Size effect on friction and wear mechanisms of bulk metallic glass
Source abstract
Abstract
Abstract This paper investigates the effect of sample size on the friction and wear of a bulk metallic glass (BMG), Ti40Zr25Ni3Cu12Be20. The sliding tests were conducted on a pin-on-disk tribometer and the microstructural analyses were carried out by SEM and TEM. It was found that friction and wear of BMG change with sample size. The fracture strength and plasticity of BMG play a central role in the mechanism variation of friction and wear. When the pin diameter is 5 mm, the wear track showed typical abrasive morphology (without noticeable ductile features) containing shear bands which resulted in maximum wear under this condition. With the decrease of sample size, ductility and fracture strength of BMG increased, resulting in higher wear resistance and friction for smaller samples. The paper also concluded that the observed variations in mechanical and tribological properties of BMG with sample size are not due to the cooling rate effect or geometric instability or tilting of the specimen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Thermal expansion behavior and structure relaxation of ZrTiCuNiBe bulk amorphous alloy10.1016/S1359-6462(03)00240-9 ↗
2. Recent progress in bulk glassy, nanoquasicrystalline and nanocrystalline alloys10.1016/j.msea.2003.10.159 ↗
3. Understanding the friction and wear mechanisms of bulk metallic glass under contact sliding10.1016/j.wear.2013.04.022 ↗
4. Effects of environmental temperature and sliding speed on the tribological behaviour of a Ti-based metallic glass10.1016/j.intermet.2014.03.011 ↗
5. On the estimation of interface temperature during contact sliding of bulk metallic glass10.1016/j.wear.2014.08.009 ↗
6. M.L. Rahaman and L. Zhang, Interface temperature during contact sliding of two solids: Relationship between predicted flash temperature and the experimentally measured. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology231(1), pp. 3–13, 2017.
7. Compressive plasticity and toughness of a Ti-based bulk metallic glass10.1016/j.actamat.2009.11.013 ↗
8. Bulk metallic glasses: smaller is softer10.1063/1.2696502 ↗
9. Size-dependent “malleable-to-brittle” transition in a bulk metallic glass10.1063/1.2969784 ↗
10. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
11. Size-dependent plastic stability of Zr-based metallic glass10.1016/j.msea.2015.08.062 ↗
12. Surface roughness effect on the friction and wear of bulk metallic glasses10.1016/j.wear.2014.11.030 ↗
13. Size effects on the fatigue behavior of bulk metallic glasses10.1063/1.3664846 ↗
14. Wear resistivity of super-precision microgear made of Ni-based metallic glass10.1016/j.msea.2006.02.300 ↗
15. Wear resistance of Zr-based bulk metallic glass applied in bearing rollers10.1016/S0921-5093(04)00973-6 ↗
16. The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass10.1016/j.matdes.2014.01.067 ↗
17. British · 1964
18. Sliding wear behaviour of some Fe-, Co- and Ni-based metallic glasses during rubbing against bearing steel10.1023/A:1019191303146 ↗
19. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗