journal article·2023-09Open access

Nonlocal thermomechanical coupled analysis of wheel-rail contact using a peridynamic model

Xiaoming Wang, Weijia Dong, Qing He, Boyang An, Haohao Ding, Ping Wang, Wenjian Wang, Jun Huang

Wear· Volume 528-529

Abstract

Nonlocal peridynamic (PD) theory is widely used in damage and thermomechanical coupling simulations. This study applied ordinary state-based PD thermomechanics to model the wheel-rail contact bringing temperature-dependent materials. A two-dimensional coupled thermomechanical model was developed to predict the evolution of the thermomechanical response, thermal damage, and wear in railway rail. The model was verified based on the displacement and temperature fields of the rail. The model results correlated well with the finite element model and analytical method results. The influence of the vehicle speed, rail surface cracks, and wheel idling on the thermomechanical response of the rail was also evaluated in detail. The results show that the influence of the vehicle speed on the temperature field is much greater than that of the contact stress. The contact temperature under the critical creepage could lead to the formation of a brittle white etching layer (WEL). Cracks on the rail surface increased the contact stress and temperature peaks. Thermomechanical loading also promoted rail surface damage. Continuous thermomechanical loading due to wheel idling softened and removed rail surface materials, forming wear pits and a WEL, known as wheel burns.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Numerical methods in engineering · Railway Engineering and Dynamics · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure10.1016/j.triboint.2017.09.010 ↗
2. Fatigue analysis of railway wheels under combined thermal and mechanical loads10.1080/01495739.2013.850967 ↗
3. Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview10.1016/j.wear.2004.03.039 ↗
4. Thermo-elastic–plastic finite element analysis of wheel/rail sliding contact10.1016/j.wear.2010.10.034 ↗
5. Study on wear and rolling contact fatigue behaviours of defective rail under different slip ratio and contact stress conditions10.1016/j.triboint.2022.107491 ↗
6. Modelling rail wear transition and mechanism due to frictional heating10.1016/j.wear.2012.02.017 ↗
7. Modelling of heat conduction and phase transformations during sliding of railway wheels10.1016/S0043-1648(02)00119-9 ↗
8. Analytical 1D model for analysis of the thermally affected zone formed during railway wheel skid10.1016/S0043-1648(99)00167-2 ↗
9. Full-scale railway wheel flat experiments10.1243/0954409991530985 ↗
10. Microstructural investigation of white etching layer on pearlite steel rail10.1016/j.msea.2006.01.033 ↗
11. Laboratory simulation of martensite formation of white etching layer in rail steel10.1016/j.ijfatigue.2016.05.016 ↗
12. Relating contact temperature and wear transitions in a wheel–rail contact10.1016/j.wear.2010.10.046 ↗
13. Study on wear and rolling contact fatigue behaviors of wheel/rail materials under different slip ratio conditions10.1016/j.wear.2016.04.028 ↗
14. Mapping rail wear regimes and transitions10.1016/j.wear.2004.03.019 ↗
15. Temperature in a twin-disc wheel/rail contact simulation10.1016/j.triboint.2006.01.028 ↗
16. The solution of frictional wheel–rail rolling contact with a 3D transient finite element model: validation and error analysis10.1016/j.wear.2010.10.007 ↗
17. Finite element analyses of slope stability problems using non-associated plasticity10.1016/j.jrmge.2018.09.002 ↗
18. 3-D analysis of thermal-mechanical behavior of wheel/rail sliding contact considering temperature characteristics of materials10.1016/j.applthermaleng.2016.12.136 ↗
19. Thermo-mechanical coupled finite element analysis of rolling contact fatigue and wear properties of a rail steel under different slip ratios10.1016/j.triboint.2019.105943 ↗
20. Finite-speed propagation of heat: a nonlocal and nonlinear approach10.1016/S0378-4371(97)00552-9 ↗
21. Reformulation of elasticity theory for discontinuities and long-range forces10.1016/S0022-5096(99)00029-0 ↗
22. Peridynamic states and constitutive modeling10.1007/s10659-007-9125-1 ↗
23. A 2D peridynamic model for fatigue crack initiation of railheads10.1016/j.ijfatigue.2020.105536 ↗
24. A two-dimensional ordinary state-based peridynamic model for surface fatigue crack propagation in railheads10.1016/j.engfracmech.2022.108362 ↗
25. Peridynamic simulationons of RCF crack growth in laser quenched rail material10.1016/j.engfracmech.2022.108520 ↗
26. Peridynamic theory for thermomechanical analysis10.1109/TADVP.2009.2029079 ↗
27. Fully coupled peridynamic thermomechanics10.1016/j.jmps.2013.10.011 ↗
28. Nonlocal steady-state thermoelastic analysis of functionally graded materials by using peridynamic differential operator10.1016/j.apm.2020.12.004 ↗
29. Nonlocal thermoelastic damping in microelectromechanical resonators
30. Peridynamic simulation of thermal failure behaviors in rocks subjected to heating from boreholes10.1016/j.ijrmms.2019.03.007 ↗
31. Coupled thermal-hydraulic simulations of fracturing in granite under high temperature and high pressure treatment via peridynamic10.1016/j.ijrmms.2022.105247 ↗
32. An adaptive thermo-mechanical peridynamic model for crack analysis in anode-supported solid oxide fuel cell10.1016/j.jpowsour.2022.231998 ↗
33. Investigation on thermal failure of functionally graded materials using fully coupled thermo-mechanical peridynamics10.1016/j.compstruct.2022.116454 ↗
34. Peridynamics analysis of the nanoscale friction and wear properties of amorphous carbon thin films10.2140/jomms.2015.10.559 ↗
35. A meshfree method based on the peridynamic model of solid mechanics10.1016/j.compstruc.2004.11.026 ↗
36. Numerical modeling of dynamic frictional rolling contact with an explicit finite element method10.1016/j.triboint.2018.08.028 ↗
37. Dual-horizon peridynamics10.1002/nme.5257 ↗
38. Dual-horizon peridynamics: a stable solution to varying horizons10.1016/j.cma.2016.12.031 ↗
39. A GPU parallel scheme for accelerating 2D and 3D peridynamics models10.1016/j.tafmec.2022.103458 ↗
40. A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contact10.1016/S0043-1648(02)00120-5 ↗
41. Crack propagation behavior in white etching layer on rail steel surface10.1016/j.engfailanal.2019.06.067 ↗
42. Comparison of fatigue crack growth rate: pearlitic rail versus bainitic rail10.1016/j.ijfatigue.2021.106280 ↗
43. Tribological layers and the wear of ductile materials10.1016/S0043-1648(00)00480-4 ↗
44. Computer simulation of wear and rolling contact fatigue10.1016/S0043-1648(01)00732-3 ↗
45. Modelling the effect of steady state wheel temperature on rail wear10.1007/s11249-012-0061-2 ↗
46. Modelling thermal effects in ratcheting-led wear and rolling contact fatigue10.1016/j.wear.2008.02.026 ↗
47. The influence of high temperature due to high adhesion condition on rail damage10.1016/j.wear.2015.01.059 ↗
48. Thermo-elastic–plastic finite element analysis of wheel/rail sliding contact10.1016/j.wear.2010.10.034 ↗