Investigation of tribological performance of the ultra-dispersive TBC-CNTs as additives for aqueous lubrication
Source abstract
Abstract
Carbon nanotubes (CNTs), as water-based additives, are potential candidates for reducing friction and wear whereas the weak dispersion stability impedes their application in aqueous lubrication. Therefore, CNTs were functionally modified by 4-tert-butylcatechol (TBC) nucleophilic for synthesizing the ultra-dispersive TBC-CNTs. The particle sizes and dispersibility of TBC-CNTs in water were investigated. It was found that particle sizes of the most of CNTs were reduced after modification and 0.035 wt% TBC-CNTs remained uniformly dispersed in water for 2 months. The lubrication behavior of TBC-CNTs as water-based additives for ceramic/steel tribo-pairs was investigated by using a ball-on-disc apparatus. Notably, the optimum concentration of TBC-CNTs was determined 0.2 wt% that contributed to 30.6 % of friction reduction and 28.3 % of wear resistance, respectively, at 0.6 m/s and 8 N. The tiny structure of TBC-CNTs contributed to their entrance into the contact interface and playing lubricating roles. Furtherly, the increase of water film thickness within contacts and formation of lubrication film on rubbing surfaces caused by TBC-CNTs addition resulted in the friction and wear reduction.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Overview of automotive engine friction and reduction trends-effects of surface, material, and lubricant-additive technologies10.1007/s40544-016-0107-9 ↗
2. Influence of tribology on global energy consumption, costs, and emissions10.1007/s40544-017-0183-5 ↗
3. Review of two-dimensional nanomaterials in tribology: recent developments, challenges, and prospects10.1016/j.cis.2023.103004 ↗
4. Investigation on the failure mechanism and safety mechanical-thermal boundary of a multi-disc clutch10.1016/j.engfailanal.2019.04.071 ↗
5. Graphene-family lubricant additives: recent developments and future perspectives10.3390/lubricants10090215 ↗
6. Numerical and experimental studies on performance enhancement of journal bearings using nanoparticles based lubricants10.1007/s11831-021-09538-1 ↗
7. Hexagonal boron nitride nanosheets eco-friendly dispersed in pure water for lubrication in fretting contacts between steel pairs
8. Tribological behavior of PTFE sliding against steel in sea water10.1016/j.wear.2009.06.015 ↗
9. Preparation and tribological properties of dual-coated CuO as lubricant additives
10. A study of the tribological behaviour of TiO2 nano-additive10.1016/j.triboint.2017.01.013 ↗
11. Improvement of tribological properties of ZnO lubricant for zirconium alloy cold rolling by hydroxyethyl cellulose10.1002/ls.1653 ↗
12. PEI-RGO nanosheets as a nanoadditive for enhancing the tribological properties of water-based lubricants10.1016/j.triboint.2019.105851 ↗
13. A green modification technology of carbon nanotubes toward enhancing the tribological properties of aqueous-based lubricants10.1016/j.triboint.2023.108268 ↗
14. Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition10.1016/j.compscitech.2008.12.004 ↗
15. Covalently attached strategy to modulate surface of carbon quantum dots: towards effectively multifunctional lubricant additives in polar and apolar base fluids10.1016/j.triboint.2019.03.045 ↗
16. Friction of low-dimensional nanomaterial systems10.1007/s40544-014-0064-0 ↗
17. Strategies for improving friction behavior based on carbon nanotube additive materials10.1016/j.triboint.2022.107875 ↗
18. Frictional reduction with partially exfoliated multi-walled carbon nanotubes as water-based lubricant additives10.1166/jnn.2018.14694 ↗
19. Towards the superlubricity of polymer-steel interfaces with ionic liquids and carbon nanotubes
20. Surface modification methods and mechanisms in carbon nanotubes dispersion10.1016/j.carbon.2023.118133 ↗
21. Urea modified fluorinated carbon nanotubes: unique self-dispersed characteristic in water and high tribological performance as water-based lubricant additives10.1039/C9NJ03099A ↗
22. Study on the tribological properties of Fe3O4@CNTs nanofluids acting on the textured ceramics10.1007/s00339-022-05305-6 ↗
23. Solution properties of single-walled carbon nanotubes10.1126/science.282.5386.95 ↗
24. Fullerene pipes10.1126/science.280.5367.1253 ↗
25. Remarkable lubricity of CNTs microspheres as additives in oil lubricant for ceramic components10.1016/j.ceramint.2023.10.230 ↗
26. Improving reinforcement properties of CNTs in aluminium matrix composites: a case of surface modification through AlN nano-particle grafting
27. Doped polyaniline/multi-walled carbon nanotube composites: preparation, characterization, and properties10.1016/j.polymer.2006.03.060 ↗
28. Carbon nanotubes synthesis using carbonization of pretreated rice straw through chemical vapor deposition of camphor10.1039/C7RA04882C ↗
29. Purification of carbon nanotubes produced by the electric arc-discharge method
30. Carbon nanotube-reinforced aluminum composite produced by induction melting
31. Enhancing the wettability and interface bonding in carbon nanotubes reinforced 2A70 alloy by the coating of ZrO210.1016/j.diamond.2022.109314 ↗
32. Significant decrease of electrical resistivity by carbon nanotube networks in copper-MWCNTs nanocomposites: a detailed microstructure study10.1016/j.diamond.2020.108083 ↗
33. Surface modification of multiwall carbon nanotubes by sulfonitric treatment10.1016/j.apsusc.2016.04.065 ↗
34. The effects of particle characteristics on threebody abrasive wear10.1016/S0043-1648(01)00557-9 ↗
35. In situ film-forming and friction-reduction mechanisms for carbon-nanotube dispersions in lubrication10.1007/s11249-012-0006-9 ↗
36. Heat transfer analysis in carbon nanotube-water between rotating disks under thermal radiation conditions10.1016/j.molliq.2017.05.085 ↗
37. Dry friction and wear of self-lubricating carbon-nanotube-containing surfaces10.1016/j.wear.2018.03.021 ↗
38. Size effect in determining the water diffusion rate in carbon nanotubes10.1016/j.molliq.2021.116034 ↗