Erosion–corrosion behavior of cold-spray nanostructured Ni–20Cr coatings in actual boiler environment
Source abstract
Abstract
Abstract In the current investigation erosion–corrosion (E–C) behavior of cold-spray nanostructured Ni–20Cr coatings on SAE-213-T22 and SA 516-Grade 70 steels, under actual boiler environment was evaluated. A nanostructured Ni–20Cr powder was synthesized using a ball milling technique by the investigators. The specimens with and without coating were exposed to super heating zone of a power plant boiler at 750 °C under cyclic conditions for 15 cycles. Each cycle consisted of 100 h of heating followed by 1 h of cooling. The mass change and thickness loss data of the samples were used to study the kinetics of E–C. XRD, SEM/EDS, and X-ray mappings analyses were used to characterize the eroded–corroded samples. The coating was found to reduce the E–C rate of T22 and SA 516 steels by 100% in terms of thickness loss. Moreover, the investigated nanostructured Ni–20Cr coating was found to be more effective to reduce the E–C rates of the steels in comparison with its conventional micron-size counterpart. Erosion–corrosion resistance shown by the investigated coating under actual boiler conditions may be attributed to the presence of protective NiO and Cr 2 O 3 phases in its oxide scale and its superior as-sprayed microhardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. G.H. Koch, M.P.H. Brongers, N.G. Thompson, Y.P. Virmani, J.H. Payer, Corrosion costs and preventive strategies in the United States, in: G.H. Koch (Ed.), Historic Congressional Study, Supplement to Mater. Perfor., 2002, pp. 1–11.
2. Erosion wear and mechanical properties of plasma-sprayed nickel and iron-based coatings subjected to service conditions in boilers10.1016/S0301-679X(97)00029-7 ↗
3. Current limitations of high-temperature alloys in practical applications10.1007/BF01046730 ↗
4. Environmental degradation of boiler components
5. Fireside issues in advanced power generation systems10.1179/174892408X373509 ↗
6. Degradation of heat exchanger materials under biomass co-firing conditions10.3184/096034007X281640 ↗
7. McCune · 1995
8. Chemical vapor deposition of coatings10.1016/S0079-6425(01)00009-3 ↗
9. Health hazards of electroplating10.1097/00043764-196507000-00008 ↗
10. Evidence for aerosol ionic redistribution within aerosols produced by chrome electroplating10.1021/es00082a012 ↗
11. A review of uses, environmental hazards and recovery/recycle technologies of perfluorocarbons (PFCs) emissions from the semiconductor manufacturing processes10.1016/S0950-4230(01)00067-5 ↗
12. Pawlowski · 2008
13. Papyrin · 2006
14. J. Karthikeyan, Cold Spray Technology, in: J. Karthikeyan (Ed.), International status and USA efforts, 2004.
15. Microstructural characteristics of cold-sprayed nanostructured WC–Co coatings10.1016/S0040-6090(02)00631-4 ↗
16. The potential for nanostructured materials in gas turbine engines10.1016/0965-9773(95)00230-8 ↗
17. Nanostructured materials: basic concepts and microstructure10.1016/S1359-6454(99)00285-2 ↗
18. G. Cao, Nanostructures and nanomaterials, in: Mark Reed (Ed.), Synthesis, Properties and Applications, Imperial College Press, Singapore, 2004.10.1142/9781860945960 ↗
19. C.C. Koch, Nanostructured materials, in: C.C. Koch (Ed.), Processing, Properties, and Applications, William Andrew Publishing, Norwich, NY, USA, 2007.
20. Nanostructured materials—mind over matter10.1016/0965-9773(93)90058-J ↗
21. Review nanostructured coatings10.1016/S0921-5093(01)01986-4 ↗
22. Thermal spraying of nanostructured cermet coatings10.1016/S0924-0136(01)00798-1 ↗
23. Synthesis and mechanical behavior of nanostructured materials via cryomilling10.1016/j.pmatsci.2005.04.004 ↗
24. Nanocrystalline materials10.1179/imr.1995.40.2.41 ↗
25. Phase fields of nickel silicides obtained by mechanical alloying in the nanocrystalline state10.1063/1.373553 ↗
26. High strength nanocrystalline L12–Al3 (Ti,Zr) intermetallic synthesized by mechanical alloying10.1016/j.intermet.2006.02.003 ↗
27. Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying10.1016/j.msea.2009.09.019 ↗
28. Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying10.1007/BF02744629 ↗
29. Nanocrystalline Ni coatings strengthened with ultrafine particles10.1007/s11661-003-0101-5 ↗
30. Zhao · Mater. Chem. Phys. · 2005 · 90 · 27510.1016/j.matchemphys.2004.04.006 ↗
31. Matthews · 2004
32. Oxidation behaviour of NiCrAlY coatings on Ni-based superalloy10.1016/S0257-8972(01)01427-X ↗
33. Principles of growth and adhesion of oxide scales
34. Fire side erosion–corrosion protection of boiler tubes by nanostructured coatings
35. High temperature oxidation behavior of a novel cold-spray Ni–20Cr coating on boiler steels10.1016/j.apsusc.2014.12.033 ↗
36. Study of oxidation behavior of HVOF sprayed nanostructured Ni–20Cr coating on SA 516 boiler steel
37. Synthesis and deposition of Ni–20Cr powder using cold spraying10.1179/1743294413Y.0000000133 ↗
38. Production of nano-crystalline Ni–20Cr coatings for high-temperature applications10.1007/s11666-014-0055-8 ↗
39. Takadoum · 2008
40. Investigations on the behavior of HVOF and cold sprayed Ni–20Cr coating on T22 boiler steel in actual boiler environment10.1007/s11666-011-9698-x ↗
41. Bala · 2010
42. Studies on the transient stage of oxidation of VPS and HVOF sprayed MCrAlY coatings10.1016/S0257-8972(99)00332-1 ↗
43. Diverse Scaling Behavior of the Ni–20Cr Alloy10.1016/S0254-0584(02)00448-0 ↗
44. Steam oxidation resistance of Ni–Cr thermal spray coatings on 9Cr–1Mo steel. Part 2: 50Ni–50Cr10.2355/isijinternational.43.104 ↗