journal article·2005-07

Determination of wear coefficients for erosive wear prediction through Coriolis wear testing

Harry H. Tian, Graeme R. Addie, Krishnan V. Pagalthivarthi

Wear· Volume 259· Issue 1-6
Publisher page

Abstract

In simulation of erosive wear on wet-end components (i.e. casing, impeller and liners) of centrifugal slurry pumps using numerical models, the determination of wear coefficients is critical to achieve reasonable and consistent accuracy on wear life prediction. In the present research, work relevant to the Coriolis wear tester is briefly reviewed. Through Coriolis wear testing and analysis, wear coefficients (or specific energy coefficients) have been determined for different slurry conditions over a large range of particle sizes. Several types of wear resistant white iron alloys including that specified in ASTM G75 were selected as target materials in this study. Considering the fact that many wear models assumed mono particle size, slurries with wide, narrow and semi-narrow banded (D50/D85 size) solids particles were used during the Coriolis wear tests to investigate the impact of particle distribution on wear coefficients. The test results obtained showed that the wear rates (and so the wear coefficients) of all tested materials increase rapidly over a broad particle size range. Beside particle sizes, other particle properties such as particle shape and size distribution also exhibited significant effect on the values of wear coefficients. Silica sand and copper ore slurries were used as examples. Within the examined target materials, the wear coefficients and wear resistance had relatively strong correlation with the hardness of the materials. Correlation deviations have also been explained from the viewpoint of material microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Test approach for dense slurry erosion
2. Erosion of concentrated slurries in turbulent flow
3. Numerical method to predict wear distribution in slurry pipelines
4. Prediction of dredge pump shell wear
5. Slurry erosion tests with centrifugal erosion tester
6. Applications of materials wear testing to solids transport via centrifugal slurry pumps
7. J.J. Tuzson, H.Mcl. Clark, The slurry erosion process in the Coriolis wear tester, in: Proceedings of the FEDSM’ 98, ASME Fluids Eng. Division Summer Meeting, June 21–25, 1998, Washington, DC, Paper no. FEDSM98-5144.
8. Modelling slurry particle dynamics in the Coriolis erosion tester10.1016/S0043-1648(99)00016-2 ↗
9. Wear rates and specific energies of some ceramic, cermet and metallic coatings determined by the Coriolis weartestes10.1016/S0043-1648(99)00213-6 ↗
10. Measurements of specific energies for erosive wear using Coriolis erosion tester10.1016/S0043-1648(00)00327-6 ↗
11. Forces on particles entrained in turbulent flow through rotating channel
12. K.V. Pagalthivarthi, V.R. Ramanathan, Finite element study of two-phase free surface flow in rotating channels, in: Proceedings of the Fifth International Conference on Multiphase Flows, May 27–June 1, 2004, Tokyo, Japan, Paper No. 294, 2004.
13. V. Ramanathan, Prediction of two-phase free surface flow in rotating channels, Ph.D. thesis, Indian Institute of Technology, New Delhi, India, 2001.
14. Mathematical modeling of two-phase flow10.1146/annurev.fl.15.010183.001401 ↗
15. H.F. Fishmeister, Development and present status and technology of hard materials, in: R.K. Viswanadham, et al. (Eds.), Proceedings of International Conference on the Science of Hard Materials, August 21–28, 1981, Jackson, Wyoming, Plenum Press, New York, 1983, pp. 1–42.10.1007/978-1-4684-4319-6_1 ↗
16. Gensamer · Trans. ASM · 1942 · 30 · 983
17. H.H. Tian, G.R. Addie, Experimental study on erosive wear of some metallic materials using coriolis wear testing approach, ICEAW-II Conference, 2003, Cambridge, UK, Paper ICEAW-68, Wear 258 (2005) 458–469.10.1016/j.wear.2004.09.002 ↗
18. Corrosion-wear behaviors of some high alloyed white irons and stainless steels
19. Mechanical properties and features of erosion of cermets10.1016/S0043-1648(01)00737-2 ↗
20. Erosion behavior of ductile materials with a spherical, non-friable erodent10.1016/0043-1648(86)90190-0 ↗
21. The erosion–corrosion resistance of tungsten- carbide hard metal10.1016/S0263-4368(96)00016-9 ↗
22. Particulate motion and concentration fields in centrifugal slurry pumps10.1080/02726359008906557 ↗
23. G.R. Addie, K.V. Pagalthivarthi, R.J. Visintainer, Centrifugal slurry pump wear, technology and field experience, ASME-FED, vol. 236, Summer Meeting, 1996, San Diego, pp. 703–715.
24. PIV and finite element comparisons of particles inside a slurry pump casing