Impact stress absorption and load spreading in multi-layered erosion-resistant coatings
Source abstract
Abstract
The development of high performance erosion-resistant coatings requires understanding of stress propagation upon particle impact. In this work, we apply finite element methodology to enhance and optimize the resistance of protective coatings to erosion by solid particles with appropriate stress management. Controlled distribution of the initial residual stress in the coating was used to counteract impact stress, while Young's modulus distribution was applied to optimize impact energy spreading throughout the coating system. Considering both tensile stress reduction and energy absorption, a multi-layer configuration with specific Young's modulus and residual stress distributions along the coating depth is suggested as an optimal coating architecture. Guidelines and design principles for erosion-resistant coating systems are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. FE modelling of surface stresses in erosion-resistant coatings under single particle impact10.1016/j.wear.2006.04.009 ↗
2. Modelling of single-particle impact response of erosion-resistant coatings
3. Erosion testing of coatings for aero engine compressor components10.1023/A:1008644527599 ↗
4. V. Shanov, W. Tabakoff, M. Metwally, Erosive wear of CVD ceramic coatings exposed to particulate flow, Report of Investigations—United States, Bureau of Mines, pp. 25–31, 1992.10.1016/B978-0-444-89900-2.50011-7 ↗
5. Multilayered coatings with alternate pure Ti and TiN/CrN superlattice10.1016/j.surfcoat.2003.09.033 ↗
6. Design of hard coating architecture for the optimization of erosion resistance10.1016/j.wear.2008.01.021 ↗
7. Dynamic solid particle damage in brittle materials: an appraisal10.1007/BF00738475 ↗
8. Effect of material parameters on the erosion resistance of brittle materials10.1007/BF00745575 ↗
9. Problems of simulation and perfecting of the material resistance to erosion Izvestiya Akademii Nauk
10. Surface damage under dynamic loading10.1016/0301-679X(95)00062-9 ↗
11. Characterization of energy dissipation phenomenon in abrasive waterjet cutting
12. Erosion by solid particles of W/W-N multilayer coatings obtained by PVD process10.1016/S0257-8972(98)00838-X ↗
13. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
14. High thickness Ti/TiN multilayer thin coatings for wear resistant applications10.1016/j.surfcoat.2006.03.042 ↗
15. Multilayer effect in abrasion—optimizing the combination of hard and tough phases10.1016/S0257-8972(99)00151-6 ↗
16. Super- and ultrahard nanacomposite coatings: generic concept for their preparation, properties and industrial applications10.1016/S0042-207X(02)00229-4 ↗
17. Relationship between the mechanical properties and the microstructure of nanocomposite TiN/SiN1.3 coatings prepared by low temperature plasma enhanced chemical vapor deposition10.1016/S0040-6090(03)00028-2 ↗
18. One-dimensional model for designing functionally graded materials to manage stress waves10.1016/S0020-7683(99)00236-X ↗
19. Impact load spreading in layered materials and structures: concept and quantitative measure10.1016/S0734-743X(01)00051-3 ↗
20. Load spreading and penetration resistance of layered structures—a numerical study10.1016/j.ijimpeng.2003.08.001 ↗
21. K. Hibbitt, Sorensen Inc., ABAQUS, 6.5 ed., 2004.
22. G.M. Pharr, W.C. Oliver, Measurement of thin film mechanical properties using nanoindentation, MRS Bulletin, vol. 17, pp. 28, 1992.10.1557/S0883769400041634 ↗
23. Residual stress development in UMS TiN coatings10.1016/j.surfcoat.2005.08.049 ↗
24. Microstructure and mechanical properties of Cr–Si–N coatings prepared by pulsed reactive dual magnetron sputtering10.1016/j.surfcoat.2008.02.014 ↗