Anisotropic wear behavior of human enamel at the rod level in terms of nanoscratching
Source abstract
Abstract
Abstract In-situ nanoscratch experiments were carried out on occlusal surface and axial section (on which axis is perpendicular to rods and axis parallels to rods, respectively) of human enamel using a sphero-conical indenter (∼1 μm tip radius) at different normal loads. The elastic recovery and inelastic deformation during scratching process was evaluated in terms of three curves along the track: surface roughness, scratch depth, and post depth. Coefficient of friction (COF) and wear rate was addressed for the single rod. Results reveal that the amount of elastic recovery and inelastic deformation of a single rod on the axial section is more than that on the occlusal surface. At the enamel rod scale, COF depends on loads and locations. The wear resistance of a single rod on the occlusal surface is greater than that at direction of axis perpendicular to rods and axis parallel to rods. The load-dependence is attributed to the ploughing and pile-up. The location-dependence is ascribed to the angle change of normal loading direction, hydroxyapatite crystals orientation and the scratching direction. In addition, viscoelastic protein layers between the apatite crystals play an important role in the anisotropic wear behavior at microscale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Nanoindentation and storage of teeth10.1016/S0021-9290(02)00039-8 ↗
2. Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics10.1016/j.jmbbm.2007.05.001 ↗
3. Mechanical properties of human dental enamel on the nanometre scale10.1016/S0003-9969(00)00089-3 ↗
4. Indentation damage and mechanical properties of human enamel and dentine10.1177/00220345980770030601 ↗
5. On the critical parameters that regulate the deformation behaviour of tooth enamel10.1016/j.biomaterials.2008.02.022 ↗
6. Effect of microstructure upon elastic behaviour of human tooth enamel10.1016/j.jbiomech.2009.02.004 ↗
7. The fracture behaviour of dental enamel10.1016/j.biomaterials.2009.09.050 ↗
8. Study of in vitro wear of human tooth enamel10.1007/s11249-006-9192-7 ↗
9. On the friction and wear behaviour of human tooth enamel and dentin10.1016/S0043-1648(03)00079-6 ↗
10. Tribological behaviour of human enamel in red wine and apple juice environments10.1016/j.wear.2006.05.010 ↗
11. Investigation on the microtribological behaviour of human tooth enamel by nanoscratch10.1016/j.wear.2010.11.020 ↗
12. Wear behavior of early carious enamel before and after remineralization10.1016/j.wear.2008.11.018 ↗
13. Nano-scale sliding contact deformation behaviour of enamel under wet and dry conditions10.1007/s10856-010-3988-6 ↗
14. Enamel: from brittle to ductile like tribological response10.1016/j.jdent.2008.05.011 ↗
15. Wear behaviour of dental enamel at the nanoscale with a sharp and blunt indenter tip10.1016/j.wear.2008.05.007 ↗
16. Nanotribological behaviour of tooth enamel rod affected by bleaching treatment10.1016/j.wear.2011.01.059 ↗
17. Human enamel rod presents anisotropic nanotribological properties10.1016/j.jmbbm.2010.12.002 ↗
18. Nanotribological characterization of tooth enamel rod affected by surface treatment10.1016/j.jbiomech.2009.06.057 ↗
19. Wear of human teeth: a tribological perspective10.1243/1350650053295394 ↗
20. Nanotribology studies of Cr, Cr2N and CrN thin films using constant and ramped load nanoscratch techniques10.1016/S0257-8972(01)01403-7 ↗
21. Nanoscratch studies of uncoated and coated ceramic matrix composite materials10.1111/j.1551-2916.2006.01095.x ↗
22. Nanoscratch behavior of carbon nanotube reinforced aluminum coatings10.1016/j.tsf.2009.11.079 ↗
23. Elastic modulus and stress-strain response of human enamel by nano-indentation10.1016/j.biomaterials.2006.03.045 ↗
24. A three-dimensional finite element model of prismatic enamel—a reappraisal of the data on the Young's modulus of enamel10.1177/00220345970760101101 ↗
25. Effects of normal load on nanotribological properties of sputtered carbon nitride films10.1016/j.diamond.2004.07.022 ↗
26. Effects of film thickness and contact load on nanotribological properties of sputtered amorphous carbon thin films10.1016/S0043-1648(03)00307-7 ↗
27. A theory of friction and wear during the abrasion of metals10.1016/0043-1648(62)90235-1 ↗
28. Analysis of the apparent friction of polymeric surfaces10.1007/s10853-006-0710-7 ↗
29. Biomolecular origin of the rate-dependent deformation of prismatic enamel10.1063/1.2245439 ↗
30. Sliding friction mechanisms of boundary-lubricated layered surfaces: Part II—Theoretical analysis10.1080/10402009108982036 ↗
31. Investigation of the wear behaviors of Ag/Cu multilayers by nanoscratch10.1016/j.wear.2008.04.025 ↗
32. Evaluating abrasive wear of amorphous alloys using nanoscratch technique10.1016/j.intermet.2004.02.014 ↗
33. Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers10.1016/j.apsusc.2008.12.001 ↗
34. Nanoindentation mapping of the mechanical properties of human molar tooth enamel10.1016/S0003-9969(02)00006-7 ↗
35. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗