Seizure and wear rate testing of wheel–rail contacts under lubricated conditions using pin-on-disc methodology
Source abstract
Abstract
An increased wear rate and a shift of wear mechanism in the wheel–rail contact has been observed in tight curves, mainly due to the change from an almost pure rolling contact to more of a sliding contact. The wheel flange–rail gauge contact is commonly known to experience the toughest conditions of the overall wheel–rail contact in terms of contact pressure and sliding velocity. The wheel flange–rail gauge contact is preferably lubricated to reduce the wear rate and to minimise the risk of transition to severe wear or seizure. The amount and type of lubrication are therefore important parameters if one is to control the wear rate. In this study, a flange contact is experimentally simulated using pin-on-disc testing, to determine the difference in wear rate among a selection of lubricants under different contact conditions. The selection of lubricants consisted of environmentally adapted oils, mineral oils, and greases containing different amounts of EP and AW additives. The results of the pin-on-disc testing indicate that both the amount and type of lubrication applied is decisive for the wear rate and active wear mechanism. Tests have also been performed to simulate either on-board or wayside lubrication, by applying the lubricant at different intervals. A general observation is that under starved lubrication conditions a transition to severe wear is initiated and the wear rate increases rapidly, i.e., all tests indicate that the contact between wheel and rail must be lubricated to avoid high wear rates.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. U. Olofsson, R. Lewis, Tribology of the wheel–rail contact, in: A Handbook of Railway Vehicle Dynamics, S. Iwnicki, Swets & Zeitlinger Publishers.
2. Wear, friction and plastic deformation of two rail steels—full scale test and laboratory study10.1016/S0043-1648(02)00291-0 ↗
3. Surface cracks and wear of rail: a full scale test and laboratory study10.1243/095440902321029208 ↗
4. T. Jendel, Prediction of Wheel Profile Wear—Methodology and Verification, Licentiate Thesis, Royal Institute of Technology (KTH), Vehicle Engineering, Stockholm, Sweden, 2000.
5. Mapping rail wear regimes and transitions10.1016/j.wear.2004.03.019 ↗
6. Laboratory assessment of lubricants for wheel/rail
7. Laboratory assessment of lubricants for wheel/rail lubrication
8. Energy and wear analysis in lubricated sliding contact10.1016/0043-1648(95)06731-0 ↗
9. P. Waara, Wear Reduction Performance of Rail Flange Lubrication, Licentiate Thesis, LTU, Mechanical Engineering, 2000.
10. Lubricant influence on flange wear in sharp railroad curves10.1108/00368790110393910 ↗
11. Influence of leaf, humidity, and applied lubrication on friction in the wheel–rail contact: pin-on-disc experiments10.1243/0954409042389364 ↗
12. R. Nilsson, Wheel/rail Wear and Surface Cracks, Licentiate Thesis, TRITA-MMK, Department of Machine Design, Royal Institute of Technology (KTH), Stockholm, 2003.
13. Thomas · 1999
14. J.A. Elkins, R.P. Reiff, P.E. Rhine, Measurement of Lubrication Effectiveness, ASME Paper 84-WA/R Presented at ASME 1984 Winter Annual Meeting, New Orleans, LA.
15. Investigation of wheel flange wear on the Santander FEVE Rail—a case study10.1016/0043-1648(93)90106-V ↗
16. Seizure mechanisms of wheel–rail contacts under lubricated conditions using a transient ball-on-disc method
17. J. Rieglert, E. Kassfeldt, Performance of environmentally adapted hydraulic fluids at boundary lubrication, in: Proceedings of the 23rd Leeds–Lyon Symposium on Tribology, 1996, Amsterdam, Elsevier, 1997 53(1) 39–43.10.1016/S0167-8922(08)70474-7 ↗
18. Surface analysis of boundary lubricated spherical roller thrust bearings10.1016/S0043-1648(97)00259-7 ↗