journal article·2009-03

Novel polytetrafluoroethylene (PTFE) composites with newly developed Tribaloy alloy additive for sliding bearings

Alireza Khoddamzadeh, Rong Liu, Xijia Wu

Wear· Volume 266· Issue 7-8
Publisher page

Abstract

A group of novel polytetrafluoroethylene (PTFE)-based composite materials are developed for sliding bearing applications. The reinforcements include the newly developed T-401 Tribaloy alloy, which possesses better ductility compared to conventional Tribaloy alloys, spherical bronze particles, chopped carbon fibers and milled graphite. The specimens are fabricated with the compression moulding technique under different preforming and sintering cycles. The mechanical and tribological properties as well as corrosion resistance of the new composites are investigated. It is demonstrated that these properties are influenced by the type of fillers and the content level of fillers. The wear resistances of all the developed PTFE composites are much higher than that of pure PTFE with very low coefficients of friction. Among the developed composites, the mixture of 40% PTFE + 15% T-401 + 45% bronze exhibits the best combination of properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. ASM Handbook Committee, Friction, Lubrication, and Wear Technology, vol. 18, ASM International, USA, 1992.
2. Ai · 2001 · vols. I & II
3. Nica · 1985
4. Plain bearing materials
5. Neale · 2001
6. Harris · 2007
7. Effect of rare earths on mechanical and tribological properties of carbon fibers reinforced PTFE composite10.1007/s11249-006-9033-8 ↗
8. The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene10.1016/S0043-1648(01)00816-X ↗
9. Friction and wear characteristics of PTFE composites filled with metal oxides under lubrication by oil”10.1002/(SICI)1097-4628(19971003)66:1<85::AID-APP10>3.0.CO;2-6 ↗
10. Sliding wear behavior of PTFE composites10.1016/S0043-1648(01)00859-6 ↗
11. The role of filler geometrical shape in wear and friction of filled PTFE10.1016/0043-1648(62)90076-5 ↗
12. The effect of carbon aspect ratio on the friction and wear of PTFE10.1016/0043-1648(77)90171-5 ↗
13. Effect of various fillers on the friction and wear of polytetrafluoroethylene-based composites10.1016/0043-1648(82)90170-3 ↗
14. Davis · 2000
15. Betteridge · 1982
16. Structure and hardness of Co–Mo–Cr–Si wear resistant alloys (Tribaloys)10.1179/030634584790253146 ↗
17. Tribaloy intermetallic materials: new wear- and corrosion-resistant alloys10.1108/eb010165 ↗
18. New materials resistant to wear and corrosion to 1000°C10.1016/0043-1648(75)90316-6 ↗
19. The effect of iron additions on the microstructure and properties of the Tribaloy Co–Mo–Cr–Si wear resistant alloys10.1007/BF00555273 ↗
20. A newly developed Tribaloy alloy with increased ductility10.1016/j.scriptamat.2005.08.033 ↗
21. Mechanical and tribological properties of newly developed Tribaloy alloys10.1016/j.msea.2006.10.088 ↗
22. Investigation of mechanical behavior of cobalt-based intermetallic materials using a nano-indentation technique
23. Microstructural characteristics and corrosion resistance in molten Zn–Al bath of Co–Mo–Cr–Si alloys10.1016/j.msea.2005.07.054 ↗
24. ASM Handbook Committee, Metallography and Microstructures, vol. 9, ASM International, USA, 2004.
25. ASTM Standard Committee, G 99-05, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, USA, 2005.
26. ASTM Standard Committee, D 4894-04, Standard Specification for PTFE Granular Molding and Ram Extrusion Materials, ASTM International, USA, 2004.
27. ASTM Standard Committee, D 4745-06, Standard Specification for Filled Compounds of PTFE Molding and Extrusion Materials, ASTM International, USA, 2007.
28. ASTM Standard Committee, D 1708-06a, Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens, ASTM International, USA, 2006.
29. ASTM Standard Committee, D 638M-93, Standard Test Method for Tensile Properties of Plastics (Metric), ASTM International, USA, 1993.
30. ASTM Standard Committee, G 1-03, Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, ASTM International, USA, 2007.
31. Sliding wear mechanism of polytetrafluoroethylene (PTFE) and PTFE composites10.1016/0043-1648(92)90271-9 ↗
32. ASM Handbook Committee, Corrosion: Fundamentals, Testing and Protection, vol. 13A, ASM International, USA, 2003.
33. ASM Handbook Committee, Corrosion: Materials, ASM International, vol. 13B, USA, 2005.