journal article·2024-02

Effect of applied load on tribological behaviour of Ti–48Al–2Cr–2Nb alloy under oil-lubricated condition

Fenghe Wu, Ning Zhang, Yingbing Sun, Xiang Li, Zijian Liu, Yulin Yang

Wear· Volume 538-539
Publisher page

Abstract

With their low weights and excellent mechanical properties, TiAl alloys are expected to be applied in pistons to achieve energy savings and emissions reductions in internal combustion engines. The tribological behaviours of the Ti–48Al–2Cr–2Nb alloy against the QT600-3 material at different applied loads under oil-lubricated conditions were investigated in this study. The results showed that as the load increased, the friction coefficient and wear-scar volume significantly decreased. The wear surface of the TiAl alloy was analysed using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The wear mechanism of the TiAl alloy under oil lubrication conditions was mainly the combined effect of adhesive wear and oxidation wear, different from the wear mechanism under dry-friction conditions. Furthermore, by observing the cross-sectional morphology of the TiAl alloy after focused ion beam, it was found that the QT600-3 wear debris had compacted and accumulated on the surface of the TiAl alloy, preventing further contact between the TiAl alloy and the QT600-3. This study has the potential to accelerate the application of the Ti–48Al–2Cr–2Nb alloy in lightweight pistons.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Light-weight intermetallic titanium aluminides - status of research and development10.4028/www.scientific.net/AMR.278.551 ↗
2. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
3. The science, technology, and implementation of TiAl alloys in commercial aircraft engines10.1557/opl.2013.44 ↗
4. Sliding wear of TiAl intermetallics against steel and ceramics of Al2O3, Si3N4 and WC/Co10.1016/j.wear.2006.01.044 ↗
5. Materials for a non-steady-state world10.1007/s11663-016-0655-4 ↗
6. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
7. Oil-soluble ionic liquids as antiwear and extreme pressure additives in poly-α-olefin for steel/steel contacts10.1007/s40544-017-0180-8 ↗
8. Overview of automotive engine friction and reduction trends–Effects of surface, material, and lubricant-additive technologies10.1007/s40544-016-0107-9 ↗
9. Experimental research on tribological characteristics of TiAlN coated valve plate in electro-hydrostatic actuator pumps10.1016/j.triboint.2020.106782 ↗
10. Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite10.1016/j.wear.2009.11.007 ↗
11. Fretting wear of Ti-48Al-2Cr-2Nb10.1016/S0301-679X(02)00142-1 ↗
12. High-temperature sliding wear behavior of an intermetallic γ–based TiAl alloy10.1016/j.wear.2018.11.025 ↗
13. Sliding wear behaviour of two gamma-based titanium aluminides10.1016/S0043-1648(00)00334-3 ↗
14. A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants10.1016/j.cirpj.2022.11.016 ↗
15. Effect of TiB2 on dry-sliding tribological properties of TiAl intermetallics10.1016/j.triboint.2013.02.006 ↗
16. Tribological behavior of additive manufactured γ-TiAl by electron beam melting10.1007/s12666-020-01950-8 ↗
17. Effects of environment on dry sliding wear of powder metallurgical Ti-47Al-2Cr-2Nb-0.2W10.1016/j.intermet.2014.02.021 ↗
18. High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics10.1016/j.intermet.2012.06.013 ↗
19. Electrochemical corrosion and tribological evaluation of TiAl alloy for marine application10.1016/j.triboint.2017.06.027 ↗
20. Effects of niobium particles on the wear behavior of powder metallurgical Γ-TiAl alloy in different environments
21. Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800°C10.1016/j.wear.2013.04.009 ↗
22. Modification of tribology and high-temperature behavior of Ti-48Al-2Cr-2Nb intermetallic alloy by laser cladding10.1016/j.apsusc.2005.07.064 ↗
23. Tribological behaviour of TiO2 Atmospheric Plasma Spray (APS) coating under mixed and boundary lubrication conditions in presence of oil containing MoDTC10.1016/j.triboint.2017.10.003 ↗
24. Wear resistance of TiAl intermetallics by plasma alloying and plasma carburization10.1016/j.surfcoat.2006.07.144 ↗
25. Tribological properties of titanium alloys under lubrication of SEE oil and aqueous solutions10.1016/j.triboint.2016.11.040 ↗
26. The problem of welding cast irons is examined taking the example of a spheroidal cast iron10.1080/09507119809448961 ↗
27. Novel in situ tribo-catalysis for improved tribological properties of bio-oil model compound10.1016/j.fuel.2017.10.080 ↗
28. Wear resistance of high nodule count ductile iron10.1016/S0043-1648(02)00171-0 ↗
29. Tribological properties of glass fibre-reinforced Nylon 66 and quenched ductile iron against Al2O3 counterpart under oilfield water lubrication10.1177/1350650111406331 ↗