Promaxon-D reinforced brake-pads to ameliorate the noise-vibration performance
Source abstract
Abstract
Abstract A synthetic hydrated calcium silicate (commercially available as Promaxon-D) is used as one of the ingredient in some friction materials (FMs) since it has the ability to improve the porosity of the product due to its very special crystalline structure. The present work aims to evaluate the detailed noise and vibration (NV) performance of Promaxon-D (PD) based pads in comparison with the non-PD based ones. Five different types of Cu-free brake-pads were developed with identical composition but varying wt.% of PD particles (0, 5, 10, 15, and 20) and compensating the difference with barite, a space filler. After characterizing these brake-pads for physical and mechanical properties, NV performance was evaluated following SAE J2521 test standard and also the friction-performance based on the data generated on the same rig. As the PD contents increased, the brake NV performance improved considerably for the selected operating conditions. In view of the overall improvement in both noise and vibration aspects, the pad with 20 wt.% PD (P20) performed best with an overall ~ 3 dBA drop in noise level and ~11% drop in vibration vis-a-vis PD-free pads leading to a conclusion that 20 wt.% PD may be used for improving the NV performance of brake-pads and also increasing the friction level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Railway Engineering and Dynamics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Department of Transport-Reported road accident in Great Britain, annual report 2018, https://www.thisismoney.co.uk/money/cars/article-7520371/Defective-brakes-tyres-cause-road-accidents-Britain.html. (accessed September 20, 2020).
2. A study of disc brake high frequency squeals and disc in-plane/out-of-plane modes10.4271/2003-01-1621 ↗
3. The integrated test concept: dyno - Vehicle, performance - Noise10.4271/2000-01-2774 ↗
4. Squeal propensity characterization of brake lining materials through friction noise measurements10.1016/j.ymssp.2019.03.034 ↗
5. The effect of phenolic resin, potassium titanate, and CNSL on the tribological properties of brake friction materials10.1016/j.wear.2007.03.004 ↗
6. How do grooves on friction interface affect tribological and vibration and squeal noise performance10.1016/j.triboint.2016.12.043 ↗
7. On the potential of uncertainty analysis for prediction of brake squeal propensity10.1016/j.jsv.2016.05.023 ↗
8. The role of friction film in friction, wear and noise of automotive brakes10.1016/0043-1648(91)90226-K ↗
9. The roughness effect on the frequency of frictional sound10.1016/j.triboint.2005.11.010 ↗
10. Brake comfort - a review10.1080/00423110903100432 ↗
11. Noise performance improvements and tribological consequences of a pad-on-disc system through groove-textured disc surface10.1016/j.triboint.2016.05.030 ↗
12. Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: a critical assessment10.1016/j.envpol.2015.09.024 ↗
13. Lewis · 2019
14. Brake friction material - restrictions on use
15. A step towards replacing copper in brake-pads by using stainless steel swarf10.1016/j.wear.2019.02.019 ↗
16. Pin-on-disc investigation on copper-free friction materials dry sliding against cast iron10.1016/j.triboint.2017.10.037 ↗
17. Friction and wear responses with metallic composite materials to replace Copper and Copper alloys in brake pad formulations10.4271/2016-01-1912 ↗
18. Friction performance of eco-friendly Cu-free brake materials with geopolymer matrixes10.4271/2013-01-2026 ↗
19. Development of copper-free eco-friendly brake-friction material using novel ingredients10.1016/j.wear.2016.01.023 ↗
20. Dry sliding behavior and friction layer formation in copper-free barite containing friction materials10.1016/j.wear.2017.12.008 ↗
21. Copper-free brake-pads: a break-through by selection of the right kind of stainless steel particles
22. Joint development of copper-free low steel brake pads for light vehicles
23. Exploration of plasma treated stainless steel swarf to reduce the wear of copper-free brake-pads10.1016/j.triboint.2019.106111 ↗
24. Performance and evaluation of eco-friendly brake friction materials10.1016/j.triboint.2010.05.001 ↗
25. Tribological properties of solid lubricants (graphite, Sb2S3, MoS2) for automotive brake friction materials10.1016/j.wear.2005.04.003 ↗
26. Friction and wear of Cu-free and Sb-free environmental friendly automotive brake materials10.1016/j.wear.2012.12.046 ↗
27. Kalel · 2020
28. Propensity to noise and vibration emission of copper-free brake-pads
29. Promaxon® D in NAO Non steel disc pad formulations: the importance in the third body layer and its effect on brake noise
30. Efforts towards green friction materials10.1016/j.triboint.2019.03.049 ↗
31. Smeets · 2011
32. Debris trapping and space-varying contact via surface texturing for enhanced noise performance10.1016/j.wear.2017.11.013 ↗
33. Chaos in brake squeal noise10.1016/j.jsv.2010.09.009 ↗
34. Contact surface topography and system dynamics of brake squeal10.1016/j.wear.2008.04.049 ↗
35. A combined analysis of heat conduction, contact pressure and transient vibration of a disk brake10.1504/IJVD.2009.027121 ↗
36. Automotive disc brake squeal10.1016/S0022-460X(02)01573-0 ↗
37. Influence of disc topography on generation of brake squeal10.1016/S0043-1648(99)00064-2 ↗