Study of the effects of damage accumulation on wear
Source abstract
Abstract
Abstract Numerous wear equations based on distinct models to predict the wear, are available in the literature. However, most of these models require properties that usually are not easy to obtain, and simple models derived from the Archard equation remain the main base to use in practical situations, by engineers and designers, to predict product life. This equation predicts that wear is a linear function of sliding distance and load, which agrees with several real cases. One important aspect that is neglected in laboratory, in the evaluation of wear rates, is that the tests performed under conditions of uniform contact do not reflect what very often happens with equipments that have operating regimes that can vary from periodic or random and change those contact conditions. Because the additivity is a property of linear functions, this work aims to discuss the application of the additivity property to the Archard equation. A pin-on-disc technique was used to test a hard steel 100Cr6 sphere against a gray cast iron disc. These materials were selected to minimize the adhesion wear component. Different contact conditions, namely normal loads and sliding distances, were investigated to establish a linear basic equation to test as a model to take into account the accumulation of damage resulting from the step loading conditions studied, applying successive different blocks of load. Friction was measured along the experiments and an energetic model was discussed as an alternative way to model the wear. At the end of the tests SEM observations were used to evaluate the wear mechanisms based on the wear scar morphologies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Tribology and Wear Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Guide to friction, wear, and erosion testing
2. The significance and use of the friction coefficient10.1016/S0301-679X(01)00050-0 ↗
3. On the nature of running-in10.1016/j.triboint.2005.07.020 ↗
4. Blau · 1989 · 476
5. Blau · 1996 · 426
6. Wear models and predictive equations: their form and content10.1016/0043-1648(95)90158-2 ↗
7. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
8. Frictional strength and wear-rate of carbonate faults during high-velocity, steady-state sliding10.1016/j.epsl.2013.08.050 ↗
9. Experimental and numerical analysis of dry contact in the pin on disc test10.1016/j.wear.2012.12.005 ↗
10. Links between energy dissipation and wear mechanisms in solid epoxy/epoxy sliding contact10.1016/j.triboint.2014.04.009 ↗
11. Fundamental wear mechanism of metals10.1016/S0043-1648(03)00273-4 ↗
12. An energetic approach to friction, wear and temperature10.1016/j.wear.2003.10.010 ↗
13. Improvement of the adhesive wear resistance of steel by nitriding quantified by the energy dissipated in friction10.1016/j.wear.2004.09.058 ↗
14. Wear rate, frictional temperature, and energy consumption of steel 52100 with different microstructures during sliding10.1007/s10853-005-1508-8 ↗
15. An energy-based model for the wear of UHMWPE10.1007/s11249-006-9159-8 ↗
16. Simulation of wear on sheet metal forming tools—an energy approach10.1016/j.wear.2008.04.039 ↗
17. The relationship between wear and dissipated energy in sliding systems10.1016/j.wear.2005.02.121 ↗
18. Tribology, a systems approach to the science and technology of friction, lubrication and wear
19. A reliability model for friction and wear experimental data
20. Tribologically transformed structure in fretting10.1016/S0043-1648(00)00464-6 ↗