journal article·2004-02

On the tribological behaviour of mechanical seal face materials in dry line contact

G.A. Jones

Wear· Volume 256· Issue 3-4
Publisher page

Abstract

The evolving tribological demands of mechanical face sealing applications such as those associated with high-duty fluid seals and gas sealing technology are driving the need for the development of new and novel seal face material solutions. Under conditions where the combination of high pressure and high surface speeds create high levels of PV the seal designer will specify two hard faces, typically a combination of reaction bonded silicon carbide, alpha sintered silicon carbide or tungsten carbide. Work has been carried out here aimed at evaluating and increasing the understanding of the tribological nature of these hard face combinations and evaluating the potential of polycrystalline diamond (PCD) and diamond-like carbon (DLC) films. Experimentation has shown that under dry moderate contact conditions mild deformation-controlled wear takes place with a polishing of the contact surfaces. Progressively increasing the contact pressure was shown to eventually produce a transition to severe microcrack-controlled wear. Coating one of the contact surfaces with a PCD or DLC film modified the contact dynamics producing low friction coefficients and in the case of the PCD film shifted the wear transition to a much higher contact severity. A linear elastic contact model is developed that provides a framework for rationalising the results of this work and enables the key features of mechanical face seal design to be related to the critical tribological characteristics of the seal face material systems.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. G.A. Jones, The tribology of the mechanical sealing interface: an evaluation of the role and potential of surface engineering, Ph.D. Thesis, University of Salford, 1999.
2. Explicit equations for the stress beneath a sliding spherical contact
3. The stress field created by a circular sliding contact10.1115/1.3625051 ↗
4. K.L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge, 1985.10.1017/CBO9781139171731 ↗
5. The interface crack with friction in the contact zone10.1115/1.3424179 ↗
6. The interface crack10.1115/1.3424148 ↗
7. The interface crack in a combined tension–compression and shear field10.1115/1.3424553 ↗
8. Elastic fracture mechanics concepts for interfacial cracks10.1115/1.3173668 ↗
9. R. Rezakhanlou, J. Von Stebut, Damage mechanisms of hard coatings on hard substrates: a critical analysis of failure in scratch and wear testing, in: D. Dowson, C.M. Taylor, M. Godet (Eds.), Mechanics of Coatings, Elsevier, New York, 1990, pp. 183–192.10.1016/S0167-8922(08)70255-4 ↗
10. Effects of interface decohesion and skidding on bimaterial crack tip fields10.1007/BF00018381 ↗
11. Cracks on bimaterial interfaces: elasticity and plasticity aspects10.1016/0921-5093(91)90727-5 ↗
12. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
13. An analysis of fracture and delamination in thin coatings subjected to contact loading10.1016/0043-1648(95)06885-6 ↗
14. Fracture toughness of alumina–niobium interfaces. Experiments and analyses10.1080/01418619208248005 ↗
15. Experimental determination of interfacial toughness using Brazil-nut-sandwich10.1016/0956-7151(90)90200-Z ↗
16. Tribological characteristics of synthesised diamond films on silicon carbide10.1016/0043-1648(89)90114-2 ↗
17. K. Miyoshi, R.L.C. Wu, A. Garscadden, P.N. Barnes, H.E. Jackson, Friction and wear of plasma deposited diamond films, in: Proceedings of the International Conference and Meeting on Coatings and Thin Films, NASA Technical Memorandum 105926, San Diego, CA, 1993.10.1063/1.354386 ↗
18. The friction of clean crystal surfaces10.1098/rspa.1966.0237 ↗
19. T.M. Dugger, D.E. Peebles, L.E. Pope, in: Y.-W. Chung, A.M. Homola, G.B. Street (Eds.), Surface Science Investigations in Tribology: Experimental Approaches, ACS Symposium Series No. 485, ACS Books, Washington, DC, 1992, pp. 72–102.
20. Friction of diamond, graphite and carbon and the influences of surface films10.1098/rspa.1951.0173 ↗
21. D. Tabor, in: J.E. Field (Ed.), The Properties of Diamond, Academic Press, London, 1979, Chapter 10, pp. 325–350.
22. J. Wilks, E.M. Wilks, in: J.E. Field (Ed.), The Properties of Diamond, Academic Press, London, 1979, Chapter 12, pp. 351–382.