cell. Bench-scale tribological tests and the exposure of steel surfaces to two different formulated lubricants were also carried out. Scanning and Transmission Electronic Microscopy observations, Electron Dispersive Energy and X-ray Photoelectron Spectroscopy analyses indicated that the sulphur present in the extreme pressure (EP) additives has a positive impact on limiting damage propagation. Thanks to TEM observations of cracks, it was demonstrated that a sulphur rich film is formed at the crack tip. This film can act as both a barrier film towards hydrogen permeation within the metal and / or as an inhibitor of oil decomposition. The latter is associated with the nascent surface's ability to limit hydrogen generation. Without such hydrogen embrittlement, crack propagation is slowed down.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Mechanical stress and fatigue analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Pitting due to rolling contact10.1115/1.4008607 ↗
2. The mechanism of rolling contact fatigue: an update10.1243/135065005X9808 ↗
3. Spalling formation mechanism for gears10.1016/S0043-1648(03)00126-1 ↗
4. W.E. Littmann, The mechanism of contact fatigue, in: Interdiscip. Approach Lubr. Conc. Contacts, P. M. Ku, Troy, NY, 1969: pp. 309–378.
5. Prediction of traction and microgeometry effects on rolling contact fatigue life10.1115/1.3453127 ↗
6. Surface and subsurface rolling contact fatigue characteristic depths and proposal of stress indexes10.1016/j.ijfatigue.2012.06.012 ↗
7. Role of inclusions, surface roughness and operating conditions on rolling contact fatigue10.1115/1.2833927 ↗
8. Contact fatigue of automotive gears: evolution and effects of residual stresses introduced by surface treatments10.1046/j.1460-2695.2000.00268.x ↗
9. Influence of oil temperature on gear failures10.1016/S0301-679X(03)00047-1 ↗
10. Effect of ageing automotive gear oils on scuffing and pitting10.1016/j.triboint.2007.12.010 ↗
11. Chemical effects of lubrication in contact fatigue − 3. load-life exponent, life scatter, and overall analysis10.1115/1.3452832 ↗
12. Gear oil micropitting evaluation
13. An additive's influence on the pitting and wear of ball bearing steel10.1016/0043-1648(95)06751-5 ↗
14. The effect of a friction modifier additive on micropitting10.1080/10402000902745507 ↗
15. A.F. Bower, Influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks, in, 1988.10.1115/1.3261717 ↗
16. Direct observations of a micropit in an elastohydrodynamic contact10.1016/S0043-1648(03)00374-0 ↗
17. Effects of oil hydraulic pressure on surface crack growth in rolling/sliding contact10.1016/0301-679X(87)90076-4 ↗
18. A new method for the measurement of mode II fatigue threshold stress intensity factor range ΔKτth10.1111/j.1460-2695.1997.tb01530.x ↗
19. On propagation of short rolling contact fatigue cracks10.1046/j.1460-2695.2003.00657.x ↗
20. Effect of lubricant additives in rolling contact fatigue10.1243/13506501JET719 ↗
21. WS2 nanoadditized lubricant for applications affected by hydrogen embrittlement10.1039/C5RA03127C ↗
22. Effect of sulfur-containing additive on the decomposition of multialkylated cyclopentane oil on the nascent steel surface10.1016/j.wear.2009.03.028 ↗
23. Effect of lubricant additives on tribochemical decomposition of hydrocarbon oil on nascent steel surfaces10.1627/jpi.53.55 ↗
24. Antispalling Effect of WS2 Nanoparticles on the Lubrication of Automotive Gearboxes10.1080/10402004.2015.1061080 ↗
25. Friction-enhancing properties of ZDDP antiwear additive: part I - Friction and morphology of ZDDP reaction films10.1080/10402000308982630 ↗
26. Friction-enhancing properties of ZDDP antiwear additive: part II - Influence of ZDDP reaction films on EHD lubrication10.1080/10402000308982631 ↗
27. Influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks10.1115/1.3261717 ↗
28. C. Minfray, G. Fromentin, A. Bierla, J.-M. Martin, T. Le Mogne, The effect of an organic pentasulfide EP additive in turning and milling operations, Wear. (n.d.). doi:10.1016/j.wear.2014.05.009.10.1016/j.wear.2014.05.009 ↗
29. Descostes · Appl. Surf. Sci. · 2000 · 165 · 28810.1016/S0169-4332(00)00443-8 ↗
30. The influence of hydrogen on rolling contact fatigue life and its improvement10.1016/S0389-4304(03)00035-3 ↗
31. H. Uyama, The Mechanism of White Structure Flaking In Rolling Bearings〈http://www.nrel.gov/wind/pdfs/day2_sessioniv_1_nsk_uyama.pdf〉, 2011.
32. Understanding white etching cracks in rolling element bearings: the effect of hydrogen charging on the formation mechanisms10.1177/1350650114522452 ↗
33. Study on mechanism of hydrogen generation from lubricants10.1080/05698190500486324 ↗
34. Assessment of hydrogen cracking risk in multipass weld metal of 2.25Cr-1Mo-0.25V-TiB (T24) boiler steel10.1007/BF03263423 ↗
35. The effect of the chemical structures of synthetic hydrocarbon oils on their tribochemical decomposition10.1007/s11249-015-0606-2 ↗
36. W. Gerberich, Modeling hydrogen induced damage mechanisms in metals, in: Gaseous Hydrog. Embrittlement Mater. Energy Technol. Mech. Model. Future Dev., 2012, pp. 209–246.10.1533/9780857095374.2.209 ↗