Case study: The application of machining-conditioning to improve the wear resistance of Ti6Al4V surfaces for human hip implants
Source abstract
Abstract
Abstract The purpose of this investigation was to determine the extent to which a combination of electron beam melting and specific machining procedures could improve the wear resistance of acetabular cups for hip implants. Electron Beam Melted Ti6Al4V samples, with a simplified geometry close to that of acetabular cups, were finished by machining. Wet and cryogenic machining with a different number of finishing passes were used to create different surface and sub-surface conditions. The Ti6Al4V samples were wear-tested against ASTM 1537 Co-Cr-Mo alloy using a commercial tribometer in a simulated implant environment. A change in the wear response was found as a function of the part surface topography and properties that resulted from the given machining operations. A correlation between the machining parameters and wear volume loss was assessed and discussed. Cryogenic cooling was the most promising of the evaluated machining approaches because it generated lower wear volume compared to wet conditions thanks to a hardened and more compressed surface and to the generation of a profile characterized by a reduced skewness, which revealed to be the most influencing texture parameter in enhancing the wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: improving tribology in metal-on-metal contact10.1080/10402004.2014.989348 ↗
2. In vitro analysis of the wear, wear debris and biological activity of surface-engineered coatings for use in metal-on-metal total hip replacements10.1243/095441103765212659 ↗
3. Cryogenic machining of biomedical implant materials for improved functional performance, life and sustainability10.1016/j.procir.2016.04.133 ↗
4. Temperature measurement in single point turning10.1016/S0924-0136(01)00853-6 ↗
5. The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy10.1007/s00170-013-5477-9 ↗
6. Improved surface integrity from cryogenic machining of Ti-6Al-7Nb alloy for biomedical applications10.1016/j.procir.2016.02.362 ↗
7. Enhancing the surface integrity and corrosion resistance of Ti-6Al-4V titanium alloy through cryogenic burnishing10.1007/s00170-016-9000-y ↗
8. Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications10.1016/j.triboint.2016.05.036 ↗
9. The effect of surface and subsurface condition on the fatigue life of Ti-25V-15Cr-2Al-0.2C %wt alloy10.1016/j.cirp.2016.04.074 ↗
10. The predictive Power of Surface Profile Parameters on the Amount of Wear Measured In Vitro on Metal-On-Polyethylene Artificial Hip Joints10.1243/09544119JEIM95 ↗
11. Manufacturing conditioned roughness and wear of biomedical oxide ceramics for all-ceramic knee implants10.1186/1475-925X-12-84 ↗
12. Variation in taper surface roughness for a single design effects the wear rate in total hip arthroplasty
13. Biotribocorrosion of CoCrMo orthopaedic implant materials-assessing the formation and effect of the biofilm10.1016/j.triboint.2007.02.019 ↗
14. Arcam EBM Built Materials: Ti6Al4V Titanium alloy. 〈http://www.arcam.com/wp-content/uploads/Arcam-Ti6Al4V-Titanium-Alloy.pdf〉 (Accessed October 2017).
15. Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy10.1016/j.wear.2015.01.030 ↗
16. Process mechanics and surface integrity induced by dry and cryogenic machining of AZ31B-O magnesium alloy10.1016/j.procir.2013.06.138 ↗
17. Enhancing the surface integrity of Ti-6Al-4V alloy through cryogenic burnishing10.1016/j.procir.2014.04.042 ↗
18. I.C. Noyan, J.B. Cohen, Nature of residual stress and its measurement, in: Proceedings of the Sagamore Army Material and Research Conference, Plenum Press: 1982: pp. 1–17.10.1007/978-1-4899-1884-0_1 ↗
19. ISO 25178-2 · 2012
20. The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacement10.1002/(SICI)1097-4636(1999)48:5<712::AID-JBM17>3.0.CO;2-R ↗
21. Quantitative Characterisation of Surface Texture10.1016/S0007-8506(07)63458-1 ↗
22. Whitehouse · 2002
23. Stout · 2000
24. Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty10.1016/j.ceramint.2014.08.123 ↗
25. Tribological characterisation of diamond-like carbon coatings on Co–Cr–Mo alloy for orthopaedic applications10.1016/S0257-8972(01)01425-6 ↗
26. ISO 14242-1 · 2002
27. 3D finite element modelling of surface modification in dry and cryogenic machining of EBM Ti6Al4V alloy
28. Machining induced surface integrity in titanium and nickel alloys: a review10.1016/j.ijmachtools.2010.11.003 ↗
29. Enhancing the surface integrity of Ti-6Al-4V alloy through cryogenic burnishing10.1016/j.procir.2014.04.042 ↗
30. The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V10.1007/s11661-010-0397-x ↗
31. Surface integrity in cryogenic machining of nickel based alloy—inconel 71810.1016/j.jmatprotec.2010.12.013 ↗
32. Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy10.1016/j.matdes.2015.08.099 ↗
33. Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steel10.1016/j.jmatprotec.2012.07.022 ↗
34. Cryogenic turning of the Ti-6Al-4V alloy with modified cutting tool inserts10.1016/j.cryogenics.2010.10.011 ↗
35. Effects of cryogenic cooling on surface layer characteristics produced by hard turning
36. Feasibility of cryogenic cooling in finishing turning of acetabular cups made of additive manufactured Ti6Al4V10.1016/j.procir.2016.04.029 ↗
37. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
38. Roles of microstructure in fatigue crack initiation10.1016/j.ijfatigue.2009.10.005 ↗