journal article·2010-02

Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques

Abhishek Chatterjee, Andreas A. Polycarpou, John R. Abelson, Pascal Bellon

Wear· Volume 268· Issue 5-6
Publisher page

Abstract

Abstract The response of HfB 2 films to nanoindentation and nanoscratch was studied using both experimental and the finite element techniques. The material properties of HfB 2 (elastic modulus, yield strength and Poisson's ratio) were derived by curve-fitting the simulated load–displacement ( F – d ) nanoindentation data with the experimental F – d data using a parametric analysis. Experimental results pertaining to both in situ and residual displacements were in good agreement with corresponding finite element results. As-deposited HfB 2 films show significant plastic deformation, especially under high contact pressures (22.5 GPa), resulting in pile-up around the scratch area while annealed HfB 2 shows appreciable elastic recovery. Annealing improves the propensity of the material to resist crack propagation (Mode 1) after scratch since annealed HfB 2 shows appreciable reduction of residual tensile stresses as well as significant increase in residual compressive stresses compared to as-deposited HfB 2 . However, no such improvement is expected during scratch since in situ stresses do not differ significantly between as-deposited and annealed HfB 2 . The approach proposed and applied in this work to HfB 2 films, is general and can readily be applied to other thin film materials. The proposed finite element model of nanoscratch could be valuable in predicting thin solid film performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Nanomechanical property and nanowear measurements for sub-10-nm thick films in magnetic storage10.1007/s11340-006-9393-x ↗
2. Bhushan · 1999
3. Cross-sectional nanoindentation for copper adhesion characterization in blanket and patterned interconnect structures: experiments and three-dimensional FEM modeling10.1007/s10704-007-9072-7 ↗
4. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
5. Analysis of nanoindentation load–displacement loading curves10.1557/JMR.1996.0250 ↗
6. Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrates10.1016/0020-7683(88)90091-1 ↗
7. Tip-radius effect in finite element modeling of sub-50nm shallow nanoindentation10.1016/j.tsf.2003.10.033 ↗
8. Indentation analysis of elastic–plastic homogeneous and layered media: criteria for determining the real material hardness10.1115/1.1572515 ↗
9. Effect on PVD coated cemented carbide inserts cutting performance of micro-blasting and lapping of their substrates10.1016/j.surfcoat.2005.02.119 ↗
10. Limits of using bilinear stress–strain curve for finite element modeling of nanoindentation response on bulk materials10.1016/S0040-6090(00)01559-5 ↗
11. Finite-element modeling of nanoindentation10.1063/1.369178 ↗
12. Review of the tribology of diamond-like carbon10.1016/0043-1648(93)90210-D ↗
13. The stress field created by a circular sliding contact10.1115/1.3625051 ↗
14. Finite element analysis of an elastic–plastic two-layer half-space: sliding contact10.1016/0043-1648(91)90289-7 ↗
15. HfB2 and Hf–B–N hard coatings by chemical vapor deposition10.1016/j.surfcoat.2005.11.040 ↗
16. Tribological behavior of hafnium diboride thin films10.1016/j.surfcoat.2006.08.086 ↗
17. Nanoscratch and nanofriction behavior of hafnium diboride thin films10.1016/j.wear.2008.02.002 ↗
18. Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrates10.1016/0020-7683(88)90091-1 ↗
19. Williams · 2005
20. Rhodes · 1970
21. Elastic–plastic finite element analysis of repeated indentation of a half-space by a rigid sphere10.1115/1.2900991 ↗
22. S. Jayaraman, Chemical vapor deposition of transition metal diborides from borohydride precursors, Doctoral Thesis, FILM 2005 J334, University of Illinois at Urbana-Champaign, Urbana, USA, 2005.
23. The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal10.1080/1478643031000118012 ↗
24. A model of the mechanics of serrated flow in an amorphous alloy10.1016/0001-6160(83)90100-1 ↗
25. A numerical investigation of the mechanical behavior of nanocrystalline copper
26. Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique10.1016/S0921-5093(98)00661-3 ↗