Life time of cemented carbide inserts with Ni-Fe binder in steel turning
Source abstract
Abstract
Health concerns associated with cobalt powder are a strong motivator for conducting research on alternative binders for cemented carbides. It has previously been shown possible to make cemented carbides with alternative binders, which offer good hardness and toughness. However, it is not fully known if these cemented carbides can be successfully used as metal cutting tools. In this study we have tested turning inserts from cemented carbide with a nickel-iron binder and compared these with cobalt based reference inserts in dry face turning of steel in a pairwise comparison. To facilitate relevant comparisons, both the alternative binder and the reference cemented carbide are gradient sintered and coated in the same way as commercial turning grades. It is found that the life time in this dry face turning test is only approximately 15% shorter with the nickel-iron binder than with the cobalt reference, which motivates further studies with this alternative binder. Flaking of the coating and thus less coating adhesion was identified as one reason for the shorter life time.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Sandvik Coromant · 1994
2. Physical and chemical nature of cemented carbides
3. Cobalt and the dust environment of the cemented tungsten carbide industry10.2307/4586920 ↗
4. The production of malignant tumours by cobalt in the rat10.1038/bjc.1956.80 ↗
5. The production of malignant tumours by cobalt in the rat: intrathoracic tumours10.1038/bjc.1962.53 ↗
6. TR 581 – NTP Technical Report on the Toxicology of Cobalt Metal in F344/N Rats and B6C3F1/N Mice and Toxicology and Carcinogenesis Studies of Cobalt Metal in F344/NTac Rats and B6C3F1/N Mice (Inhalation Studies).
7. L.J. Prakash, Development of tungsten carbide hardmetals using iron-based binder alloys, Report KFK–2984, 1980.
8. Use of phase-diagram calculations in selecting the composition of Fe–Ni bonded WC tools
9. On the composition of Fe-Ni-Co-WC-based cemented carbides10.1016/S0263-4368(96)00023-6 ↗
10. Nickel in hardmetals10.1016/0263-4368(92)90056-8 ↗
11. Aspects of sintering of cemented carbides with Fe-based binders10.1016/j.ijrmhm.2014.07.028 ↗
12. Tougher cemented carbide material with iron-rich binder for steel turning and form-grooving10.1016/S0263-4368(96)00015-7 ↗
13. D. Waldorf, S. Liu, M. Stender, D. Norgan, alternative binder carbide tools for machining superalloys, in: Proceedings of the ASME 2008 International Manufacturing Science and Engineering Conference Collocated with the 3rd JSME/ASME International Conference on Materials and Processing, American Society of Mechanical Engineers, 2008, January, pp. 417–425.10.1115/MSEC_ICMP2008-72369 ↗
14. Characterization and properties of MTCVD Ti (C, N) coated cemented carbide substrates with Fe/Ni binder10.1016/j.ijrmhm.2009.10.004 ↗
15. Microstructure and properties of Ti (C, N) coatings produced by moderate temperature chemical vapour deposition10.1016/S0040-6090(01)01712-6 ↗
16. Deposition, microstructure and properties of texture-controlled CVD α-Al 2 O 3 coatings10.1016/j.ijrmhm.2005.05.004 ↗
17. W.C. Yohe, General Electric Company, Coated Carbide Cutting Tool Insert. U.S. Patent 4,548,786, 1985.
18. Kinetics of compositional modification of (W, Ti) C-WC-Co alloy surfaces10.1016/0025-5416(88)90500-9 ↗
19. Binder-phase enrichment by dissolution of cubic carbides10.1016/0263-4368(93)90062-K ↗
20. Investigations on kinetics of formation of fcc-free surface layers on cemented carbides with Fe–Ni–Co binders10.1016/j.ijrmhm.2010.12.007 ↗
21. Larsson · 2015
22. Mechanisms of plastic deformation of WC–Co and Ti (C, N)–WC–Co10.1016/j.ijrmhm.2005.04.009 ↗
23. Measurement good practice guide no. 20. Mechanical. tests for hardmetals
24. Birkholz · 2006
25. Sandvik Coromant (Firm), 〈http://www.sandvik.coromant.com/en-gb/knowledge/technologies/inveio/〉, viewed 2 september, 2016.
26. Investigation of cemented carbides with alternative binders after CVD coating10.1016/j.ijrmhm.2016.07.005 ↗