Tribological properties of Ni3Al-Ti3SiC2-MoS2 composite films deposited on textured surfaces by electrohydrodynamic atomization
Source abstract
Abstract
This study aims to provide a convenient process for improving the tribological properties of Ni 3 Al matrix composite films. A sharkskin-inspired microtexture was developed using laser surface texturing technology on a GH3044 superalloy. Electrohydrodynamic atomization technology was subsequently utilized to deposit Ni 3 Al matrix composite films on the substrate surfaces. The corresponding synergistic tribological behavior of Ni 3Al matrix composite films and laser surface texturing was evaluated through friction tests. Results indicated that the Ni 3Al matrix composite films containing 8% Ti 3SiC 2 and with a sharkskin-inspired microtexture exhibited good anti-friction properties and wear resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Tribological evaluation on Ni3Al-based alloy and its composites under unlubricated wear condition10.1016/j.wear.2010.10.060 ↗
2. Nano-sized aluminum oxidereinforced commercial casting A356 alloy matrix: evaluation of hardness,wear resistance and compressive strength focusing on particle distribution in aluminum matrix10.1016/j.compositesb.2013.04.038 ↗
3. Tribological performance of Ni3Al-15 wt% Ti3SiC2 composites against Al2O3, Si3N4 and WC-6Co from 25 to 800 °C10.1016/j.wear.2013.03.034 ↗
4. Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating10.1016/j.surfcoat.2006.09.106 ↗
5. Microstructure and wear performance of electro-sprayed self-lubricating Ni3Al/Cr3C2-MoS2 composite films10.1016/j.surfcoat.2021.127862 ↗
6. Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites10.1016/j.compositesb.2014.10.052 ↗
7. The effect of compositional tailoring on thethermal expansionand tribological properties of PS300: a solid lubricant composite coating10.1080/10402009708983703 ↗
8. Synergetic effects of surface texturing and solid lubricants to tailor friction and wear-a review10.1016/j.triboint.2020.106792 ↗
9. Tribological behavior of Ti3SiC2/(WC-10Co) composites prepared by spark plasma sintering10.1016/j.matdes.2012.08.069 ↗
10. Preparation and tribological properties of Ni3Al matrix self-lubricating composite coating
11. Electrohydrodynamic spraying functioning modes: a critical review10.1016/0021-8502(94)90199-6 ↗
12. Wear performance of electrohydrodynamically atomized WS2 coatings deposited on biomimetic shark-skin textured surfaces10.1016/j.triboint.2019.02.015 ↗
13. Surface texturing using pulsed air arc treatment10.1016/j.wear.2006.11.043 ↗
14. Development of a form rolling micro surface texturing system for friction reduction application in the shaft component10.1177/0954406216661008 ↗
15. Influence of surface texture on boundary lubricated sliding contacts10.1016/S0301-679X(03)00104-X ↗
16. Laser treatment of zirconia surface for improved surface hydrophobicity10.1016/j.jallcom.2014.11.069 ↗
17. Fabrication of WS2/C composite coatings via electrohydrodynamic atomization and their tribology behaviours10.1016/j.apsusc.2020.148128 ↗
18. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
19. Using a Ni-Zn solid solution layer to produce high-barrier height Schottky contact to semipolar (2021) n-type GaN10.1016/j.jallcom.2020.157003 ↗
20. Surface reactivity of α-Al2O3 and mechanisms of phosphate sorption: in situ ATR-FTIR spectroscopy and potential studies10.1016/j.jcis.2009.10.057 ↗
21. Composition effects on photooxidative membrane destabilization by TiO2 nanoparticles10.1016/j.jcis.2020.09.046 ↗
22. Direct gas phase synthesis of amorphous Si/C nanoparticles as anode material for lithium ion battery10.1016/j.jallcom.2021.159315 ↗
23. Fabrication of Cr-Si-N coatings using a hybrid high-power impulse and radio-frequency magnetron co-sputtering: the role of Si incorporation and duty cycle10.1016/j.surfcoat.2020.126378 ↗
24. Mechanical properties and oxidation behavior of W-Si-N Coatings10.1016/j.surfcoat.2019.07.075 ↗
25. Fabrication and tribological behavior of self-lubricating composite impregnated with synthesized inorganic hollow fullerene-like MoS210.1016/j.compositesb.2020.108557 ↗
26. Enhanced tribological properties of Y/MoS2 composite coatings prepared by chemical vapor deposition10.1016/j.ceramint.2020.06.157 ↗
27. Surface roughness and contact angle10.1021/j150474a015 ↗
28. Diffusion of sulphur in iron-chromium alloys10.1016/0036-9748(82)90265-4 ↗
29. Nanostructured TiO2 thin films prepared by RF magnetron sputtering for photocatalytic applications10.1016/j.apsusc.2017.06.068 ↗
30. Tribological properties of WS2 coatings deposited on textured surfaces by electrohydrodynamic atomization10.1016/j.surfcoat.2018.08.011 ↗
31. An aqueous polymer two-phase system as carrier in the spray-drying of biological material10.1006/jcis.2000.6740 ↗
32. Improving adhesion of powder coating on PEEK composite:influence of atmospheric plasma parameters10.1016/j.apsusc.2015.09.148 ↗
33. Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing10.1016/j.wear.2014.02.017 ↗
34. High-strength printed ceramic structures for higher temperature lubrication
35. Physical study of Eu doped MoO3 thin films10.1016/j.jallcom.2016.06.022 ↗
36. Ti3SiC2: a damage tolerant ceramic studied with nano-indentations and transmission electron microscopy10.1016/S1359-6454(03)00091-0 ↗