Effect of transverse current injection on the tribological properties of WC cemented carbide
Source abstract
Abstract
Abstract The effect of an electric current on the tribological properties of WC cemented carbide were studied. Cemented carbide bars having a composition of 90% WC, 8% Co, 1.8% TaC, 0.2% NbC with dimensions of 5×6.5×20 mm were mounted in a sclerometer. A d.c. current with densities in the range of 0–90°A/cm2 was injected parallel to the long axis of the bar during the test. The surfaces were examined by scanning electron microscopy, and by X-ray photoelectron spectroscopy. To measure wear and friction, an indenter with loads of 1.5 and 3.5 N was drawn over the surface of the test sample with a controlled velocity of 0.2 mm/s for 100 cycles. It was found that the scratching process fractured the carbide grains. The fractured carbides were agglomerated and compacted, forming a thick tribo film. Tungsten oxide WO3 was found in the scratch track after scratching with current injection. With the injected current of 90 A/cm2 the track width increased by a factor of 1.4 and 3 and the friction coefficient increased by a factor of 1.5 and 2 with a load of 1.5 and 3.5 N, respectively, as compared to scratching without a current.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Electroplasticity — the effect of electricity on the mechanical properties of metals
2. The effect of current on the friction of carbon brush materials10.1088/0508-3443/15/1/304 ↗
3. Friction coefficient variation in graphite–graphite dynamical contact crossed by an electric current10.1016/0257-8972(93)90272-P ↗
4. Influence of the electrical current on the graphite surface in an electrical sliding contact10.1016/0257-8972(95)02626-6 ↗
5. N. Parkansky, A. Ben-Shalom, R.L. Boxman, L. Kaplan, S. Goldsmith, H. Yaloz, M. Nathan, Method of producing transparent and other electrically conductive materials, US. Patent 5,514,229, 7 May (1996).
6. N. Parkansky, A. Ben-Shalom, R.L. Boxman, L. Kaplan, S. Goldsmith, H. Yaloz, M. Nathan, Method of producing transparent and other electrically conductive materials. US. Patent 5,795,631, 18 August (1998).
7. The effect of electricity on the mechanical properties of WC–CO alloy10.1515/JMBM.1998.9.4.267 ↗
8. Arc erosion reduction on electrical contacts using transverse current injection10.1109/27.640663 ↗
9. Improvement of thin film semiconductor conductivities using a transverse current during deposition10.1016/0257-8972(94)90180-5 ↗
10. Influence of transverse current during In–O vapor deposition10.1016/0257-8972(95)02588-X ↗
11. J.F. Moulder, W.F. Stickle, P.E. Sobol, K.D. Bomber, Handbook of X-ray Photoelectron Spectroscopy, Perkin-Elmer Corporation, Physical Electronics Division 1992.
12. A model of brittle-dominated wear due to delayed fracture (vertical crack growth)10.1016/0043-1648(95)06655-1 ↗